Reviews
having an effect
The GuardBody had been scraped to about half its thickness on the lower part, but there was no damage to the EngineBody thanks to the Guard being installed. View detail
To insure against standing over.
The installation was easy, but I did one bolt on each side and one bolt pc at a time, but the bolt still did not fit properly, so I had to raise the engine a little by using a spinner handlebar or something like that, using the lever principle.
A bit expensive, but for insurance.
View detail
good!
It was easy to install. View detail
It helped me right away.
The GSXR1000R 2022 was installed at the time of purchase of a new car, and the unfamiliar handling of the Separate handle caused it to fall over immediately upon delivery.
When back, STAND was caught by the foot and ba tan on the other side.
The Exhaust System and footpeg were scratched but Cowl, Mirror, Handlebar, etc. were intact.
I would give it 5 stars because it was suddenly useful (laughs).
Repair Parts is another good thing about this product.
View detail
Wing type Slider
It would look better if it were one size larger. View detail
in case of emergency
I like the fact that I don't have to drill holes in the cowl.
It seems that processing is necessary due to individual differences, but I was able to attach it without processing without any particular contact.
I'll have to beat it to see how effective it is, so I'll give it 4 stars!
View detail
I like it in Fashion
The engine slider with DownForce is a good idea, and there are two different designs. It is true that the stability seems to have increased. However, the Quantity:Pair (for Left and Right) I would like to see it sold as Repair in Single Body, and if Right is damaged, Quantity again.:Neck is the one I have to buy in Set. It's a good product, please. View detail
MORIWAKIEngineerRing is the quintessential MORIWAKIEngineerRing.
The quality was satisfactory at a slightly lower price than OEMAccessories.
We have not tried to determine the effectiveness of the system, as we will not know until we fall over.
View detail
I'd rather not use it if at all possible...
There is nothing wrong with not using it!
Many people say that racing sliders are conversely dangerous on public roads because they slide when they fall over.
View detail
Installed on Circuit Running
I installed it on a 2011 CBR1000RR.
We wanted to install the minimum amount of sliders necessary for circuit driving, so we installed these. The installation is done by tightening the bolt to the engine hanger bolt on both sides. When installing the slider, it is necessary to drill a hole with a hole saw or similar tool for the OEMSide cowl. The hole position was drilled according to the positioning paper included in the package, and then the hole was drilled by matching it with the actual bolt. Since I have not yet crashed, I do not know how well it will perform, but I think it will be very effective for slip downs and the like. On the other hand, I would not use it on public roads because the Damage may go to the Frame side if the Slider gets caught on a curb or something when it falls over. It takes a bit of time and effort to install, so if you are not confident about it, you should ask a motorcycle shop to do it for you.
View detail
Just in case
[How is it used?
From city driving to touring, in case of a fall
Was the one you received as per Image?
Street Image
Was the installation difficult?
No problems at all. Installed with ease.
How was your experience with it?
I don't want to test the effects.
[Included Parts:were they on?
Included Parts:None
View detail
Fits: KAWASAKI Z1, KAWASAKI Mk2, KAWASAKI GPZ1100F, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2, KAWASAKI GPZ1100F, KAWASAKI Mk2, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z2, KAWASAKI GPZ1100F, KAWASAKI Mk2, KAWASAKI Z1, KAWASAKI Z1-R, KAWASAKI Z1000J, KAWASAKI Z1000R
In case of emergency.
I had a little trouble getting the shaft through, but I was able to adjust the Engine position with Jack and managed to install it.
I would like to ride Motorcycle without forgetting to drive safely, although I feel safe with the Engine slider.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Anyway, Parenthesis is good.
I wanted a Slider using Carbon and bought it.
I am definitely satisfied!
It is easy to install, looks luxurious, and I recommend it.
View detail
Fits: HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F
Engine Case Slider for Honda CB500F 2015
A friends bike came in with some scuffs to the casing and not to get a new casing they decided they wanted to cover the small scuff with one of the R&G engine sliders. To be honest, You would not be able to see it once this is fitted. It also adds a little bit of protection to the CBF. I have used R&G many time for protection before and have had really good results even after them getting into some gravel. I found the correct part from R&G website and then searched Webike for the corresponding parts. Good fortune, Webike do have quite a lot of R&G items in stock. Added to my basket. This were part of a larger order as this also saves me money on the amount of shipping. I use now EMS fast as they have never let me down. From Japan to the UK takes 4-5 days total. This time around, most of the parts were already in Webike warehouse so they all arrived in 5 days. I do love the way Webike package their orders. They take great care in packaging well and keeping everything separate and individually packed. if there is any space, they fill that with extra padding like bubble wrap and/or air pockets. This was the case on this order. Although the box these came in was relatively small, they are already boxed in their own R&G packaging anyway. Webike packaged all the items thoroughly, thumbs up for that one. The case slider arrived in perfect 100% condition as you would expect. All the manufacturing from R&G is exceptional. They really do know how to make protection parts and make these to the highest specifications and quality. They do not take much to fit them, simply a couple of bolts and away you go. If for any reason, these do see the tarmac, I know they are going to do their job as intended. R&G, you are a superb brand and I am very pleased Webike stock your parts. Thank you Webike for the great service provided with this and all my other orders. View detail
if you don't mind protruding
It is much cheaper than foreign products, and I am grateful that they make these vehicles even though they are not available in large numbers.
You will need Torque, so you may have to spend extra on that, but while you're at it, why not use the Quantity:I prepared it with Set, myself.
The length of Bolt is a little bit complicated, so it is better to check it with Scale.
View detail
just in case
At a glance, it looks as if it were carved out of gold, but the entire body is made of low-wear hard resin, and only the logo plate is made of aluminum.
It is not a Type that covers the whole body like GBR, so it may not be able to protect you in a Large accident like a complete overturn.
I think it is sufficient for touring use.
It's about half the price.
View detail
Fits: YAMAHA Tracer 700, YAMAHA Tracer 700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA XSR700, YAMAHA MT-07, YAMAHA XSR700
Genuine R&G Aero Crash Protectors for Yamaha MT-07
There were a couple of other parts that I needed for my customers. One of the asked for good protection for their MT07 so I recommended R&G. I did look at other brands but for the price and what I have witnessed from R&G before, we went for these. The part numbers for the MT07 do only fit a couple of sub models but essentially the MT07. I got the correct part number from R&G anyway. The cost was reasonable so this was also a great benefit. The shipping courier I went for was EMS fast service. They delivery my orders within 5 days and I have never had it take any longer than that. From Japan to the UK, that's just brilliant. The shipping was also spread out over a few items which meant it was great value. Upon receipt of my order, the outer box was sealed with tape and nothing could escape during transit, not even the gaskets which are flat could be lost. All the item in the box were packed very well and bubble wrap was also added for additional security. Everything was 100% perfect. The material of these crash protectors I am not sure of but they really do scrub off the speed off if you have an accident. The aero shape is really retro looking which fits really nicely with the MT07 style. These Aero crash protectors are pretty easy to fit but just do one side at a time and get some support for the engine as when you remove each bolt, there is a small risk that the emgine will also move. Yes, I have mad ethis error myself so do not do the same. ALways take precautions beforehand. If you do not add some support to the engine and it does drop slightly, you will either never get the bolts to grip or you will just strip the threads and possibly mess up the female threads on the engine. Take your time and follow the instructions R&G provide. Saying that, they do not suggest supporting the engine but I always do now. One happy customer, thanks Webike. View detail
Slider
Installation was very easy. View detail
Fallen cannibals
This part protects the engine in case of a fall, and I think it looks good as a parenthesis. View detail
Fits: INDIAN MOTORCYCLE FTR 1200, INDIAN MOTORCYCLE FTR 1200S
Slider for IndianFTR
SliderBody is quite Large.
If it is this large, it may be effective in case of tipping over, but it doesn't look good. The bolt on the body is 18mm, and the normal wrench is 19mm after 17mm, so be careful. The included bolt is 10mm deep, so you need a longer hexagonal wrench. I think the price is too expensive...
View detail