Reviews
Fits: KAWASAKI KX450
Purchase recommended while parts are available.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fits: KAWASAKI KX450
As expected of an OEM product, the precision is perfect.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fits: KAWASAKI KX450
Buy while you can get it.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fit for the face of Japan!
I bought it thinking that it would be too large and not fit at all unless I used a short MaskHook or something, but it was a USKawasaki mask. (Because the AVIREX Mask I bought before was too huge Large and left it behind). The Mask that came in a large size is just the right size and fits me softly and comfortably. However, it is a little thicker, so it may be hot in the coming season. Personally, I liked the one with Kawasaki's logo all over it. I liked it. As for the question that your face is too Large, I just want to say that Mask, a certain RACING Miku, says that M Size is the right size for him. View detail
Fits: KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 1000 LT, KAWASAKI VERSYS 1000 LT, KAWASAKI VERSYS 1000 ABS, KAWASAKI VERSYS 1000 LT, KAWASAKI VERSYS 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI VERSYS 650 LT, KAWASAKI VERSYS 650 LT, KAWASAKI VERSYS 650 LT, KAWASAKI NINJA 1000 ABS, KAWASAKI VERSYS 1000 LT 18
Convenient on the road
With this, you can load all your stuff together and fit it in the Pannier case. View detail
Kawasaki T-shirt
My mount is a Kawasaki 2019 W800 retro motorcycle, so when choosing equipment, I usually choose the type suitable for retro cars. The webike website is a good choice. This T-shirt is very suitable for retro style. The chest pattern is hertitage A7R. The material is very soft. The delivery speed is also very fast, a very good shopping experience. ---------------------------------------------- My horse is a section of the 2019 Kawasaki W800 retro motorcycle, so when the choice of equipment usually choose the type of retro cars. webike site is a good choice. This T-shirt is perfect for retro style. Chest pattern is hertitage A7R. Material is very soft . Delivery speed is also very fast, very good time shopping experience. Powered by Google Translator View detail
Vintage knight t-shirt
kawasaki 1969 heritage mach图案的t恤衫，非常的适合骑士日常生活中穿着。版型还不错，比较的收身一些。材质不是纯棉的，感觉像是混合材料，还是比较柔软的穿着还是比较舒服。个人觉得比较适合川崎车主尤其是复古系列的车主，比如w800和z900RS。 ---------------------------------------------- t-shirts kawasaki 1969 heritage mach pattern, very suitable for everyday wear knight. The version is not bad, compared to close some of the body. The material is not cotton, feels like mixed material, it is quite soft quite comfortable to wear. Personally I think is more suitable for Kawasaki owners, especially owners of vintage series, such as w800 and z900RS. Powered by Google Translator View detail
Fits: KAWASAKI Vulcan S, KAWASAKI Vulcan S ABS, KAWASAKI Vulcan S, KAWASAKI Vulcan S ABS SE, KAWASAKI Vulcan S ABS
The fit feeling is great and the fashion level is up!
What made you decide to buy?
KawasakiVULCAN400SExclusive Design
How was your experience with it?
Very good
Was the installation difficult?
It's easy
Remove the Rear Sets and replace it with the Plate with Velcro and install the attached D Ring to the Rear Fender.
After placing the SoftTop case on the case, simply pass the Belt through the D Ring on the Both Sides to complete the process.
[Others]
When I removed it, I was a little disappointed that it was only the top handle. It would have been nice if there was a D Ring or Hook at the top and bottom to attach a strap for the shoulder strap.
The SIDE is a little weak and will lose some shape if you continue to use it. I added a reinforcement board inside.
It's a little bit more than that, but it's large enough to fit in instead of a saddle bag, and you can do a day or two of touring with it.
View detail
Very good product! But a little caution is required
There is no problem with the quality of the product as it is made by the famous hat brand NEW ERA Large grain size for imports I personally didn't get that impression from the description However, there are a few things to keep in mind when purchasing
First of all, the color of the logo on the Left Side side of the NEW ERA is green as shown in the attached image It is I'm not particularly unhappy with this coloring, so I don't plan to return it, but I'm not a fan of the color scheme If you have one, please take note of it
Next, as many of you may know, the 39Thirty type of NEW ERA is the back of the head There is no Size Adjustment Adjuster, and the rubber is laid down to frame the head, which It is a MODEL to be fitted to the head by the Hence you cannot hang it on your waist or bag with Carabiner etc
And the Green Line was a darker green than the product image I think that's the closest shade to the real thing in the attached image Although it differs from the product image, I personally was rather happy about this point
Lastly, the Seal (SizeSticker) on the brim is not included in the product images, but it is actually was put up properly By the way, there are pros and cons, but I'm in the camp to remove it
I'm very happy with the product itself I've been looking at a few Cap products, but this one is simple in design and well made, and it's a good choice for a commercial I think it's the best of the
It seems that product availability is often missing due to imports I was finally able to purchase it The person who wants to buy it is recommended to check the stock situation by peeking at an item page periodically
I hope this helps someone else
View detail
Fits: KAWASAKI Ninja 300 ABS KRT Edition, KAWASAKI Ninja 300 ABS KRT Edition, KAWASAKI NINJA 300 ABS SE 13, KAWASAKI NINJA 300 ABS SE 14, KAWASAKI NINJA 300 SE 15, KAWASAKI NINJA 300 SE 14, KAWASAKI NINJA 300 SE 13, KAWASAKI Ninja 300 ABS Winter Test Edition 2017, KAWASAKI NINJA 300 ABS SE 15, KAWASAKI NINJA 300 13, KAWASAKI NINJA 300 14, KAWASAKI NINJA 300 15, KAWASAKI NINJA 300 16, KAWASAKI NINJA 300 ABS 13, KAWASAKI NINJA 300 17, KAWASAKI NINJA 300 ABS 14, KAWASAKI NINJA 300 ABS 15, KAWASAKI NINJA 300 ABS 17, KAWASAKI NINJA 300 ABS 16
Wow that's cool
I installed it on z250. Tank shape is the same as ninja 250, so after mounting it is Tank Bag and Styling is not broken and a word of coolness.
Installation is Small but I firmly attach magnet and hook on Tank's neck Strap.
Since there is no manual, feel fearlessly.
Three magnets are attached at one point around the crotch, but this one is separate from Bag why Magic tape sticks to the Bag side Spec. Like ... Bag itself is stable, but after all the pasted Magic tape comes in Gap. Why this Spec. Is it?..
Slightly Minus with the feeling there. After all the price. Even there Minus.
The form of installation is very cool, I would like to Recommendation if I am suffering from Tank Bag.
(The delivery date is quite long due to purchase from overseas)
View detail
Fits: KAWASAKI Vulcan 1700 Voyager 09, KAWASAKI Vulcan 1700 Vaquero 2011, KAWASAKI Vulcan 1700 Voyager 10, KAWASAKI Vulcan 1700 Voyager 11, KAWASAKI Vulcan 1700 Voyager 12, KAWASAKI Vulcan 1700 Voyager 13, KAWASAKI Vulcan 1700 Voyager ABS 09, KAWASAKI Vulcan 1700 Voyager ABS 11, KAWASAKI Vulcan 1700 Voyager ABS 10, KAWASAKI Vulcan 1700 Voyager ABS 13, KAWASAKI Vulcan 1700 Voyager ABS 12, KAWASAKI Vulcan 1700 Voyager ABS 15, KAWASAKI Vulcan 1700 Voyager ABS 14, KAWASAKI Vulcan 1700 Voyager ABS 16, KAWASAKI Vulcan 1700 Voyager ABS 18, KAWASAKI Vulcan 1700 Voyager ABS 17
It is a good item
Handlebar Clamp, something.........
Although it seems to be OK even if you do not exchange it, you can see the goodness by trying to replace it.
It took me two months to order but I am satisfied..
View detail