Reviews
Fits: YAMAHA Tracer 900, YAMAHA Tracer 900 GT
Expensive but useful
Side case, a bracket for installing the Ovid When you don't use the side case, it looks like the picture, and it is very easy to put on and off It's good because it's not too noticeable
I was hesitant to buy it because of its high price, but with the SCENE used for Touring, it was easy to put on and take off I think Merit is a good choice for Large, as it locks with a key to reduce the risk of theft It is
View detail
Fits: SUZUKI GSX-S750
It's pretty heavy
GSX-S750 with Hepco & Becker Tandem seat replacement rear rack I installed it I removed the existing Rear Sets and assembled the iron plate seat, but it was very heavy Sea Truck is well made, but there is a gap, and it was made of Urethane sponge Double-sided tape is attached to fill the gap It seems to be able to get out of the rain somehow, but I am worried whether the rain will penetrate from the Urethane sponge at the back It is I thought something needed to be done here But it's a very expensive product, and it's a money grabber for carrying a load You can also use this to install a rear box This is the best solution for a motorcycle with a bad loading capacity View detail
This makes the camping bag large and sturdy
I installed the Rear carrier extension plate on my GSX-S750 It is very well made by Hepco & Becker I installed Seat bag or Boston bag directly to Seat and went to touring and so on I used to have a carrier, but my luggage got dislodged while driving and I had to tie it back on the way I was looking for a good carrier, but I found a Seat at Hepco & Becker I found a Carrier that I can remove and install and ordered it right away This Plate is available in two types of Large size, NORMAL and Small Large also means Small It's not a big, but it's a NORMAL large threshold
Seat bag and camping bag (50L) are not so different from each other I installed it, and it fit in Balance well Side bag is also good I'm happy with the C-BOW Type and it's well put together
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP
You're not going to buy it
If you don't have the Pillion Bar, you can't get it up with the Single Body
I suppose you could stand it up with something thicker, like a magazine or something, and then you could stand it up, but then you'd be better off without it I felt it
View detail
Fits: KAWASAKI Z1000
Fit feeling beyond expectations
If you install the SeatBack on the OEM Tandem seat, it will lose its shape, but It is not deformed, tightly and stably fit and secure
It is easy to install and can be installed in less than 10 minutes
View detail
Fits: DUCATI Multistrada 1200 Enduro, DUCATI Multistrada 1200S, DUCATI Multistrada 1260 Enduro, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1260S, DUCATI Multistrada950, DUCATI Multistrada950S
very good
The shape of the blinker is so exquisite because it is only for the car model Large Satisfied
The height of the Guard is fixed, so when driving off, the Brake or Clutch If you want to change the height of the lever, be careful because you will only be able to move a small amount
Lever height can be changed if it is about 5mm up and down, but if it is more than that, it is not possible to change the height of this Guard and Blinker interferes
View detail
Fits: DUCATI Scrambler Sixty2, DUCATI Scrambler 800
Low accuracy
It gives me the peace of mind that it's better than no Engine Guard
? The Screw pile of the included Bolt was distorted and was not useful as it was
? The molding accuracy of each part is low, or it cannot be installed without forcing it into position
? There is a part where the plate bolts hold it in place, but the head of the plate bolts is not inclined to fit in
? In my case, the OEM footpeg, in the Lever position, my toes are in the Engine It may interfere with the Guard, which may interfere with the operation of the rear brakes, and may also interfere with Shift It may invite mistakes
View detail
I'm a worried Kit
This is the front and rear adjustment kit and it is marked as one set This side bag is labeled Quantity:Pair (for Left and Right) Separate and Quantity:Pair (for Left and Right) There are two ways to purchase this product:One set and Quantity:Pair (for Left and Right) At first I ordered two because I thought I needed two, but when I asked about it, I was told that it was only one and that it was Large and strong One is Canceled When I opened the package, I found out that it was Quantity:Pair (for Left and Right) I was relieved to see that there were four of them in the box As I thought, without this kid, Rear's Blinker would have been a hidden Blinker in Bag The flashing was hard to understand and I couldn't drive safely It was the right decision to buy this kid View detail
I feel good without the bag
It arrived 3 days earlier than scheduled It arrived 3 days earlier than scheduled The instructions were all in horizontal letters, but I was able to see the pictures and install it It took me about an hour to complete the installation of the Boomerang I think Hepco & Becker are well made and well organized without the Bag I just thought it would look better if the Nut-related material was black But if the material of Plating is Black, it will look even better I think View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
Although not quite what you'd expect
The YOUTUBE video shows how to install the One-touch seat in place of the Tandem seat It was introduced as if it could be done, but as for R1, it was Bolt tightening
I think it can't be helped because there is a Key lock in the seat itself, but I still have to do something I wanted it
Although there are some minor complaints about the included Seal material being cheap, the quality itself is unquestionable
The ability to add a space for a bag to the R1, which has no loading space, is still very attractive! It is
View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
Convenient Rack
Today's sports type motorbikes can be difficult to use a seat bag There is
It helps in such a situation
However, some manufacturers may not be able to get the fixed belts to fit, or the length may be too long It may require
Other than that, I have no real complaints, just not an affordable price, but it's convenient
View detail
Generally good
I thought that if I left the Holder on, it would be conspicuous and I would lose my Refreshing view I was
Thanks to the powder coating, it doesn't stand out and is quite good
However, it was a pity that the screws are the same color (silver color) as the screws It's a bit of a hassle, but I painted them
View detail
For those of you with gold
Visibility is certainly improved However, it is difficult to operate the keys because the adapter is located above the key cylinder Since the Mini Cowl is attached, it becomes even more difficult to operate, and eventually I had to remove it I thought the meter relocation kit from the store SIMPLE was better I think View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Generally, I'm satisfied
I bought it because I wanted a well and a handle around the seat
It comes in handy for getting in and out of the garage and for tying the luggage to the Seat
Quantity by widening the front slightly during installation:Set The positioning of the holes was just right
The front mounting is on Hexagon Socket plate Screw, BMW Most of RnineT's Screw
Because of the star-shaped Torx screw, there will be no unity But it can't be helped because it is a special screw
Cost should be a little cheaper, I think
View detail
It is hard to install
"I want Engine Guard to prepare for any chance, but I do not want to become a learning car ... .... "
When I thought I found it, I got it love at first sight and bought it!
"Small firmly feeling with swinging will surely protect you ....... "
If you say what to put on stand up in the second week!
Imagine awaiting and immediately wake up and check for scratches.
"Is that soil at the end of Handlebar ...?"
Apparently, it seemed that Handlebar and this Guard first contacted the ground and protected Tank, Engine, footpeg and others. Thanks! I will not beat it anymore! (Even if I kicked out about 20 times out of compression, it did not take Engine ... .... )
Function and appearance were satisfactory, but the installation was Large strange.
The Instruction Manual was German! Well as I expected.
Although there are few mounting parts, Bracket where Frame and Engine are fixed (I feel that it was a part like Curry 's Nan) Instead of tying this bodys together, this is a hard time.
There seems to be some distortion in the product, Quantity : Pair (for Left and Right) Do not match if the hole positions do not match.
The hole position was up and down 2 cm. Even though PenetratingBolt .......
With Driver, we shifted position and finally installed successfully! It took about 3 hours to complete!
Anyway, if you want a durable and Small Engine Guard! For those who like it is strongly recommended.
There is a feeling that the center of gravity changes slightly because it is quite heavy so there is attention!
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Urban G/S, BMW RnineT
I like Orthodox.
I do not want to have any luggage in my body as much as I can, but with tool loading and accommodation Touringetc. I want to do.
Carrier like breaking the design of Motorcycle has a bit of resistance, for those who.
This MODEL is an Orthodox PipeDesign and it makes a relatively clean impression.
By attaching Carrier, the feeling of RnineT's clarity is slightly lost, but I do not feel such a strong discomfort.
Tandem seat on Saddle Bagetc. When attached, the feeling of cramping was improved.
However, since the attached fixed Screw is a hexagonal Screw that looks somewhat cheesy, I wanted to stick to Torx.
Also, those who are planning to change Seat to something other than OEM may interfere, so be careful.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Comprehensive satisfaction
I bought it from anxiety about standing gobble etc.. Because it is Exclusive Design, of course it will be decided.
I made it to black, but I am surprisingly unconcerned with chic and I like it.
Compared to Cylinder Head Guard, it is roughly comparable, but it is good as we are winning in terms of protecting the Engine.
Installing by yourself Because Torque management of Screw was suspicious, I brought in with Dealer and brought in.
View detail
I can not use the Magnet method
The GSX-S 750 has an elaborate Tank shape, and my car is a Matte Black paint, so it's unnecessary to add an ordinary Magnet formula Bag. However, since this Tank Bag is a TanClock method that fixes and fixes the dedicated Bracket to the tank, there is no problem.
Design is good for Bag itself. However, because it does not block 100% inundation into the inside, all items are divided by Zip lock.
I had to attach Mounting Attachment to Bracket and I had to make a hole on the bottom of Bag by myself, but it was MinusPoint that made it a bit painful.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Is there peace of mind?
Frame has changed since the 17th year and Engine Mounting Bracket on Left has been added.
It is difficult to install by interfering with some products.
In the case of FlatTWIN it is a place to worry about whether it is Guard or Cover, but whichever you put it is Parenthesis so bad - - -
View detail
Defective item
Purchase Sissy bar & Mirror RackSet for REBEL. Below, the problem point.
1, the mountain of the Screw cut portion of Sissy bar is crushed and Bolt is not closed.
2, welding of Sissy bar is sloppy and it is a mountainous mountain and Mirror Rack can not be combined.
~ Anxious points ~
3. When installing on the car body "Did you measure?" I feel that each Bolt is under impossible force.
Although I tried to return it but returned goods are also troublesome so I forcibly attached it. Each work below.
1, I thought that only the beginning was crushed, so I pushed through forcibly using electric drill.
2, shaved with GoldFile.
3, Wait a minute.
I think Style is nice.. However, since the rack is small, I will think about how to put the Homsen box.
View detail