Reviews
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
Hunter grips as original
Hunter grips are like the original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend to everyone, I will still take. -------------------------------------------------- -------- Hunter flips as an original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend it to everyone, I will still take it. Powered by Google Translator View detail
Based on our experience with Road use
Domino even for offline use.
WafflePattern's hooks are also
It is not hard and exquisitely comfortable to hold.
Support for Ride on Forest Roads
Like Road, it has a short lifespan, but….
This is the only choice.
View detail
Stable
This is the only way to win anymore!
Short life span, though.
We'll call it a charade.
Good balance of moist and firm
Grip.
View detail
Genuine Domino Grips used on Yamaha MT10
I wanted a change from the Renthal dual compound grips I usually buy for this bike. Specifically, I wanted something other than grey to help blend the grips to the bike. I decided to go for the black and red lettering version. I have been told that these grips are super sticky so you should not lose function no matter what the weather conditions. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. When these arrived, they were in their own packet and no damage was done during transit. They are a really nice and sticky set of grips and as they should, have one for the throttle side wich is slightly larger in diameter to fit the throttle tube. With a little brake and clutch cleaner sprayed inside and then onto the actual bars and throttle tube, they slid on pretty easily. All I can say is, try them and you will find out just how sticky they actually are. Veyr good purchase and will get these again in the future. View detail
This is kind of a new texture!
GelType Grip was installed for the first time.
I thought it would be difficult to install because of its special shape, but Grip UP." The letters of the name were written on the
Positioning was easy.
The part that hits the palm of the hand is parallel, or rather, it protrudes at the very front.
This protrusion seems to be caught and it seems to be easy to cruise at high speed.
There is little vibration, and this is a new tactile sensation that will be very exciting.
View detail
Easy to operate even with muddy Gloves.
[How is it used?
After purchasing the vehicle used, we purchased a DRC-made Grip after hesitating between OEM and replacing the Grip that was already worn out.
We wanted a grips that could be operated securely even with wet or muddy gloves, as we also intended to use it for mountain activities.
Was the one you received as per Image?
I knew the design and comfort of the grip because it was installed on the vehicle of a friend who plays in the mountains, so the product was just as I had imagined.
Was the installation difficult?
All you have to do is remove the old Grip and install the new Grip you have just purchased.
If the old grips are sticking, they can be removed relatively easily by gently inserting a fine -driver between the handlebar and the grips and spraying some parts cleaner into the open space (or using an air compressor if you have the right equipment). (If you have the right equipment, you can also use an air compressor to remove the parts.)
After the old grips are removed, degrease the inner diameter side of the new grips and handlebar with parts cleaner, and after drying, apply a thin coat of RubberBond to the handlebar and insert the new grips.
Wait half a day to a day for RubberBond to dry and ride out.
How was your experience with it?
Like Yamaha's OEMGrip, it has an uneven surface on the waffle, making it easy for the user's fingers to catch.
Is it the difference in Material? Is it simply because they are new? I am thankful that the vibration is reduced so that my fingertips do not become numb (but not completely numb) even after long hours of driving.
Furthermore, since it is an open end type, it is very easy to install the handlebar guard without the need to drill the grip end by yourself.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) This is a Grip-only product of
[Was there anything that disappointed you?
Personally, I don't have any. The price is Reasonable and I would like to purchase Repeat when the current Grip I am using is due for replacement.
Other items that would be helpful
Point and hang of installation
Please install the RubberBond so that the waffle-like part is at the fingertip position when you ride.:Pair (for Left and Right) should be adjusted so that it is in just the right position.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual... Well, I don't think there is any problem because this product is so easy to understand that I don't think you need an Instruction Manual if you want to buy this product and replace it.
[Notes]
Although it is unlikely that you will make a mistake, the inside diameter of the grip for Right (Axel side) is different from that for Left, so please check carefully before installation.
[ITEMS TO BUY TOGETHER
Nothing in particular, but since the shipping cost for this Single Body alone is not included, it would be possible to purchase other items to make the total amount over 3,000.
[Opinions and requests to Manufacturer
Black and Orange at the time of writing the Review (July 8, 2023). Temporarily out of stock. instead of Discontinued. Is there an alternative product available?
If there are no alternative new products, please continue to sell them.
View detail
moderately easy to use
[How is it used?
Grip of YAMAHA XJR400R was worn out and replaced.
YAMAHAOEM→HONDAOEM→DOMINO in that order.
How was your experience with it?
The grip is the most comfortable as it is called Street Type.
I like the OEM look when it comes to design, but I bought this one to try it out because it became numb easily after I changed to Separate handle. The color is Black×Color:Gray
It is moderately absorbent, so I have the impression that it is versatile for touring and mountain passes.
The rest is how durable it is.
How did it compare to other products?
I think the performance of the Grip itself is good compared to the OEM.
And the price is not that different from OEM.
As for durability, I think that Grip should be replaced after 10,000 km, so I hope it will last that long.
Rumor has it that the Domino lettering will come off soon, so I'm looking forward to seeing what happens.
[Points to note]
Grip adhesive is used for mounting.
I'm sure many of you don't wear them relatively often, but what do you think?
[Accessories]
Two types of Stickers and Instruction Manual were included.
View detail
The best
The response was fast and the product was a good product.
I am satisfied
View detail
I use it for two cars.
neither good nor bad
Isn't it?
Grip selection is quite difficult.
I decided on the design and price.
View detail
comfortable to hold
It seems to be less stressful on the palm of the hand than holding the Grip directly. (This is my personal impression). View detail
Design, Grip◎ and high cost performance!
[How is it used?
Since the normal grip was getting old, we wanted to renew it with a shape that would not tire us out over long distances, and we found this grip with a softer grip that is more comfortable to hold.
Was the one you received as per Image?
The shape and quality were as per Image.
The length was not as short as I expected compared to NORMAL, about minus 5mm.
Was the installation difficult?
First of all, Quantity:Pair (for Left and Right) but check theQuantity:Pair (for Left and Right) Since it is not a symmetrical cylindrical shape, mistakes are unlikely to occur. Even if you are not sure, you can recognize the Throttle side by looking at the shape of the hole, which is slightly wider than the other side.
The installation was tight only for the new grips, and the insertion was quite large and strange.
I screwed in the handlebar and grips while spraying CRC, and while the Throttle side went easily, the Blinker switch side was particularly tough.
And because it is slightly shorter than the Normal grip, I diverted the for Motorcycle grip lock and used it instead of the Spacer.
How was your experience with it?
The slight Ergo shape makes the grip comfortable and less tiring over long distances.
I feel that dirt will accumulate on the unique Dimple, but I am satisfied with the Coloring as I was able to match it with the Tank color.
[Included Parts:were they on?
Pac Cage ONLY and no other.
[Was there anything that disappointed you?
This Grip has an overall length of 122mm, which is about 9mm shorter than the NORMAL, and I wish it had the same length, but I wanted it to be at least 125mm, which is a common Size.
▼It would have been nice to have a Lineup with different overall lengths for each Motorcycle Size.
View detail
Easy to grip
I changed from their Gel grip for touring to this model in order to change my klx250 from TouringSpec. to EnduroSpec. In a good sense, the Handlebar Grip can now feel the road surface conditions, making it easier to ride on forest roads. Naturally, it is easier to ride for a long time on long touring roads with the previous Gel grip because the vibration is reduced, but that is not the purpose of this product. View detail
You'll know it when you hold it.
Valentino Rossi loved the RossiGrip.
It is true that the RossiGrip has a chewy grip that other grips do not have. And yet, it does not interfere with the road surface information transmitted by the front wheel, and the Control can also operate the Accelerator with a moderate grip force.
The color is pure black and the design is not outstanding. It may look like a bland OEM product, but once you hold it in your hand, you can tell that it is a Grip with a special attention to detail.
View detail
It's not the same as NORMAL.
Z900RS (fireball)
It was DominoTouristType Lime green just before, but the protrusion on the part that often hits it was torn off, so it was replaced.
Now choose Red, which seems to fit the fireball.
It looks and feels particular.
The grip is still soft and a little thicker.
It's a far cry from the stiffness of OEMs.
I see Motorcycles that are doing Custom, but surprisingly, they are not replacing the Grip!
Vibration and other factors can affect fatigue during touring, so I think this is a part that you should definitely try out.
The replacement work is often found on the Net, so you can refer to it (use Parts cleaner).
View detail
easy to grasp
The Rubber itself is not slippery, so I feel that I need less force to grip it. The grip had been tiring before the replacement, but it has been improved. View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA TW200, YAMAHA TW200E, YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400, YAMAHA SR500, HONDA FTR223, KAWASAKI Estrella RS, HONDA GB250 Clubman, HONDA magna fifty, KAWASAKI Estrella., KAWASAKI W400, KAWASAKI 250TR, KAWASAKI W650, YAMAHA TW225E, その他 22.2mm handle, YAMAHA TW200
Cosmo!
It was a replacement of OEMGrip for W650 and I think the atmosphere is very nice.
I especially like the Custom and old car feel.
I thought the Normal grip had a harder grip feel and was a little thin,
After the change, the grips have a moderately soft feel and the diameter is thicker, making it a good fit.
I didn't expect the workmanship because it was cheap, but there was no BALI and it was done well.
I think it is made.
View detail
Fits: HARLEY-DAVIDSON Dyna Convertible - FXDS-CONV 1994 - 2000, HARLEY-DAVIDSON Disc Glide - FXDG 1983, HARLEY-DAVIDSON Softail Springer Injected - FXSTS I 2001 - 2006, HARLEY-DAVIDSON Road Glide - FLTR 1998 - 2002, HARLEY-DAVIDSON Road Glide-Injected - FLTR-I 1998 - 2006, HARLEY-DAVIDSON Road King (EFI) - FLHR 2007, HARLEY-DAVIDSON Road King - FLHR 1994 - 2006, HARLEY-DAVIDSON Road King Classic (EFI) - FLHRC 2007, HARLEY-DAVIDSON Road King Classic Injected - FLHRC I 1998 - 2006, HARLEY-DAVIDSON Road King Custom (EFI) - FLHRS 2007, HARLEY-DAVIDSON Road King Custom - FLHRS 2004 - 2006, HARLEY-DAVIDSON Road King Custom Injected - FLHRS I 2004 - 2006, HARLEY-DAVIDSON Road King-Injected - FLHR-I 1996 - 2006, HARLEY-DAVIDSON Roadster - XLS 1982 - 1985, HARLEY-DAVIDSON Rocker (EFI) - FXCW 2008 - 2009, HARLEY-DAVIDSON Rocker C (EFI) - FXCWC 2008 - 2011, HARLEY-DAVIDSON Softail - FXST 1985 - 1993, HARLEY-DAVIDSON Softail Custom (EFI) - FXSTC 2007 - 2010, HARLEY-DAVIDSON Softail Custom - FXSTC 1986 - 1999, HARLEY-DAVIDSON Softail Night Train (EFI) - FXSTB 2007 - 2009
Simple and good.
It is good for those who prefer Simple and casual Custom.
Since it is combined with the throttle pipe, it was very easy to just replace it.
View detail
HondaOEMGrip
Used for Motoguzzi's 1100sport.
RossiGrip The HondaOEMGrip is nicknamed the "HondaOEMGrip".
I didn't want to be flashy, so I decided on this one right away.
I put it on and I'm convinced that VR continued to love it. I wish I had known about it earlier.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Easy to replace. The quality is appropriate for the price. I think it will last for a long time.
I raped the Handlebar Grip of the LETS4 replacement.
Perhaps the grip texture is different from the NORMAL (OEM Product), but this product has a mussed texture. In that sense, it does not slip.
*Working time is 20 to 30 minutes
After chopping off the old Grip with Scissors, I cleaned the old Bond by scrubbing and wiping, sprayed Parts cleaner on the new Grip and tube, and inserted it all at once.
*You can start over.
The Axel side inevitably feels uneven when you hold it, but since it is not an OEM product, this is to be expected.
The rest are fine, a little on the Large size and sticking out.
View detail
Thin Type
It is a thin type, so it is easy to grip for those with small hands. View detail