Reviews
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Can be used with AC vehicles
To install LEDs in an AC car, you can use a Diode or Condenser to rectify or Replace the Regulated Rectifier & bull;Wiring process etc You have to go through the trouble of loading the Battery and so on
However, this product can be installed in AC vehicles as well It is not intense brightness, but it has sufficient brightness
The Tail is prone to run out of filament due to vibration, so the LED Bulb is very useful It is also well made, so I have a sense of security
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Response is good
I changed to direct current by processing APE's TailWiring, so I had to change to LED to balance the amount of power generation I did
Response is very good and I am happy with it
In the past Impressions, it was said to be dark, but I have been using DC, so I don't care much It wasn't even close to being a
When the direct sunlight hits the tail lens directly, the amount of light can't compare to the bulb type, but it's a good idea to use a light bulb Since the Rear carrier+Box is installed, it is almost in the shade, so the visibility is good Large Durable
The cost performance depends on how long the life expectancy of the product is I did
View detail
CostValue Good
? Off tail lamp is turned into LED by cutting off well on off-road
? Easy to install, light intensity is usually a little darker than the valve (About 20% reduction?) Is it acceptable?.
? It is a good choice whether to reduce the risk of ball depletion in off-road running, the gentleness to the battery with reduced power consumption.
View detail
dark
Tail lamp is bright but Stop lamp is too dark. You will not notice that you stepped on Brake. Three times the brightness of the Tail lamp is unlikely.
View detail
Price is high but goods are good
Because I can install both 6 Bolt car and 12 Bolt car, I bought it for Yamaha For-Gel 50 but VOGEL can not be used because it is an exchange, so I used it for Yamaha SEROW 225. View detail
tail lamp
kitaco tail lamp It's a 2 incandescent bulb. for the tail light The light that came out was very bright red. Make driving safe and beautiful. The Kitaco end lamp is a 2-filling light bulb for a very clear light. This makes driving safe and beautiful. Translated by Microsoft Translator View detail
Amount of light attached to the GSR 250 ○ Brightness at normal time and braking ○
When I pulled the Brake lever with IgnitionOn, the brake light glows and at the same time Flicker was interested in the LED of the Front's LED. Although it is the one electric bulb, although I looked for LED Lamp at the Motorcycle shop because of the high power, many that will cost 4000 or more Many LED Lamp 1 pc. I thought that 4000 yen is unnecessary, and when I search by webike it was ODAX's LED Lamp that I did Hit.
I do not hear Manufacturer and the real thing (Exhibition) I was worried because I could not see it, but the quality of the product, the brightness after installation has no problem, the price was also cheap so it is a satisfying product.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Should be used with direct current
This Valve is made to use only with direct current 12 V. However, the AC power supply also turns on, and in that case the brightness will be about half. I tried comparing both. Even with Battery-equipped cars, there are quite a few cars that only Headlight and Tail light are interchangeable. The vale's dark reputation seems to have a cause here.
However, I wonder if there is a brightness of 20 WattClass .... 10 of XR 100 MOTARD / Compared to the 5w ball, it feels the same or somewhat bright. Well, it is necessary enough..
When converting the AC power supply to DC, rectify with the Condenser on the rectification, use the Tester and make sure that 12 V is coming out and use it. It is troublesome but it makes me happy.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Care must be taken for diversion
I chose ZEPHYR χ out of conformity by Socket shape and Watt number but it did not attach.
Because the LED part is long, it interferes with the OEM reflector.
There was no choice but to spare it, so I installed it in the SOLO issue with KIJIMATail
I can use it without problems.
About the performance is unnecessary and impossible, but it is brighter than the cheap Ny Hao Parts still on.
View detail
Fits: その他
It's expensive but good..
Although I was attaching a cheap LED to the Stop lamp, it became useless in about 2 months, I made a lot of trouble deciding. Even if it is cheap, after all, since there is a case that will lose the purchase of cheap buyers, in any case it is safe to ride a Motorcycle hanging gold it is multiplied, otherwise it is an item I tried to save. I wish I had purchased this from the beginning. License Plate Light It will illuminate, and the Stop lamp is also bright, and consumption current is also small, so I am very satisfied. View detail
Fits: その他
I think it's pretty good
LED Tail Bulb also has a white color for License Plate Light, but this is a light bulb color
There is no discomfort even with the old car.
Greed might be better if there are more LED elements.
View detail
Fits: その他
More than SP ○ ○ - - -
It depends on the type of car you use, but it is obviously darker than the Normal valve when you attach the LED Bulb made of SP 0 to the KLX 250 on which I am on. I felt the danger and returned it to Normal valve. (Although there is no problem with VTR 250 - - )
M & H pine Stripe made domestically safe and sometimes referred to as a well-established Manufacturer, but I tried to buy it although it costs a little. It's brighter and more secure than at least SP 0.
View detail
Fits: その他
Performance as expected
If it is 250ccSingle, repeating CHOINORI will worry about insufficient charge of Battery so I bought it for countermeasures, installation is simple with a pon attachment, the feeling I saw such as brightness and lighting is good with a natural feeling that does not consciously consider LEDs much. View detail
Durable
The Tail light bulb that I had attached so far has broken part of Glass from the gold tool due to vibration.
Although it is used at the time of exchange, the price is also cheap so far it is durable and it will not come off.
I always prepare Spare, but I'm glad I'm going to last long.
View detail
I do not have ChicaChica and I do not eat electricity.
Although it is to be said that, anyone can easily exchange.
When Idling, unstable brightness like OEM goes up and down and the brightness is more than enough.
From now on, it is LED.
View detail
Fits: その他
Used in MONKEY
At the time of putting this, LED Bulb did not come out from Mukawa yet, but I bought this Valve from the reliability that OEM has adopted although the price is high. At the moment, LED is high performance at a low price, but at the time it was still high only with high performance, it was a fragile image, but this Valve has actually been used for 6 years, it is absolutely no Trouble. Excellent illuminance. You can run with confidence without having to dig your bear at night. Recently the same Valve was issued in Mukawa. What is the price "Half price" Although I regret a bit for the reason that I am a little regretted, those who are considering introduction from now on may be better, but since I have demonstrated the performance that it is not broken at all for 6 years, double price Although it issued, was not it sufficient that the original price was taken?
It is a product not ashamed of the name of M & H.
View detail
Brightness is also reasonable
I installed it in the outside Lucas tail lamp. I was worried about the amount of light, but with normal Tail Bulb etc.. It is bright above that.
The difference between Position and Stop is clearly understood.
Durability will be used in the future, I think that this price is a good item.
View detail
Required brightness and power saving
Purchased for 6 VDAX Tail lamp with unstable power generation. Headlight got brighter on the surface after replacing ♪ The making itself is a bit sloppy, but it is not a problem in function. It's easy to install just replace the existing Lamp. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Attached to CUB90DX
Changed to L ★ E ★ D ★, because the tail light has run out.
bright. Beautiful. can not cut.
It's a nice feeling though the trio rhythm of all of it is done as it is!
I will change all of them to L ★ E ★ D ★ once Gold gets more.
View detail
Fits: HARLEY-DAVIDSON Universal
I used it for Tail lamp!
It is Tail lamp bulb of SR 400 which was considering exchanging to LED Bulb because it is frequently cut by vibration, but I want to finish as cheaply as possible this time... I chose cheap Valve (= '∀ `) Man ('∀ `=)
When opening it and installing it, it was a point that I was a little worried that there was a backlash in the installation whether I did not make the ground surface with Valve 's Socket so well, but also for the inspection of the vehicle It was bright enough to respond. (Well, I guess that's because the price is also a price so it looks like OEMValve does not stabilize when it is lit a little dark)
The shape of the sphere or Valve, the width of the Valve is not different from the general Manufacturer's Valve and Large, and the backlash when attached to the Bulb Socket seems to be due to the ground plane of the Socket (-;)
Although it is a Review when running, I was taught to the person who was running behind, but in the state it was attached, the Tail lamp will not stick to or stick with vibration of high rotation specific to SR 400 It seems there was (-_-;)
I tried to polish up the ground plane with a Water-resistance Paper which I purchased at Home center, but for now, for the time being, I started to lit without problems even at high rotation (^_^)
Several months have passed since installation, but at the moment there is no conspicuous problem with both light intensity and backlights, is not it a long-running one for the price? (^o^) /
Although it is currently used only for SR 400, I think that Valve will be introduced to the VT 250 F which is quite old and it is unstable to light up in the near future and I will purchase it as a spare (((O (* ゜ ▽ ゜ *) o)))
Not only for preparations for emergencies but also for daily commuters. It is a very recommendable item to be purchased also for use as Valve for insurance for Long touring or lighting test.
View detail