Reviews
For Exhaust System production
I purchased this product to make an Exhaust System for my YamahaXV750E.
Various Pipe diameters and bending angles are available, but the one selected this time has a diameter of about 38.1mm, a thickness of about 1.6mm, a bending R of 100, and a bending angle of 180°.
We chose Steel, of course, because we make SteelOnly for the convenience of MIG welding.
I didn't specifically choose it for its sound quality or performance, so if I had the equipment to weld Stainless Steel, such as TIG welding, I would choose Stainless Steel without hesitation.
I thought 38φ was thin for a 750cc 2 cylinder? I thought so, but it is a little thicker than the OEM bore.
OEM exhaust pipes are double-tubed, so the inside diameter is narrower than it appears.
Since thicker is not better, we plan to start with 38φ and gradually expand it to 50.8φ at the aggregate.
The Pipe itself is a very ordinary wound Pipe, but the quality was good.
The dimensions were also as described, a 180 degree Turn with a Beauty R.
In this case, the twists and turns and the sprockets were necessary because it was to be made for a rear bank.
I went to the trouble of choosing 180 degrees, but I ended up chopping it up lol.
From here, the angle is adjusted to make it.
In addition to NeoFACTORYBrand, CFPoshBrand seems to have something similar. I am not obsessed with it, so I will try to use CFPosh as well.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily
automobile inspection approved goods
The width of the handlebar was almost the same as the OEM handlebar width, so it passed the inspection. The vehicle height was measured with the speedometer in the NORMAL position, so only the width was noted. I am satisfied with the position of the handlebar. View detail
Fits: HARLEY-DAVIDSON
Strongest Needle?
SUcarburetor's Needle.
BCG. part number, like vaccinations (laughter)
The reason why I bought it is because it is called the strongest (laughs).
Well, I'm not sure. In short, it is thin.
Looks like something Umeyasu Fujieda would use (laughs).
When I buy Needle from the UK, it's gold.
This is a very long term inventory (laughs).
It's pretty dull (laughs).
Also. it came in a Vinyl bag.
It's a bit of a mess to handle. You'd normally put it in a Case:。。。。
It's something that shouldn't be bent.
A little disappointed.
View detail
It really doesn't fog up.
I think Shield's Mirror feel is also good without being cheap.
It's an Anti Hog Spec. so it's almost fog free. I only drive in the Kanto area, but I can immediately eliminate any fogging of the Shield caused by breathing leaks from the nose and mouth during the winter months, and it doesn't bother me at all.
I personally believe that Biltwell products are quite reliable in their manufacturing.
View detail
Safety wire wrap/cutter
I gave a place in my toolbox.It's definitely a luxury item, but I think it's worth it. They make setup very easy and work exactly as you hope. The quality and feel won't surprise you, but they're good for the price. The cutter isn't great and for some reason it doesn't work close enough to the pivot point which is kind of annoying Handles safety wire like a champ, could use cutting edge run all the way to joint, there is a about a 1/2" where there is no cutter but that is nit-picking. Used it on three sets of grips with no issues.cut through the wire fine without damaging themselves, and I expect them to hold up for a long time View detail
Fits: HARLEY-DAVIDSON Universal
Required for MooneyTail.
I used it on a Kawasaki 250TR Tail lamp (MooneyTail). It works fine, but it interferes with the lens unless you use a short bulb. I bought a regular bulb without knowing it and had to buy a new one. View detail
Bullet blinker set/!!
This is a good product that is not sold anywhere else.
The price is not expensive and it seems like a good product to try.
But my motorcycle muffler is interfering and I need to touch the bracket a bit
Still, the work was perfect and it became pretty!
Recommend to others! -------------------------------------------------- -------- It is a good product that does not sell elsewhere. The price is not expensive and it is a good product to try. But my motorcycle muffler interferes with a little bracket. Still, the work became perfect, so it became pretty! Recommended for others! Powered by Google Translator
View detail
turn signal reviews
Like the rear, I bought it while looking for a turn signal with a similar feeling.
The work is not difficult and the overall look is neat and pretty.
The price was not as expensive as expected
If you are looking for a turn signal like this, I highly recommend it.
I love it! -------------------------------------------------- -------- Like the rear, I bought a turn signal in a similar feeling and bought it. The work is not difficult and the whole is neat. The amount was not as expensive as I thought If you are looking for a turn signal like this, this is a strong recommendation. I like it so much! Powered by Google Translator
View detail
Taillight review!
This is the product I've been looking for for a long time!
It's not a chopper or an old school, but I wanted to decorate my bike in a classic way.
It couldn't have been a product I really liked.
The work was easy if I connected it exactly as it was described.
The price was neither expensive nor cheap in my opinion.
I just thought it was a product worth investing in.
I love it!!! -------------------------------------------------- -------- It's a product I've been looking for for a long time! I'm not a chopper, but I wanted to decorate a bike with a classic It was a favorite product. The work was easy to connect as described as described. It wasn't cheap because it was expensive or expensive. I think it was just a product to invest. I love it!!! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON Vehicles equipped with OEMPoint
6vEnginePoint Ignition Condenser
It arrived as per Image and was installed without any complaints. View detail
I appreciate it in many ways.
As a Tie Wrap, of course, it could be used without any particular problem.
I really appreciate being able to buy per pc so I can adjust my shipping to get free shipping and not have to waste my money on unnecessary purchases!
View detail
Thanks just for selling Inch Bolt other than Stainless Steel.
Anyway, thanks for selling just one non-Stainless Steel Inch Bolt.
Stainless steel cannot be combined with aluminum due to electrical corrosion problems.
Black dyeing also rusts, so it's great that it's Chrome plating.
Quality is OK, too.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily
buckhorn handle
Delivery is fast too
The packaging was excellent, so it came without damage.
It is difficult to install the handle by burying the wire, but it is difficult to work by pulling the wire out
It's not very difficult.
Definitely changing the steering wheel makes the position itself more comfortable and it's so good.
It's cheaper than other companies and it's so good!
Recommended! -------------------------------------------------- -------- Delivery is fast It also made the packaging excellent, so I came without a wound. It is difficult to reclaim the handle, but it is difficult to remove the wiring. It's not very difficult. Certainly changing the handle, the position itself makes it easier and so good. Compared to other companies, it's cheaper and so good! Recommended! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Grip review
The price is reasonable and seems to be cheaper than other companies.
Delivery is fast too
The packaging came perfect too! I love it!
The color is nice, but it's a pity that it burns a little.
Anyway, I recommend it!
If you want to make a classic bike, I really recommend it! -------------------------------------------------- -------- The price was appropriate and it was cheaper than other companies. Delivery is fast The packaging is perfect! I like it so much! The color is also good, but it's a pity that the time is a little burned. Anyway, I recommend it! If you want to make a classic bike, I really recommend it! Powered by Google Translator
View detail
Spring is a dented.
The mileage of his beloved 98XL1200C is 108,000 km.
Spring was dented and STAND was hit when laid down a little at LeftCorner.
When I replaced it, STAND returned crisply and improved. I wish I had replaced it earlier.
When replacing, remove the STAND and apply Spring to assemble. Spring will not extend by human power.
View detail
This is a foul at this price.
This Net is foul at this price.
Easy to use and good product
Hook is plastic but easy to hang.
Cospa best
View detail
Parenthesis is better
I like the matte, cheap-looking look.
Large is also good.
One point, it would have been even better if the inside hole was a little longer.
I have it on an unmarked Jet helmet and it is pushed in a bit.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily
Good looking and easy to ride.
Installed on a 2021 YAMAHA BOLT Shoulder Bag.
I had to adjust the orientation of the BrakeBanjo a bit, but I was able to install it without changing the OEM wires.
The Position is just right and looks and feels custom at once.
View detail
Fits: HARLEY-DAVIDSON Universal
It becomes a good taste when you use it.
It is White, so at worst it will show dirt, but at best it will have a nice taste. View detail
Cospa best
I recommend it because it is inexpensive. The quality is no different from other products.
It is a good idea to have a spare one for peace of mind.
View detail