Reviews
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
CT110 HUNTER CUB CT125
This Exhaust System and
Slide carrierEVOSlim/Side bagBracketBoth SIDE
Camping touring load up by equipment
Improved running stability when loaded
Changed from Mukawa Exhaust System to Hon Exhaust System
Low to mid speed TorqueUP
When touring in town
Decrease in frequency of turning to high RPM
It is a recommended Exhaust System?.
View detail
Can be installed at the same time as the down tube.
Steering Damper for CT125 (Made by KOKEN) to Down tube (Made by OverRACING) and installed at the same time.
However, it is difficult with Oil cooler.
It can be installed, though not in the way recommended by Manufacturer.
I enjoy running Curve!
Handlebar wobble is reduced, and you can experience the illusion of increased draughtsmanship. (^^)
View detail
Riding position is now easier.
The most important thing for me was that the handlebar was too far away from my arms and elbows, the basic upper body strength, so I could not ride as I wanted. This product allows you to position up without changing the cable attached to the handlebar. The installation was easy and there are no problems with the quality or price. When I actually drove the car, I found that just a 14mm increase in position made the Riding position much easier. View detail
Tank cap is gorgeous (laughs)
[How is it used?
Easier to open and close the cap when changing gasolines
Was the one you received as per Image?
It was exactly what I expected.
Was the installation difficult?
Yes, the first time I installed it, I had a hard time getting it to work, but I didn't have the LWrench that came with it and couldn't tighten it down.
We managed to get a Wrench that fit and it worked.
[How was it when you used it?
It looks better and is easier to open and close when refueling.
[Included Parts:were they on?
LWrench was not available, so you need to prepare it.
[Was there anything that disappointed you?
I wish it came with LWrench.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Preferably with LWrench included!
View detail
EVA TECDisk kit
For now, I purchased just the Front. I think the product is well made and the Brakes work very differently.
Next, I would like to purchase the Ryabrake DiscKit.
View detail
Japan's Manufacturer
Before the replacement, we were using a "Seven Speed" 258mm disc from a manufacturer in Thailand, but since it came from a manufacturer in Japan, we decided to replace it with a 258mm disc.
The number of flooring pins has been increased from 6 to 10, and the disc width is wider, so the rigidity has been increased, which I could confirm by gripping it harder after running about 100 km and finishing the narashi!
Control is also improved, and I was surprised to see how different it is even though it is the same diameter! I was surprised.
Large satisfactory product.
View detail
![[For P4-40RB Caliper] Brake Pad Spring](https://img.webike-cdn.net/catalogue/images/116672/674804448_TS.jpg)
It's quiet now.
The first bremboOEMPad spring I bought (item no. 120.4196.85) did not fit my P4-40RB CNCBrake Caliper, so I bought a new one. View detail
Control performance also improved
By increasing the diameter of the rear brake to a larger diameter, braking power as well as controllability has been improved.
We hope you will find the installation video on YouTube for your reference.
However, there are some bolts that need to be replaced, and Torque management is required, so if you want to do the work yourself, you will need to have a good understanding of the installation process.
We chose Gold this time, and I think the design looks great.
View detail
Braking power increased.
By changing the diameter of the front brake to a larger diameter, the driver can now feel more braking power.
As for the installation, there are some bolts that need to be replaced and Torque management is required, so if you are going to do the work yourself, you will need to have a good knowledge of the installation process.
We chose Gold this time, and I think the design looks great.
View detail
One point on your feet.
Dress-up your feet.
The CBR250RR's stand is a little uncomfortable, so we installed it to increase its stability.
Installation is easy and quick, just tighten with a Hexagonal Wrench.
Choose the color of your choice and your feet will shine with one point.
View detail
Position Improvement
Improve Position somewhat.
Also, the difficulty of viewing OEMMirror has been improved.
Instruction Manual is not included. Please read the QR code and watch the installation video on YouTube.
I don't think there are any nowadays, but if you don't have a smart phone, beware.
View detail