Reviews
fully functional
Purchased to run Circuit. I hope to protect the Brake/ClutchLever by installing this Lever Guard.
However, installation may be a bit tricky, since the weight in the handlebar needs to be removed or pushed in the back.
View detail
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
SUPERNOW has been wonderful to deal with.
The hole diameter was not correct and when I contacted them, they immediately replied that they would send the correct product.
He also guessed that a long Bolt was needed for the adjustment and enclosed it as well.
I thought it would take a long time since the response was by email, but I was surprised at the fairly quick response.
I would like to ask for more in the future.
View detail
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
The hole in the Lever GuardBody does not match the bolt size. The hole is too small.
The hole in the lever guard for mounting on the handlebar is smaller than the bolt diameter.
By the way, I tried to install it on a ZX-10R 2019, but the Lever Guard alone interferes with the Brake lever, so I need a 10-15mm collar on the Handlebar End→Bolt may also need to be re-arranged.
View detail
Fits: HONDA glom, HONDA MONKEY125
Comfortable over 70 km
Knuckle guard for wind protection for winterQuantity:The Knuckle guard windshield is just for comfort. Overall, I am satisfied with the product, but I think the price is a bit high. View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, Others , KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA XSR155, YAMAHA YZF-R25, YAMAHA XMAX250, HONDA CB400SF, HONDA CBR250RR, HONDA CBR650R, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
First of all, Cool.
Throttle operation is not affected at all.
Now it's up to the car inspectors. (Full width)
View detail
Babyface Lever Guard
About quality and texture Hard aluminum feel. Looks sturdy and able to restand drop I guess. About the feeling of use Length is adjustable. Able to fit together with my gale speed brake pump and clutch original length Products to buy together Bought together with babyface end bars that fits directly to the original handlebar. Difficulty of installation Easy to installation with less then ten minutes. Cost performance and comparison with other products Price and outlook will not be losing out to other competitors brand. About shipping and packaging Well plastic packaging. No issue when received item Any concerns, cautions, or advice when purchasing Need to find matching end bars for your bike. If it fits no issue installing the guard. There's a bit of gap on the Original handle bar. But I think it's not an issue. View detail
Axel will not turn.
The screw on the Axel side is too long, and when it is tightened, the Throttle will not turn. I recommend you to use a m6×30 Screw. 35 might work, but I used 30. I wonder if the manufacturer has really tried it? I wonder. View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, SUZUKI GSX-S1000F, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB400SF, HONDA CBR250RR, YAMAHA YZF-R25, YAMAHA XMAX250, YAMAHA XSR155, KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA MT-125, YAMAHA YZF-R125, YAMAHA YZF-R15, SUZUKI V-Strom250
Parenthesis good!
Anyway, it looks Parenthesis good!
Since I am not going to Race, I put it on with Dress-up.
Combined with the Brand YOSHIMURA, the satisfaction level is high.
I think the color of Blue was a little lighter than Image. Well, that is not good or bad, as it depends on the individual.
The weight is about 160 g. I chose a similar weight for the Left Bar End.
I installed it on a cbr250rr, but please be careful when referring to it as it has been replaced with a Handlebar from Over RACING.
View detail
![[Replacement] Antler Handguard Guard Kit](https://img.webike-cdn.net/catalogue/images/76503/ZE73-1911_01_TS.jpg)
I'm glad we have Replace, though.
Enduro racer (YZ125X) Used in.
I'm glad to be able to replace the right side of the screen because it breaks down frequently, but I wonder if it is a habit of mine to break only the Right side, and there are several Lefts left over.
Quantity:Pair (for Left and Right) I would be more than happy if it were sold separately, so I hope to see improvements.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, KAWASAKI Ninja ZX-6R, KAWASAKI Z650RS, KAWASAKI ELIMINATOR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-25R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250
Feels cheap, not the best finish.
About quality and texture - not the best quality for price. About the feeling of use - feels ok Cost performance and comparison with other products - Too pricey. View detail
Yoshimura brake lever fan
I have a lot of trust in the Yoshimura brand.
and the design is pretty
I can't say the price is cheap, but I don't think it's expensive either.
The Yoshimura red point suits my silver bike very well, and I really like it for ornamental purposes rather than functionality.
-------------------------------------------------- -------- I trust Yoshimura brand a lot And the design is pretty The price is never cheap, but I don't think it's expensive. Yoshimura Red Point suits my silver adverb bike so well and I like ornamental rather than functionality Powered by Google Translator
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
PinpointAttachment
It's a Lever Guard on the Brake Side. It's a good design and perfect for Accent.
I'm sure you'll be useful in Circuit driving, but the reality is that I'm not that dead heat.
The Clutch Side Bar End is also included in the package.:Pair (for Left and Right) It is good that Balance is taken without any difference in the
However, the Bar End does not have the same weight as the OEM and I was a little worried about vibration.
I was surprised that I did not feel any discomfort from the Large Chick when I took a short trip on the highway to the Yamasaka Road.
6R doesn't seem to have much vibration.
Sometimes people say they ride with their arms or their hands hurt, in which case they might be numb.
As a precaution, the positioning of the two ScrewGuard lengths should be decided in one shot. If you temporarily fix them a little stronger
Black paint has peeled off and left Screw marks. Most of the time, it should be the shortest and Large sturdy. (Tears)
Lastly, come to think of it, I didn't have TRICKSTAR's Sticker attached. I don't care because I don't put it on. Crying
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
Installed to make it look Race ish!
Installed on CBR600RR this time.
I installed the Lever Guard because I thought it would make the car look more race-ready!
Originally, it was designed to prevent the brake lever from falling over during a race when it made contact with another car.
We do not know if it will protect Lever in the event of a fall.
If I wanted to install this, I would need to replace the Handlebar End with one made by BabyFace.
The Bar End and Lever Guard by BabyFace were installed to make it a much more race ish!
I am satisfied with both the appearance and quality.
I don't know if it will be Demerit, but the Gold amount seems a little high.
View detail
Fits: その他
Handlebarfor Replacement
I purchased this product to change the handlebar diameter when replacing a MORIWAKI handlebar with a ZETA handlebar. This product is a recommendation because there are many different types of Adapters to fit any handlebar diameter, so you can easily change the handlebar. View detail
The structure is difficult to fix.
I purchased the M6Spec. with the intention of using it on my NSF100.
M6UniversalSpec. but it cannot be pontooned on NSF100
So, it is necessary to insert a Bar End Spacer between the two.
However, the installation is a little loose in order to fix it to the Weight in the Handlebar.
You may want to consider a different installation MODEL for use in Circuit
Repair and Option Parts SolidBar End Spacer
Brand：POSH Faith:Posh Face Item number:031176-70-10
https://www.webike.net/sd/25039941/
View detail
In the Handlebar of SUPERNow.
I think the color of SUPER NOW Lever Guard is good for SUPER NOW Racing Handlebar. View detail
Fits: SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, MV AGUSTA F3 675, SUZUKI V-Strom1000, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI KATANA, MV AGUSTA F3 800 RC, YAMAHA XSR155, KAWASAKI Ninja650, SUZUKI GSX-R125, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650(ABS), SUZUKI SV650(ABS)
Look good!
I personally don't race, but I really wanted it because of the way it looked, so I bought it.
As I had expected, YOSHIMURA's Lever Guard is good in both shape and texture, and I am pleased with the Large change self.
I feel like a Racer (laughs).
I don't expect it to have much of an effect, but it adds to the atmosphere and looks good anyway!
(It was difficult to remove the bar end, but the installation itself is surprisingly easy.)
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
Race ish
Removal of OEMWeight may be … impossible for Beginner….
Installation is easy.
Stylish! Race ish!
Hoping it won't be useful.
Logo is vertical, so Quantity:Pair (for Left and Right) Possible.
View detail
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
？？？
Ummm, hmm….
I have a gap between Handlebar End and Lever Guard.
Is the conformation information correct?
View detail
Fits: YAMAHA MT-03, YAMAHA YZF-R3, SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI GIXXER SF250, SUZUKI SV650(ABS), SUZUKI SV650(ABS), SUZUKI SV650, YAMAHA YZF-R25, HONDA CBR250RR, SUZUKI GSX-R125, SUZUKI GSX-R125, HONDA CBR650R, HONDA CB400SF, HONDA CBR1000RR-R, HONDA CB1300SB, SUZUKI KATANA, SUZUKI GSX-S1000, HONDA CB1300SF
Not only is it functional, but it looks great!
YZF-R25.
The rigidity and texture are both excellent.
They will also serve perfectly as SafetyParts.
It never faded and is still shining after several months.
View detail