Reviews
I used it for Axle Shaft.
Weight reduction is the purpose of the biggest Large. It will be lighter weight under Spring.
It is a little light, but it will not rust, and the spicy shine of the Gold genus is nice Parenthesis.
Small I believe that efforts will produce Large Kid effect.
View detail
Fits: KAWASAKI ZZR1400
Easily change both solo and dual
【What made you decide the purchase?】 What can be done from the Dual Exhaust System to the solo Exhaust System in a simple way.
【How was it actually used?】 I was worried that the exhaust sound would become louder, but on the contrary it became a little smaller than before and I was beaten. The sound quality was more than I expected.
【Was it difficult to install? (Hard parts case)】 As the photograph attached to the handling Instruction Manual got it, I knew how to put it, but it was hard work lying down next to Motorcycle, so it was hard.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Looking at mounting photos to find places that can be installed without the most stress. Do not force it. To do Torque management.
[Is there anything I was disappointed about?] It was also in the Impre of the other person, but the product is shining in Polished and it stands out.
【Hope for Manufacturer - Please let me know if there are any improvement points; I wish I had a burning color of Stainless Steel from the beginning.
【Have you compared items?】 None.
[Others] I think that the Dual Exhaust System can be easily soloExhaust System, so that it is a good item with User's eyes.
View detail
Sounds good
It is for GSR-750 but it fits GSX-S1000F
Installation was troublesome because there is AXIS Tutora in a rather troublesome place
After attaching, strange sticks around 3000 will disappear and will go to Smooth
Idling's exhaust sound is almost unchanged
I hope the price is cheaper a bit - - -
View detail
t=2. With 0 there is no complaints 5 stars
Silencer Band Rubber attached to the Exhaust System started running and it got burned in about 15 minutes and it was so bad that Kemri got out, so I was looking for a heat resistant Elastic band and this was the only choice in Universal. t=1. It was subtle as to what would be like 5, but after all it was somewhat insufficient in thickness.
So we overlapped the remaining Band and made the gap as much as possible. There is no complaints about heat resistance. Thickness 2. I wish I had a 0 mm Lineup.
View detail
It was good to sell!
When installing Silencer of Universal, intermediate Pipe connecting Exhaust pipe and Silencer became necessary.
Exactly good outer diameter and bending Material : I found a Stainless Steel Pipe, but I needed a Spring hook to connect with Silencer and Exhaust pipe.
When searching with Webike, there are two companies handling, both of which are Material : 10 pcs with Stainless Steel. It was Set. For this reason I bought this cheaper product.
I welcomed Spring hook to Pipe at a welding shop who was indebted (Red circle in image).
By the way, I cut off the green arrow by myself with Thunder.
This Spring hook has no problem at the time of welding, after that, even if you actually apply Spring, I am satisfied because there is no problem.
However, Quantity : 2pc. I only needed Set but 10 pcs. What is only Set.. It was the best if there was a small quantity of packaging.
View detail
Purchase to install Universal Silencer
I bought only Exhaust pipe and Universal Silencer with Net, but since there was no Spring hook on the Exhaust pipe, I installed it. Since welding is necessary, we temporarily assembled and positioned it, brought it to a welding shop and welcomed it. View detail
Not particularly dissatisfied. The shape is good!
I attached it together with the Silencer band of the same Manufacturer.
The end of Rubber is standing and does not gap as it exactly matches the shape of Band.
The thickness was also good, there was no problem in Hold feeling.
View detail
They are goods indispensable to Chamber attachment of their own car. there is no production stop -- please come out. If there is nothing since it is consumable goods, it will be troubled dramatically. collect and stock -- it is -
They are goods indispensable to Chamber attachment of their own car.
there is no
production stop -- please come out.
If there is nothing since it is
consumable goods, it will be troubled dramatically.
collect and stock -- it is -- ~.
View detail
Fits: KAWASAKI ZZR1400
It will be a direction, and it will be a Recommendation if a Slip-on is used. , of course, it is also ZZR1400. The ALL MODEL could also be coped with by the Joint gasket, and attachment was also easy. It is if you dare to s
It will be a direction, and it will be a Recommendation if a Slip-on is used.
, of course, it is also ZZR1400.
The
ALL MODEL could also be coped with by the Joint gasket, and attachment was also easy.
It is if you dare to say an improving point... Or [
that I wanted the color to think that it is not conspicuous ] (sweat)
View detail
Thought purchase was carried out. Since the Edge portion stands although it is unclear, when using it for a Band thicker than this, it is necessary to cut with the picture the Edge portion which stands. I think that especially a wonderful point
Thought purchase was carried out.
Since the Edge portion stands although it is unclear, when using it for a Band thicker than this, it is necessary to cut with the
picture the Edge portion which stands.
I think that especially a wonderful point is a good thing since it melts although it is not, or there is also no thing problem.
View detail
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi.
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi. View detail
Fits: KAWASAKI ZZR1400
It is a Parts which two are taken out, only left-hand side closes a Slip-on muffler, and it carries out for taking out right 1. Is it the place called Ideas goods well? it is likely to be made also to carrying out left 1 appearance depending on
It is a Parts which two are taken out, only left-hand side closes a Slip-on muffler, and it carries out for taking out right 1.
Is it the place called Ideas goods well?
it is likely to be made also to carrying out left 1 appearance depending on
usage -- peevish [ come out and ] -- w
-- although mind which also carried out heat-resistant Black paint application and in which it is [ which is presence Ariari ] better to make it not conspicuous if it can w
do will also be carried out if it looks in at the bottom since the surface is merely a Polished in buffing ...
View detail
It purchased in order to equip the barrel 4-S silencer for trickers with a pure heat guard. The half of the width is carried out, and it cuts to two, and is using it, twisting inside a stainless pipe band. The adverse effect by heat is not seen.
It purchased in order to equip the barrel 4-S silencer for trickers with a pure heat guard.
The half of the width is carried out, and it cuts to two, and is using it, twisting inside a stainless pipe band.
The adverse effect by heat is not seen.
When purchasing the same heat-resistant rubber in the home center etc., I thought that it could equip similarly, but since the edge was attached to the rubber, the beauty has been equipped with this product along with the hose band.
View detail
a [buying motive] -- ZRX1200R ('06) -- -- r's gear: -- earls gear : sonic muffler product number Although :80001-411-00 was attached, since the silencer band rubber had deteriorated, this product was purchased. [Size] Since it is quite thinner than a
a [buying motive] -- ZRX1200R ('06) -- -- r's gear: -- earls gear : sonic muffler product number Although :80001-411-00 was attached, since the silencer band rubber had deteriorated, this product was purchased.
[Size] Since it is quite thinner than a - authentic positive silencer band rubber, if it cuts in a size exactly, a silencer will not be able to be fixed and it will shift.
Therefore, I took the method of fixing in piles a little less than 5 cm using die length of 40 cm of this product.
[Grading of goods] Since it is so so, is it a place as 3* as above-mentioned?
View detail