Reviews
For Grom
I bought it to adjust the Tappet of Grom
When I opened it, it was slimy with oil?
I could use it without any problem, but the screw of the shaft was loose and it was going to be RoseRose You have to be careful
View detail
Necessary and inexpensive
CROSSCUB110 (JA45) It is used for the Spark plug replacement of the
Nothing noteworthy, but I like that it's cheap
This and the Ratchet Handlebar are all you need for your tools
Torque wrench is even better if you have a Torque wrench, but the angle of the tightening on the official website of Plug You should be fine if you check the
Even a zubby amateur (like me) can replace it
View detail
It's cheap!
It is used for Tappet clearance of GORILLAetc.4CycleEngine and I have
The price is low enough to save me a lot of money because I can't use it to measure Clearance because it gets worn out gradually
The gauge is made of a large size, but the gauge is made of a fixed metal clasp GORILLA, it's hard to use for MONKEY, so Size is stamped on it, too, so I'm going to have to make a stop If I remove it and set it to RoseRose, I can use it by shifting the position 4 or 5 times I am!
View detail
JETECH TOOL Thickness Gauge
The item is very good! I did not regret what I bought. Many sizes to choose from. Made with very good stuff! Checked the gaps, everything correctly shows. I recommend this product !!! View detail
useless for the price
I was worried because it was cheap, but I received something that was rather solid
To clean the Brake Caliper, you have to push the Piston back in, but not by hand Impossible
I can do this one
But it's hard to screw in It's hard!
Well, but it's like this
View detail
It's handy for pad replacement
When changing the brake pads, you can use the pliers on the four-wheeled Large Caliper with some creativity The piston was pushed in, but it is difficult to work on the small for motorcycles I bought it because
When the item arrives and you open the box, is it used? I think it's a bit of a scratch Well, I don't mind it because it is a tool
Because Lever is heavy and hard to turn as it is, after applying Grease to the moving parts, the work is done I worked on it and I managed to do the work
I think it's useful for those who often use cars and motorcycles in relation to Brake
View detail
The grip is comfortable
It's easy to use and fits in the palm of your hand The price is also affordable and the cost performance is good Because it is a driver of the size that goes into the palm of the hand, it is said that it is a driver that is very useful in a narrow place I think View detail
To the Grom Engine!
The circumstances that led to the purchase of a Takegawa Sports Camshaft when it was installed and adjusted I bought Tappet Adjust together with Tappet Adjust to use it This is a gap adjustment using the Wrench Set The product consists of 32 Thickness Gages Uncalibrated adjustment values are selected from the 32 Thickness Gages and added together (e.g. 0.17 Adjustment 0.15+0.02 Thickness Gauge) View detail
Good and inexpensive Plug wrench
I'm a mechanic and only use it occasionally, but it's something I need to have, so I bought it
I am very happy with the quality of the product, which is cheaper than at home centers and auto parts stores
I would also buy another Size
View detail
Good screwdriver
I was actually very pleased the first time I used them, (as opposed to just a standard straight-slot screwdriver). They held very well, and I was able to EASILY and properly tighten the connections in the circuit breaker panel. But, my biggest surprise came when I was trying to LOOSEN a factory installed screw that was installed a bit too tightly. Just couldn't get a good 'bite' with the straight-slot screwdriver. This was true regardless of the fact that the screw had a combination head for straight slot or square. The square drive fit PERFECTLY, and immediately loosened the screw. View detail
Tappet adjustment, PlugGap adjustment - - - For each place adjustment
Purchased for SR 400's Tappet adjustment.
Also I used it before because I had rust and bending.
The deciding factor of purchase is the number of sheets and price!
At this price this number is not quite enough.
But - - I do not use it w
In addition, since it can be used for adjustment of PlugGap and measurement of various parts of Engine at Overhaul
Would it be better to have more sheets - -
At the time of opening, the root fasteners were loose and it was nearly RoseRose.
There is no problem when tightening again.
View detail
good
It is cheap and has high Cost performance. 1pc. If there is one it is an organism. I think that it will not be damaged by buying it. Tappet adjustment etc etc. I tried to use it for purchase. There were 23 peas, even if the car type changed, I bought it without any problem and I thought it would work. View detail
Tapered shape is Good
Motorcycle's Tappet is in the back, and the usual rectangular Thickness Gauge is hard to use. This product is superior to that point. However, it was somewhat disappointing that the thicker thing is slightly out of the Size range I would like to use. (I felt that I wanted Shift to a slightly thinner side. ) Naturally, it is essential to choose a Set whose thickness you want to use is covered beautifully. View detail
Strong, long-lasting making
Simple, making is steady. It is heavy because it is sturdy, but I think that it is a product that you can use for a long time. I think that it can be used not only for two wheels but also for four wheels. View detail
It is a price. First of all,.
It's expensive, but it's totally better than nothing. It was good.. No problem at all if it is the first tool. You can relax easily. View detail
It is tough and long-lasting
I tried it immediately, but it is a simple making, and it is a sturdy feeling. Of course Piston pushed back firmly. I assumed it from the beginning, but when you remove Caliper, it is a good idea to prepare a little table so that Caliper will not be dangling with Brake hose and put it there. (When you do not remove Brake hose) I think that it is not a frequently used tool, but I think that if you have one, I think that it can be used for a long time, so I decided to use Cospa as Point. View detail
Large rinse
I bought it for car use Large rinse than I had thought.
Usability is not bad, so it is bulky, but I will put it in the Tool bag.
It is firmly made for the price. It is a tool that can be Recommendation if you do not mind Large
View detail
To return Caliper's Piston.
【What made you decide the purchase?】 Required
To return the Caliper piston at cleaning.
Previously, I was returning by hand, but since Piston was accidentally disconnected.
Cheap Prices.
【How was it actually used?】 Required
Just put it in Simple and rotate it. it's simple.
However, it is somewhat heavy and needs attention. With this you will not lose Piston w
[Is there anything I was disappointed about?] Required
heavy. Big.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Perhaps it is for 4 wheels, but I would appreciate it if you could put out items for two wheels.
【Have you compared items?】 Required
There are no products used for comparison.
[Others] Any
Be careful not to drop it as it is heavy as above. It will hurt injuries and Motorcycle. It would be nice to put it on a small table or the like.
View detail
Is beautiful
Easy to use and easy to hold,
I think that even this price is made precisely.
I am useful in regular maintenance.
I also have to arrange the other Size little by little!
View detail
It is a required tool
I bought it to make Valve clearance adjustment
It's easy to use because it is set finely
While paying attention not to rust, I would like to use it for the Large thing
View detail