Reviews
It's easy to use
It is convenient that it can be temporarily fixed with the positioning of Wiring. View detail
Fits: その他 , YAMAHA MT-03 (2015-), YAMAHA MT-25
Convenient for wire lock
I bought it for my NSR80 to run Circuit.
When running a circuit, the wire lock is required to prevent the drain bolt and oil filler cap from loosening.
When fixing the wire at the time of wire lock, it is necessary to tie the wire somewhere, but it is convenient because it is possible to tie the wire to SMART by fastening this with the Bolt which is near the Drain bolt and Oil Filler Cap. Afterwards, if I get the fixed price lowered, or the price remains unchanged and it becomes 2 pieces, it is Large satisfaction.
View detail
Sufficient performance
The other company's product we used before was inexpensive, but lacked strength and accuracy, so we ended up losing money by buying cheap.
This product is not the cheapest by any means, but it is solidly strong and accurate.
I opened one bag and visually checked for defects, but everything was molded tightly and there was nothing that could be called defective.
The LEADTime is short and excellent for wear and tear.
I can recommend it
View detail
A bargain with lots of room!
This is the amount of Tie Band that comes in many cases, so you won't run out and can use it without hesitation. The price for this amount is very reasonable. View detail
Active in a variety of situations
It is very useful for a wide range of applications, mostly for bundling wiring, but it can also be used to lock the front tire on a motorcycle during maintenance. It's a good cosmetic product, and there is enough to go around. View detail
Thin but strong
Is it thinner and larger than I expected? But when I used it, it was surprisingly solid and never broke or tore off Mm
Often a poorly made Band will get hit by UV rays and become bruised and torn off I've been using it in a hot spot right next to the Engine for a year in the wild and have had no problems
Necessary and sufficient
View detail
The quality is not bad
I used to use cheap Tie Wrap, but it cured and broke in the cold and the heat ruined it quickly in the heat becomes
So I bought this product, which is a bit expensive for a Tie Wrap
I can feel it, it's an expensive one! The texture is good and solid It's a good Tie Wrap with a solid texture
This is a safe and secure way to bond together
It has been wired and bound from the outside for over a year, but there is no noticeable deterioration
View detail
Is it a little short?
I don't know what the standard length of Tie Wrap is, but at 150mm it seemed a bit short
The quality, etc., is perfectly fine and does not cut It's pretty solid
I have a repartition length, so when I run out I'll buy a longer Tie Wrap next
I felt that 150mm was not long enough for my usage (Hose installation around fork, etc.)
View detail
Cospar good
This is Large sturdy, though it was thinner than I expected
The strength is fine and I will use it more and more
I would like to buy something a little thicker
View detail
Tie Wrap
A very common Tie Wrap
It's not too bad, not too bad, very normal
However, you can order a single bottle, which is a great way to adjust the price of free shipping
View detail
You can use it in a moment
You can choose the thickness and the amount!
I think many people don't have much of a pin and wiring, but it's quite useful
Wiring of Oil drain
Grip Wiring
Exhaust System Wiring
Wiring of Caliper bolt
Wiring on boardCamera
etc., etc
This time, I would like to put the aluminum mesh on the Radiator core
But the Core lost, and Wiring wasn't really suitable for it, so we went to Tie Wrap Change (laughs)
DIZZY's Ear Cup is wire-covered in a container, so it is a very easy to use
If you open the lid and try to use it, it can all come out
So I use Drills to drill holes in the top of the lid so that I can get it out of there
A bit pricey, but the product itself is much better than the Home Center Needle Gold, so I recommend it It is
If you have Twister on the screen, you can easily do the wiring, so please give it a try! Please give me a copy
View detail
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
I want it attached to the Indicator
Sold separately for some reason
Maybe it's the Rubber quality of PMC's Indicator, but it's so lurid that it goes around and around when you put it on It is not easy to work with due to the need to install it This is because of the Indicator
View detail
Multitude Of Uses
I keep a few with me on the bike and come in very handy being reusable. They can be used as a simple locking device and as a replacement for the oem electical cable ties, which are of similar design. View detail
It stops tight and doesn't leak
What made you decide to buy? There are various sizes available and I bought it to fix the reservoir tank hose for my car (Big horn) Better value for money than OEM
How was your experience with it? It's too hard to spread out with your bare hands
Was it difficult to install? (In the case of hard parts) Using radio pliers is the right thing to do
What is the point or hang of installation (for hard parts)? Choose a Clamp that fits your Hose size
How does it feel when you wear it and what is your height, weight, etc. (in the case of Apparel)? Any
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer? None
[Do you have any products to compare it to? KIJIMA's Horse clamp, which can be extended by hand But it's expensive
[Others] Any
View detail
Easy to use.
Purchase for Cable tie around Handlebar. Easy to desorb, strong, easy to use. I think that we will replace the cohesive part that we used Magic tape in the future. View detail
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled)
I think that there is no particular problem, but ...
Since TMR 36 is used in Z1, PMC's Indicator and Quantity : Purchased for use with Set.
Since it was the same thing as originally attached, I selected it without hesitation, but this Band seemed to be no elastic from before, and there was something to say as it was distorted even a little.
So at the same time I purchased another OEM Parts Band and compared it and try installing it.
When comparing both products, there are no particular problems such as appearance, but from the difference in Material this product is still Spring elastic (?) It is weak, and I feel like it will be deformed against bending stress.
Yamaha's OEM Parts purchased at the same time returned like Spring even if grabbed by hand, and it seemed that winding was also good for Indicator.
So, this time I decided to divert OEM Parts without using this product.
Since it is perfect on the aspect of Cost, it is an honest impression that I wonder if you can review the material a little more.
View detail
I am hiding in Bag
Normal Tie Wrap disposable.
Since this is reusable, it is possible to use it for purposes other than the original use such as fixing Cable and other things, especially when Camping touring something Small thing also increases, so I make it lurk in Bag for just in case.
It is not an obstacle as well, so I think that it is good to keep it for emergency.
View detail
In Hemp palmk ‥
I reviewed Fuel Hose's handling, so I worried about fuel leakage along with that, so I bought this. I was tightening with in Hemp palmk before, but it is a bottleboarder .... Although the diameter was a bit small, but it ended successfully. View detail
Fits: その他 , YAMAHA MT-03 (2015-), YAMAHA MT-25
It is good for Wiring of Oil Filler Cap
To prevent falling off and to prevent mischief, we installed Oil Filler Cap for Wiring.
Large as well, Material : Stainless Steel so there is no worry of rusting.
Please follow the purchase of something.
View detail
The price is cheap!
Tie Wrap selling at Daiso etc. is uneasy so I bought one for Motorcycle.
I wish I could buy Hera Manta Iton or something. Attentive to COSPA.
We do not yet know about weather resistance and durability.
View detail