Reviews
Cospar good
This is Large sturdy, though it was thinner than I expected
The strength is fine and I will use it more and more
I would like to buy something a little thicker
View detail
You can also use it to change oil and wash parts
I bought this for Oilfor Replacement I wanted to get a Nozzle type for this type
In the product photo, there is no Cap at the end of the Nozzle, but the product I received has a Cap, and it is also available for storage Oil does not drip
Nozzle's Cap was a nice miscalculation
It's not inconvenient to use, but it's the same with a wider and less heightened oil receiver It would have been better if there was a product that could hold about the same amount of space It would definitely be easier to use that way
View detail
It's a lot of kindness
I bought this to measure the amount of oil in the front fork It's a good thing that it's a soft material and won't break when dropped
The ratio is also drawn for when making the mixture It's a thing
I don't know, I just started using it so I don't know, but I hope I don't get oil burned with long term use
View detail
Essentials for Wiring Process
Purchased at the same time as Bullet Type Terminal (sold separately)
Unlike those sold at Home center etc., Aftermarket The quality is close to that used by parts manufacturers and does not look cheap
It is even better if there is a Small division, such as 50 pieces
View detail
Essentials for Wiring Process
Purchased at the same time as Bullet Type Terminal (sold separately)
Unlike those sold at Home center etc., Aftermarket The quality is close to that used by parts manufacturers and does not look cheap
It is even better if there is a Small division, such as 50 pieces
View detail
Insulation Tube and Quantity:The fact that it's not a set is a negative
Purchased for the wiring process
It's not too cheap as Bullet Type Terminals tend to be, and practicality is not a problem It is not
The fact that the Insulation Tube is sold separately, despite its modest unit price The Minus point is that it is more expensive in
View detail
Insulation Tube and Quantity:The fact that it's not a set is a negative
Purchased for the wiring process
It's not too cheap as Bullet Type Terminals tend to be, and practicality is not a problem It is not
The fact that the Insulation Tube is sold separately, despite its modest unit price The Minus point is that it is more expensive in
View detail
Hard to grip
The price is low and the Wire is hard, so it's good for Rust drop
However, the grip part is simple, just a steel plate pressed into a U shape, so you need to put some force into it It hurts when I'm dropping Rust and it digs into my hand
Wearing work gloves or wrapping an extra piece of cloth around the grip will not do much good
Other than that, there are no other problems
View detail
I don't know
it takes a lot of time to prepare various parts and tools for the first time to adjust the carburetor I bought it I've been looking at the ratings, and I think it's fine for me as long as I get the benefits of the price View detail
ChainMaintenance is on its way!
The other day I used it for maintenance of the undercarriage, and the Tire rotates smoothly I was able to work efficiently with the
Because the body of the car is at an angle, the Tire is the Quantity:Pair (for Left and Right) There was no particular inconvenience to Slide to
I wish I'd bought one sooner, because up until now I've had to move the body back and forth to work on it!
I have no problems with the texture and quality
View detail
I think that it is very good..
Large is about a child's chair,
It is exactly good Large Kimono for maintenance of Motorcycle.
It is completely different if there is this or not.
Work has become quite easy.
I think that it is not a product to be damaged by purchase.
View detail
Wire got out of possession.
For exchange of Air valve, I thought that it was quicker to use the exclusive one, I tried using. The engagement with Valve and others worked well. After that, I thought that work was completed by raising Valve in the Valve hole in Wheel, and the Wire connected with Valve got out of the hole of the Gold genus that embedded the wire. The part that connects Valve and Wire is Large durable but the connection with Gold genus that pulls in the bottom is sweet, it pulled out with full power, the force can not fit in. In addition, I wanted you to raise the strength of this part and make a product that will not come out, I was dissatisfied with the overall evaluation. View detail
Easy to use
There is also a pour spout, buy from this O size of ForkOne Side think that this size is good.
With STAND, the Level of Oil quantity can also be confirmed by letting go, and using it, there was no problem as a function.
View detail
Easy to use
I bought it for Fork oil exchange. Size, it was JUST that the capacity is this Large.
It has a pedestal and has a lid, so it is convenient to keep it in Garage even after use. Even during actual use, there was a pour spout, so I could inject it without drooping Oil.
View detail
It is a useful tool
It is in use in the first Motorcycle, purchased for the second machine this time.
The thing which I bought before is Manufacturer difference or the price was about 2000 yen.
Because the shape is exactly the same, is it just the difference in price?
I expect durability.
View detail
It looks cheap but practical
When the item arrived, I thought it was crappy PlasticPlate.
I mentioned that you should use it in a flat place in the Instruction Manual.
But since I want to use is on the gravel, I can use it without problems if I use it with knowing to break. It was about dirty without break even after use.
Material : Because it is light, it's small, so carrying is no problem. I have not used it yet in the muddy, but I think that I can probably use it because there is also an area. Although it is cheap and it can be used as a disposable feeling, it is likely to be indebted for the time being.
I use it with BANDIT 1200.
View detail
It is useful unexpectedly
It is C650 GT, but Rear is good because there is a Center Stand, but Front
When washing, I found something good with internal medicine
It is unknown whether it can be used at 120 - 70 - 15 at the inquiry stage
Although it was thing, it was easy to say
In addition I could also use MONKEY w
If it says strongly, the bottom Rubber shifted soon, but I do not mind it
It does not get in the way of it, it is better to use something quite useful
View detail
One of the Items I'd like to use
I often adjust OEM's Memory with OEM's Memory, although I hear well that I can sloppily.
I have never felt any trouble.
However, regarding this tool, it is what purchased because reasonable situation can be convinced.
In CustomWheel etc, there are things that Offset makes, so it may not be necessary to become nervous.
View detail
It looks nice
As a performance I think that it is a Graduated cylinder, but it looks good, so it will be a picture just by putting it in Garage. It is safe because it can be lightly dressed exactly when changing Oil. View detail
It might be better than nothing ...
Originally intended purpose was to buy Clutch Spring of CYGNUS for replacement, but it was too hard for power to enter and eventually could not be used. However, it was enough for attaching and detaching Spring such as Exhaust System, so it was easy to work depending on the place to use. View detail