Reviews
At last, we are at the end of the 50base bore up.
I have bore up with SUPER CUBOEM 50→75→85. This time I tried 85→88.
4MINI's standard Tune, Bore up, you hear it a lot, don't you?
What is Bore up? Bore up means to increase the engine displacement volume by enlarging the cylinder diameter (bore diameter). 。 Increase engine displacement volume by replacing the cylinder or by replacing it with a larger piston. 。 The purpose is to increase acceleration by increasing Engine Displacement Volume.
Basically, it is generally recognized that the object of modern bore-up is not a car but a motorcycle, because unlike a car, the engine of a motorcycle is made of iron →analog, so parts can be easily replaced. Cars are made of aluminum, which is not suitable for bore up.
Merit of Bore up
◎Ability to improve acceleration performance and Torque 。
◎30 km limit for Class 1 mopeds; two-step Right turn is no longer required. (Notification required)
◎Largeest load capacity also increases from 30 kg to 60 kg.
Demerit of Bore up
◎ Will it shorten the life of the Motorcycle such as Engine? →I guess it depends on how you ride and the degree of bore up.
Oil management is severe than OEM. 2000 km oil change.
◎Tax Gold will increase 。 Insurance needs to be reviewed with the Engine Displacement Volume change.
Clutch and other parts are slippery. Clutch capacity is adjusted to the original engine displacement volume, so the capacity will be exceeded.
◎Failure to file an application for an alteration act could be considered tax evasion.
Bore up increases the Engine Displacement Volume, so it is necessary to report the modification. 。 Specifically, you will submit a proof of registration of modification at the tax department of the city hall. You will need to bring your personal seal (inkan), the License Plate that you have been using, and documents that prove that you have increased the Engine Displacement Volume by modifying your vehicle. 。 Proof of Engine Displacement Volume change is Large sturdy, such as a receipt for a special kit purchased at the time of bore up.
In my case, I bore up the crank and cylinder head to reduce the workload and safety margin, and use the OEM50 as it is.
I would like to write about the good and bad points in this relatively easy Bore up.
Where is the best Manufacturer?
There are a lot of companies releasing these products, including Takegawa, KITACO, DAYTONA, and Clipping point, which is the company we used this time.
Clipping point also has a store on YakuOff, and they are very helpful in answering questions such as confirmation of fitment, and I think their parts are highly accurate. I also like that their prices are relatively reasonable, so I like to use their services.
good point
◎Number will be White→Yellow color, so you will be less likely to be agitated on the road. (Subject to notification, absolutely.)
◎I am impressed by the Torque and acceleration which is incomparable to 50. 50→88 has 1.76 times Engine Displacement Volume, so it is a different vehicle (laugh).
◎Touring performance is also improved:since the car does not run at 30 km/h, it can run with the normal flow of traffic and does not interfere with traffic.
◎The Instruction Manual that comes with the Kit is easy to read, so even unfamiliar users can do it.
◎The accuracy of the parts is not bad, and the price is reasonable and I think it is from the user's point of view.
◎It normally weighs 80 kilograms. Without any pressure (laughs)
Bad points ... or rather, things that should be done.
◎The compression ratio of the Up Kit, in which only the cylinder and piston are replaced while the head remains the same, is higher than that of the Normal Kit because the volume at top dead center remains the same. Therefore, the ignition point temperature is higher. (flame retardant) Please make it high-octane.
Regular is fine, but since it has high compression, the exhaust heat cannot keep up with the normal 60 km/h run, and it will burn out. 。 Most large bore ups have high compression, so I specify high octane for heat exhaust. 。 If the high compression is less than 30 km/h, I think RegularGasoline would be able to handle this.
However, if you weigh the cost of putting regular gasoline in the car with the cost of repairing the broken gasoline, it would be cheaper to put high octane gasoline in the car.
Install High Camshaft + change the GEAR ratio (change the Large size of Sprocket...I set it to 14 in front and 36 in the rear.) If you don't do that, the maximum speed will not increase at all (lol).
◎You should increase the size of the carburetor. 50OEM can only intake up to about 75cc. I think you should use an external or OEM90 carburetor.
Reinforced clutch at a minimum. increase the size of the oil pump if there is room.
From my experience....75cc is the limit for NORMAL50's clutch and oil pump....even with 75cc, I have experienced the clutch slipping and the cylinder valve melting...(laugh)
Comparing the 75 and 88, the 88 has more Torque, but it requires a stronger oil pump and an extended orifice, and a reinforced clutch is also necessary.
If you keep Normal head and Crank is 50, I think Bore up88CC is the limit.
So, what's the attraction? You may be thinking, "Well, I can do it by myself only above the waist, and since I am free from the 30-kilometer limit, I can really use it as a daily leg.
We do require a minimum of notification, Clutch, and Oil pump, though. This alone is safe.
It is less expensive than buying a new Motorcycle with the above Engine Displacement Volume. It depends on how much bore up you want to do, but it won't cost you that much if you can use the OEM parts.
If you have done the bore up yourself once, there is also the convenience of being able to fix it as soon as it breaks.
For now, just try Bore up. It will be a completely different ride. But it's a hassle to manage the oil, etc. (laughs).
I am planning to replace it with CUB90 OEM in the near future.
View detail
CLIPPING POINTTouring 110cc Kit+High Camshaft (mid-high speed)
I used to have 88cc, but I really wanted to change it to 110cc with 6V. 110cc has a wide variety and this time I chose TouringSpec. I am glad I bought it because the power and torque are totally different than 88cc. View detail
Long-established TuningParts with good cosmetics
[How is it used?
We had been increasing the power output by modifying the OEM 6VHead, but we felt the limit and introduced an external head.
Was the one you received as per Image?
I don't dislike recent brands, but I chose Clipping point because I wanted to use a long-established, traditional manufacturer's product. I think it is well made and of high quality.
Was the installation difficult?
It is not difficult if you follow the instructions. 6VMONKEY, you should always check the Crank length. (I am SCrank).
How was your experience with it?
The output was as expected. I was particularly impressed with the Decompression feature, which I thought was a sign of the times…. Compression is reasonably high and durability seems good.
[Included Parts:were they on?
Custom work is possible with Kit alone.
[Was there anything that disappointed you?
Nothing in particular. I don't know the difference from the famous Brand in detail, but it is enough for me. I am also satisfied with the historical Brand.
View detail
Product # mab271018nstdcl
After changing the relative values of the stars and installing a larger cylinder on my HONDA MONKEY, it was hard for the engine to unwind in top gear. To eliminate this problem, it was decided to replace the carburetor with a more productive one. One of the conditions was to keep the original filter. I am satisfied with this product, it has covered all my needs. View detail
Can also be installed on AA09
The product includes For the 110cc JA10." but it could be installed on a 50cc AA09.
After removing the sensor and injector coupler attached to the throttle body, the air cleaner box, throttle wire, and other items that secure the throttle body to the car body are removed, and the sensor and O-ring etc., and put them back on the car body.
Resetc. of ECU was OK if you refer to the blog etc.
Tools, etc., are required to purchase a special Bit at Home centeretc. since Torx screws are used, but even an amateur could do the work.
The original installation was about 19φ, so the diameter is about 5φ larger, but the ECU compensates well, so it works fine.
View detail
PowerUP Experience♪
CROSSCUB110 (JA60) The kit is a Big Throttle 24 & Phi; kit for the Big Throttle 24 & Phi;. We could feel the power up right after replacing the kit......especially from the 2nd gear. (NORMAL14T) I think it is different from NORMAL in synergy with the effect of replacing the (←This is just my opinion) The replacement was done at a familiar Motorcycle shop. The replacement was done at a Motorcycle shop that I am familiar with and was OK without resetting the CPU. However, the replacement of the air cleaner pipe requires familiarity and rubber-like adhesive. I am glad to have exchanged it because it is more cost-effective than Exhaust System exchange. View detail
Cospa good
Probably OEM parts for other Honda models, but the quality is good.
The replacement increased Torque from low to high RPM.
I also changed the air cleaner at the same time, so it may be a synergistic effect, but I can feel the effect, so I'm OK with it.
Torque up and head banging got better by replacing the Exhaust System, but if you don't need to change the sound and appearance, I think replacing the Throttle body is a good and cost-effective Custom.
View detail
Webike for JA45, from three different companies, so I'm worried!
Webike happened to have Outlet items available and I was able to purchase them at a discount!
The performance is probably almost the same as other companies. The instruction manual of this product is almost only for Torque management. (If you are not confident about installation and initialization of each sensor of ECU, the instruction manual of SP00000 may be more helpful.)
After installing it, I feel that the TorqueUp is effective at full acceleration from low speeds and near top speed, but there is a feeling of gasping during acceleration from a constant speed of about 4,000 to 6,000 rpm, which is the normal range. I replaced the Exhaust System and BigThrottle with a Normal engine, so I think the A/F ratio is very thin.
I would recommend the use of a sub computer or fuel booster cable. I wanted a sub computer but could not afford it, so I added a fuel booster cable. (BOOSTER and Quantity):(If you want to buy a set, I think you can get a good deal on a set made by 00-do, and they say you need a sub computer for high camshaft and bore up).
View detail
Fits: HONDA BENLYCD90
good
Rave reviews for the real fast delivery!!! It's in a perfect condition.The company! I like the products, so I keep using them View detail
CLIPPING POINT Large Carb 16 Φ Set
After finalizing his Honda Little Cub, his native carburetor needed to be replaced. The main part of the presented solutions was accompanied by a change in the design of the air filter, or did not fit structurally. This kit allowed me to solve all my wishes - to leave attachments and the filter unchanged, and also to solve the problem with low power. Before the first start, it is necessary to loosen the throttle cable, otherwise the engine will run at high speeds. There is a wish that the manufacturer included several jets in the kit, for more precise tuning. -------------------------------------------------- -------- After finalizing his Honda Little Cub, his native carburetor demanded a replacement. The bulk of the presented solutions was accompanied by a change in the design of the air filter, or did not fit constructively. This kit allowed me to solve all my wishes - to leave the attachments and filter without changing, as well as solve the problem with low power. Before the first launch, it is necessary to weaken the gas cable, otherwise the motor will work at high speeds. There is a wish that the manufacturer includes several nozzles for a more accurate tuning. Powered by Google Translator View detail
Clipping point High camshaft ST-1
This high camshaft, which is just bolt on. Can feel the power increases from mid to high end. The best part is low end power still the same. Its an all rounder. Also prices are reasonable. View detail
I am satisfied
After replacing it with a self-driving car, it gave very satisfactory performance as a result of short-distance driving.
In the second gear, similar power to the first gear was given, and the overall torque was increased, so the throttle response was greatly improved.
Whether the engine will be damaged will have to be seen after more driving, but I don't think there will be any problems. ---------------------------- After replacing it with self, the short distance driving gave a very satisfactory performance. In the second stage, the one -stage power was given, and the torque increased as a whole, and the throttle reaction was very fast. You'll have to see if the engine is going to be overwhelming, but I don't think there will be a problem. Powered by Google Translator
View detail
To APETypeD
Installation is easy as long as you follow the instruction manual.
You will need a stand holder for Rear Sets and a kick pedal.
View detail
Clipping point for honda monkey - looks amazing
Beautiful exhaust with a fine finish. On a 4-speed transmission, this one sounds nice and deep. With 3 gears this one sounds a little less good, a little shrill. The original honda heat shield can be mounted. View detail
It's easy to image chain
Matching with Clear tail of Takegawa is also good. I have no complaint. View detail