Reviews
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250 ES, KAWASAKI KLX250 SR, KAWASAKI KLX250, KAWASAKI KLX250 SR, KAWASAKI KLX250
Installed on a 2005 D Tracker
[How is it used?
Model used:2005 D Tracker (After regulation)
Driving applications:Motard race, Dirt, Circuit driving
Duration of use:About 4 years or so
Intake:OEMcarburetor→FCR Carburetor Body-MXΦ37, KLX250SRAir cleanerBox + external air cleaner, AICut
Exhaust:KFACTORYMid pipe+KX-FSilencer
Ignition system:KLX250SRIgniter, Utani Coil
Replacement from OEM.
Used for about 4 years and replaced with FMFPower bombs.
Was the one you received as per Image?
As shown in Image. Clearly, the bore diameter is larger than the OEM and the exhaust efficiency seems to increase.
Was the installation difficult?
Installation is not difficult, just remove the OEM exhaust pipe and install a new gasket.
It is even better to have a precision tool and raspene ready to prevent lapping the FlangeMounting Bolt when removing the OEMExhaust pipe.
When installing FCR Carburetor Body-MXΦ37etc.FCR Carburetor BodyLarge body carburetor, it is necessary to recess the exhaust pipe as shown in the photo because the acceleration pump diaphragm part interferes with the carburetor.
KFACTORY's mid pipe was installed without any problems.
How was your experience with it?
The exhaust efficiency is definitely better than the OEM, and the driving performance is much better.
The above is a natural result because the exhaust pipes are larger than the OEM exhaust pipes that are often used before the D Tracker regulations.
We tried several Silencers, but the best combination was the KX-F Silencer.
In the middle of using the carburetor, we replaced the OEM carburetor with FCR Carburetor Body-MXΦ37, and the compatibility was good and the performance was further improved.
After about 4 years of use, when the KX -FSilencer was damaged, we replaced it with FMF's Power Bomb + Q4Silencer, but this product's running performance was only slightly inferior. (I felt that FMF had better driving performance.)
I remember that it was a good exhaust pipe that was easy to remove burns.
FMF Power Bombs (For KLX250R) The caliber was about the same when compared to the
We assume that this product + KX-F's Silencer can also achieve a considerable performance boost.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[ITEMS TO BUY TOGETHER
Gasket
Outside Silencer
Raspene
Precision tools
Clamp to stop exhaust pipe and silencer
View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22), HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22)
Best
This is a combination of RSV2Silencer and FCR Carburetor Body35.
After jetting, I went for a test run.
I'm dropping FSprocket2T, but when I'm on Asphalt, I get PowerWilly with Axel on from 2nd gear embed.
The welds are beautiful, and the fit of the joints is tight and excellent.
Beautiful 2-in-1 forward X-tube.
View detail
It's easy as it is.
Recently, the sound has become loud and dirty, so I replaced it
I have run about 17000km from the new Exhaust System.
When I opened it up, there was only about 1/3 of the Glass Wool left.
The replacement is Glass Wool as it is in the form of Exhaust System.
It's easy to do, just pull the old one out and put the new one on.
After the replacement, Idling doesn't feel much of a change in sound, but
The sound when accelerating has become quiet and has a nice huggable sound.
I think this is a part that needs to be replaced periodically.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X
Sound and performance, perfect.
I installed it in dTraX. Since the diameter of FMF Q4 is the same, you can install the exhaust pipe if it is a little wider than NORMAL. Intermediate Gasket can not be used, but with liquid Gasket, I think there is no problem. High RPM, but I feel the power torque has gone up. The lower torque I do not feel that the ride became difficult. In my case BEETInjector and NORMALAir cleaner inhalation up. The sound is different with Silencer, but the combination of FMF is a feeling which became slightly larger than the Normal exhaust pipe. View detail
Fits: YAMAHA XT250X, YAMAHA serow250 [serow]., YAMAHA XG250 TRICKER [Tricker].
No RSV issues, as expected
19’ I installed it in DG31J
Bolt position and exhaust pipeClamp were easily installed
The sound was not bombastic, but with a good amount of bass (As desired.)
Compared to the NORMAL, it is now easier to run because the drainage is better
View detail
Good quality item
Rsv badge is in good quality. But it seems quite different with the original rsv2 series badge. But its in good shape and looking is good View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22), HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22)
Cospa is good
We replaced it for carburetor for ME 06, and buy it because bimbin is too low at OEM exterior. Result, Large Correct Answer. Because Silencer is also rsv, is it also compatible with it? The caliber becomes thick and extremely low speed is easy to handle. Although it has the effect of carburetor exchange, it will go up to Beauty. By the way, Inner baffle pulled out. The finish is also beautiful at this price, easy to install (If you have some experience) is. View detail
Fits: HONDA XLR250 Baja, HONDA XLR250 R, HONDA XLR250 Baja, HONDA XLR250 R
light
The texture and sound became the sound that I liked that a little bass worked.
Since the previous OEMExhaust System was rusted and the exhaust leaked, it replaced it. So the sound's LargeSmall is unknown.
We also exchange Manifold, but we needed a little adjustment at the joint.
View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22), HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22)
Large Are you satisfied?
The accuracy of welding and joints does not leak even if there is no liquid Gasket, it was used as insurance.
I do not understand because the impression of the embarkation is exchanged at the same time as the Exhaust System. It seems that the stability of low speed has increased?
View detail
Fits: KAWASAKI SUPERSHERPA [Super Sherpa].
Maintenance property - Designality - Sound quality is Number one
Since it was installed from the time of second-hand purchase of the vehicle, I will review it.
OEMSilencer (After regulation) Compared to the low Torque Torque will be missing, there is no problem with KL 250 Sherpa's SUPER Low 1st gear start.
Obviously the RSV tube has better dandruff, the high rotation is easy Level.
Because KL 250 Sherpa has no Number Plate in Side cover, the intermediate Pipe to Silencer is slender, Silencer extends according to the angle of Seat I think that this product is the most visible.
Also, the point that you can easily feel OH with Hex wrench is also very GOOD for Sunday DIY man.
It is regrettable that simply stopping Silencer and intermediate Pipe with Clamp is certainly the point that exhaust leakage occurs. Pipe gets dirty due to leakage, so those who are concerned are liquid Gas essential.
Well, if it is 30,000 yen, I thought that it was an Exhaust System which I bought and bought for a change in purpose etc..
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
Purchased by appearance and weight saving
I attached it to DJEBEL 250 xc.
I installed the Exhaust System for the first time, but I could install it without difficulty.
As for volume, I felt somewhat quiet than NORMAL when Idling but it turned out to be a suitable volume as soon as I opened it.
The sound quality is a light feeling like Tapa Papa, but it's crisp well and I personally like it.
It became somewhat lightweight as it looks better, so I am satisfied with Large.
View detail
RSV Suko! By uncle
With this pumping system, it does not run much, and the sound is also shabby
However, from the attached Inner silencer, instead of the optional RSV Competition inner silencer, further cut the Punching mesh attached to the entrance to that Inner silencer to make it straight, the Torque also gets better and the sound gets a bit thicker and runs well It is!
By the way, I feel that Front pipe is not compatible with SP Tadao PowerBox.
I am not convinced, I cut off the Box which is the sale of SP Tadao, asked for the vacant hole to be closed by welding, it is combined with RSV Silencer as a straight pipe which is just bigger than OEMPipe!
Air cleaner Box If processing and combustion are also tightly tight, the merit of RSV Silencer can be fully tasted!
Very good Exhaust System!
View detail
Fits: HONDA XLR250 Baja, HONDA XLR250 R, HONDA XLR250 Baja, HONDA XLR250 R
Hey all! I have a 4 Stroke RSV Silencer Series III on my Honda XLR Baja. It works great and I really like the sound it makes! It came without the mid gasket (picture). I had to improvise, but I am still not satisfied. Where can I buy the origi
Hey all! I have a 4 Stroke RSV Silencer Series III on my Honda XLR Baja. It works great and I really like the sound it makes! It came without the mid gasket (picture). I had to improvise, but I am still not satisfied. Where can I buy the original mid gasket for the RSV Silencer Series III ? Thanks! View detail
Fits: HONDA XR250, HONDA XR250, HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22), HONDA XR250 (S-XR) BAJA (MD30), HONDA XR250 R ME08, HONDA XR250 R ME06, HONDA XLR250 R, HONDA XLR250 BAJA (MD22)
Exhaust pipe RSV
Color of the connection with Silencer was a bit insufficient, but processing Aluminum board, making connection, Complete connection, Align balance with Air cleaner, Silencer also adjusted slightly, No exhaust leakage Large change satisfied , I think the medium and low speed Torque became thick. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Silencer suitable for use
Trying to replace WR250R Silencer
I was considering it for a long time
Many people were wearing FMF
I was also considering with FMF
There is a vehicle wearing in some places
If you let me hear exhaust sound
Rejected because bass was too strong.
And I am concerned about welding details (Flowstone United States w)
Finally got a candidate
Leo Vinci and RSV.
But Leo Vinci is surprisingly heavy
And Silencer fixing is Carbon band.
I am mainly using forest roads
If the tide falls and the Band breaks.....
So we decided to last RSV!
By the way, because Barrel 4 was small in capacity, it was not listed as a candidate.
First of all, making is very good.
Fossil FOR JAPAN MODEL production. Welding well integrated.
Easy to install without any hardships.
There is nothing like common Bolt hole misalignment.
And the weight is about half! Very light.
After attaching and checking each part
Small exhaust leakage from Silencer port.
Rose once, apply liquid Gasket.
This alone eliminates leakage.
If exhaust sound is included SilentInner
Very crispy "Papa papa papa pa!"
The exhaust sound. When the bass is on board
Because my ears are so strange, it sounds just like the ideal.
It became a sound like a single cylinder.
Although high revs think that elongation is bad at this Baffle
Because I am emphasizing low and medium speed
This use is enough.
Incidentally
As SilentInner exhaust leakage occurred
Once removed and also apply liquid Gasket there.
As soon as you remove it, set the hole of Punching mesh attached to Baffle to φ1. 8 to 2. Expanding to 4 Large.
Bolt fixing the end peace also
Because the stainless bolt that comes with it causes grinding
To prevent galling
Apply Grease to Posipo Aluminum Bolt
attachment.
The sound improved a little and it got so much better.
Animals at the forest road and
To hunters with pest control
It seems to be noticed as soon as possible.
Anyway making is very beautiful.
I decided to purchase another
It's easy to purchase Repair Parts.
Because I heard that other Manufacturer is various troublesome feeling.
If you think you can use it for a long time
I think I did a very good shopping.
View detail
They are goods indispensable to Chamber attachment of their own car. there is no production stop -- please come out. If there is nothing since it is consumable goods, it will be troubled dramatically. collect and stock -- it is -
They are goods indispensable to Chamber attachment of their own car.
there is no
production stop -- please come out.
If there is nothing since it is
consumable goods, it will be troubled dramatically.
collect and stock -- it is -- ~.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250 ES, KAWASAKI KLX250 SR, KAWASAKI KLX250, KAWASAKI KLX250 SR, KAWASAKI KLX250
The first stage type of KLX250SR was equipped. Compared with the exhaust pipe of normal, an inside diameter is clearly large and exhaust efficiency improves. I think whether unite with setting reexamination of a carburetor or to be easy to become.
The first stage type of KLX250SR was equipped.
Compared with the exhaust pipe of normal, an inside diameter is clearly large and exhaust efficiency improves.
I think whether unite with setting reexamination of a carburetor or to be easy to become.
Although the remains of welding in the case of fabrication are also beautiful and appearance is carried out, if it uses for a while, a stainless glow will be carried out and it will become somewhat dirty.
View detail