Reviews
Is this an inferior Chinese product?
I've read in the previous article that the Right can be managed by shaving a little (I used Grinder even if I say a little), but the Left doesn't match up! The first time I went to the store, I was told that I had to buy a new one, and that I would have to pay for the new one. View detail
Fits: DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, APRILIA TUONO V4, APRILIA RS 660, APRILIA TUONO 660, APRILIA RSV4 APRC, APRILIA RSV4, APRILIA RSV4 FACTORY, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KTM 1290 SUPER DUKE R, KTM 890 DUKE R, MV AGUSTA BRUTALE 1000 RR, TRIUMPH SPEED TRIPLE 1200 RS, TRIUMPH SPEED TRIPLE 1200 RR, TRIUMPH STREET TRIPLE 765 RS, KAWASAKI ZX-10R, HONDA CBR1000RR-R SP, DUCATI 848, DUCATI 1098
8BL-sc82 sp, did not come with 22 year MODEL
The shape of the OEM brembo cap reverse side and the reverse side of this product are obviously different, so I could not put it on.
The cap does not drop to the OEM position due to the protrusion on the reverse side of this product interfering with the cap on the inner side of the Reserver tank.
View detail
Not what I expected.
[Color] I bought Clear, but it is actually translucent so that the Tank Pad is less noticeable. [Color] Clear would have been nice ….
It is PeLePera without thickness.
I had no choice but to paste it, but I wasn't satisfied with it, so I removed it immediately.
View detail
Fits: YAMAHA T-MAX 530, YAMAHA T-MAX 500, YAMAHA T-MAX 560
Rai TECBrake Lever Set
The bracket that the brake switch is pressed into did not fit, so I had to cut it off.
When not Braked Normal time. Brake switch cannot be pressed completely and ABSLamp remains lit and Cruise Control is also Quantitative.:It cannot be set and is scrap iron. It is no good.
After all, it has to be JAPAN….
View detail
For those who can be creative and ingenious
I purchased this product to install on a 2022 GSX-S1000.
The design is great, but...
As I said, it is different from domestic parts.
First of all, this product cannot be installed by itself; for JapanNumber, three Bolts longer than the supplied Bolt by 5mm or more were required.
There is a bracket for installing an OEMBlinker, but it could not be installed without expanding the mounting holes with a file. This is probably due to the fact that the holes are slightly smaller and the paint on the bracket makes the holes smaller. It is not enough to re-drill the holes by Drilletc.
The wiring of the License light is also short and cannot be connected without an extension. The wiring is so thin that a Crimper for Thin Wire was necessary.
The product itself has only four O-rings for mounting on the vehicle body, and the blinker cannot use the vibration-absorbing rubber of the OEMB blinker, but is directly attached to the vehicle. This structure probably cannot withstand long-term use.
I wanted the License light to be lineup as Repair Parts.
Because of the shortcomings listed above, I thought it was for those who can be creative.
View detail
Different sizes
I ordered an expensive Screw with a lot of trouble, waited a long time, and when it arrived, it was the wrong Size.
And you can tell an M8 from an M5 at first glance.
View detail
Fits: KAWASAKI ZX-25R, HONDA CB650R, HONDA CBR650R, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA X-ADV, KAWASAKI Z125, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z900, KAWASAKI Z1000, TRIUMPH STREET TRIPLE S 660, KAWASAKI NINJA 1000, DUCATI 848, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 939 SP, DUCATI MONSTER 821, DUCATI MONSTER 1100 EVO, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER 848
It doesn't follow!
This item does not come with it! I was disappointed! View detail
Oh! It was made in China, not Straight like the picture, but L-Type Type
There is a difference between the picture and the one that arrived.
I thought it was a RedRing Type with OEM brembo.
The one that arrived was made by Large land.
I ordered it because it's ItalianBrand, so I felt safe.
I received a different item from the picture.
It'll take a while, but something that's a few hundred dollars directly from Large land (lol)
If only it came with something as decent as Gasket's Washer...
I arranged and used it in a hurry for car inspection and maintenance, but I received something different from the normal picture.
It must be the return Level, right?
I will never touch a LighTech product again!
I don't understand why you chose the manufacturer's product for nothing.
View detail
Cannot be installed on S1000RR 20 years MODEL.
For the compatible MODEL in the product description "Year of S1000RR:19-21." I bought this product because it was listed as a "Brake and Clutch", but I can't install both (Brake and Clutch).
It is not a bad way to install, but the shape is not Match.
I would like to return it.
View detail
Lack of product description.
Even if you buy only this product, you can not install it to the car body.
You will need to purchase the Screw or broken Pin elsewhere.
View detail
of poor quality
In a word, it's a shoddy product.
The screw holes that are opened are gapped, so it can not even be installed on the car body.
I couldn't sell inferior products on Yahoo! Japan, and as a result, I had to pay tens of thousands to buy Garbage.
If you were considering buying one besides me, be warned.
View detail
Fits: TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS, TRIUMPH DAYTONA 765, TRIUMPH STREET TRIPLE 675, TRIUMPH STREET TRIPLE 675 R, TRIUMPH DAYTONA 675 R, TRIUMPH DAYTONA 675, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS
Pay attention to compatible car models
I bought it from the agency official Site, not Webike. But it is quite vicious, so I will post it here as well.
We made inquiries in advance and purchased the product after receiving a response from the representative that there was no problem.
I started from the Brake Side, but the Bracket of the Sensor did not fit. I couldn't install it...
So I sent a question to the distributor and moved on to the Shifter side.
I'm looking at the assembly drawing. "I guess I'll have to change my Shift rod... I was working on it while thinking what to do, but during the sub-assembly, I felt something wrong and discovered that it was physically impossible to install.
As expected, I put in an Objection to the agency, but the first reply was Just follow the assembly line and you'll be fine. Reply to the effect that.
I've also attached a picture of it ……
I finally got through to them on the phone and they told me that the product I ordered was discontinued and that they had sent me a new product after the Model Change. Of course I didn't agree to that.
And the conformity confirmation of the manufacturer side is not taken, and I'm going to borrow a vehicle from Triumph now to check the fit. I got a false information. Is it wrong to think in common sense of Japan even if it is through an agency...
It's also a Large thing to check if there's a precedent for your purchase.
The movement of the product itself is smooth and the processing is careful. It is a pity because I also liked the appearance.
View detail
How many pieces are in the box?
Body is Quantity:1 Set of 4pcs. but
This is a Quantity:1 Set of 2pcs. so you have to buy 2.
It would be nice to see it listed in the product Page.
View detail
Fits: HONDA CB1000R, HONDA CB125R, HONDA CBR1000RR, HONDA CB150R
There's no limit to how long it will take for it to come in.
When I ordered, I was waiting for a month. When the order was finally scheduled to arrive on the day it was supposed to, there was a notice of delay of more than 2 weeks in my order history without any notice. Please don't list products that you can't sell properly. View detail
Fits: YAMAHA MT-09, YAMAHA TRACER 900, YAMAHA XSR900, YAMAHA MT-09 TRACER
Pedal falls off while driving
Footpeg dropped while driving on Circuit.
I will die if I do not do it well..
No matter how much it is for Race.
Since I can not turn on the Brake switch, I have to buy a hydraulic switch.
View detail