Reviews
Satisfied with the build quality
Compared to the OEM Product, the GEAR is twice as thick, so it seems to be perfectly strong. The Bolt of the OEM Product was loose when it was replaced, but there are no loose parts in this product, so it seems to be safe to use.
However, I was quite hesitant to purchase it because of its high price. However, the price was too high and I was very hesitant to buy it,
The replacement was also a simple installation and the symptoms before the replacement were improved, so I think it was an inexpensive purchase for the future of my Motorcycle life.
View detail
Great product.
Used for Ducati MULTISTRADA 1000DSDS.
Until now, power supply was taken in an unattractive manner, starting with a direct power supply to the backup power supply and forcibly branching out from a break switch or the like.
I have been thinking about using it the next time I get a 12V power supply since it was released a few years ago. I finally found a good Timing and decided to use it.
While recent motorcycles are equipped with an attachment power supply from the start, motorcycles made in the 2000s and earlier are often not equipped with one.
However, MULTISTRADA 1000DS is fortunate to have an Ignition-linked power supply, from which it gets power for Relay.
D-UNIT is what is called a "Badded Direct Relay," but the good thing is that it can be easily assembled without having to think about anything difficult, and this WaterRegistrant is waterproof.
One can take out 3-pole.
Depending on the vehicle, it may be necessary to obtain power for ON/OFF from a brake switch, but the D-UNIT itself is so small that it can be installed in any location.
It might be a good idea to take it from Rear brake, etc.
I would like to use it when I switch to another vehicle.
The 6-poleSpec. was also on display for reference at the Motorcycle show, and I would love to see it sold.
View detail
Large satisfactory considering the price!
Satisfied with both brightness and visibility.
In actual use, I prefer the 4500K recommendation.
View detail
Very happy with purchase
Bought this as a north American buyer, received the item 4 days later, perfect packaging. The light diameter is the same as the OEM on the Yamaha XSR900. Very please with the quality of the product. View detail
Fits: HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUB110PRO
very good
I really liked this product. It was cheap and the delivery was very fast. I will definitely use it again next time. Thank you. You can definitely feel that the quality of the parts is different from other products.It was also very easy to install. -------------------------------------------------- -------- I really liked this product. It was cheap and very quickly delivered. Thank you again. It seems that the quality of the parts is certainly different from other products. The installation was very easy and good. Powered by Google Translator View detail
Mast for those who want to add electrical equipment.
DAYTONA's D-UNIT can add an electrical system to your motorcycle, helping to expand the electrical system. Once connected, multiple electrical parts can be added as an attachment power source.
D-UNIT is designed to be easy to use, so you don't have to think about the Relay mechanism:just connect the Red Stag beetle terminal to the Battery Plus, the Black Stag beetle terminal to the Battery Minus, and the Red Bullet Terminal to the Motorcycle Attachment power supply. The Red Bullet Terminal is connected to the Attachment Power Supply of the Motorcycle, and the four largest electrical parts are connected to the (up to 20A) Can be added.
This allows for the addition of electrical parts such as DriveRecorder, ETC, USB port, etc.
Furthermore, D-UNIT's Electrical Parts are reliable and safe. The solid design is likely to prevent Trouble and Short in the electrical system.
D-UNIT's electrical parts are useful items for those who want to expand the electrical system of their motorcycles. With easy connection and high reliability, they are both easy to use and safe.
View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
Easy power supply extraction
[How is it used?
GSX-R600 (K6) I purchased the Accessories power supply to pull Accessories power from the
I thought I would make it with Bullet Terminal since I only needed to branch Harness, but it looked easy enough, so I bought it.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
Although the applicable year was 2007, I bought it thinking it would work for 2006 as well, and it worked fine.
It is very easy as it is just a matter of interrupting the Wiring Connector that goes to the Tail lamp.
[Points to note]
Not particularly
How did it compare to other products?
Not really a product, but I was thinking of processing Harness.
It is more expensive, of course, but the price is worth it because Accessories power can be removed in a few seconds and restored immediately.
【Review】
It is easy and good for those who are not very good at Wiring processing.
It is also time-saving because all you need to do is connect the Bullet Type Terminal to the Bullet Type Terminal of the electronic device you want to interrupt and use.
View detail
For charging Lithium battery with SAEHarness installed
[How is it used?
Used to charge BCLithium ion battery.
Was the one you received as per Image?
Used for ChargerBC BRAVO 2000+.
Was the installation difficult?
Simply connect it to the BC BRAVO 2000+.
How was your experience with it?
I was able to charge the battery properly.
[Included Parts:were they on?
Included Parts:is a product with no specific
[Was there anything that disappointed you?
I have no complaints, but I do think it is more expensive than other companies' Harnesses.
Other items that would be helpful
The connection cord on the car body side that is directly attached to the battery originally included with the BC BRAVO 2000+ is too long for my vehicle, so I purchased a SAE Harness from Universal Product for car bodies with shorter lengths and used this for The connection and charging through the Harness is good.
View detail
For Motorcycle.
Length, Cover, Shape.
I am satisfied because of MotorcycleExclusive Design.
View detail
Anyway, it was in the way.
The stock blinker sticks out so far that it bends when passing through a narrow space, so I decided to go with this compact blinker. The blinkers are a mud black color, so it's hard to tell until you turn the lights on. It is compact, but when lit, it is bright enough to see clearly even in daylight. The blinker could be broken even by standing up, so I am not worried about it. The durability of the product is yet to be determined, but many riders around me use the same product and it has a good reputation, so it was a deciding factor for me to feel secure. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily
Installation is easy
Installation is by OEMTail mounting Screws with Quantity:Just remove and replace the 2pcs. It's easy.
I think it's good for the Beauty Custom...
View detail
Particularly good for places where there is a lot of ROSS
Reusable Tie Wrap for easy removal.
It is especially effective for parts that are frequently removed and attached. It is a little thicker than regular tie wrap, so be careful, but I use it to tie parts that are often removed when disassembling.
Off-road motorcycles are especially used for this purpose.
The thicker the wire, the sturdier it is, so there is no need to worry too much. However, if you cut the extra length, you can only use the same length or a shorter portion.
View detail
The ability to release as intended is still an advantage.
Vehicles used in Races and competitions are often cleared.
If Tie Wrap can be Released in such cases, it can be used once more.
This is important.
But it's not cosmetic. Definitely.
But they are SDGs. Because they can be reused.
Even if you are not a "good" person, you don't have to use a nipper to cut it, so you don't have to choose a place for it. It is surprisingly possible even in a gap where tools cannot fit.
View detail
Buy Titanium
It was installed in a nice way. I am satisfied. View detail
There were no problems.
The light came on without any problem. I was able to use it normally. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
When I changed to LED Bulb.
LED Bulb light now illuminates the front of the car. View detail
A must for anyone who does Smartphone Navigation.
I had it installed at Shop before delivery.
I use my phone as Navigation and it is very useful.
I bought and use a short charging Cable of about 20 cm, and I recommend that you prepare it separately for your convenience.
In this day and age, I really want USB power supply to be a Standard Equipment for Motorcycle (laugh).
View detail
MINIMOTO6VMONKEY Silicon Rectifier Fire to Regulator
I have two 6V GORILLAs, so I installed the first one and the voltage became very stable and the battery life improved dramatically, so I installed the second one as well. I did not want to change to 12V, so I bought it to keep driving with 6V. View detail
CGC CGC160 Square Flasher
I had installed the Square Type Black Clear Lens on my Motorcycle about 40 years ago and I wanted to buy it. I wanted the Square TypeBlack Clear Lens and was able to purchase it this time! I would buy it again as a Spare item, as it is a very reliable Brand that I personally trust. View detail
Fits: HONDA Super Cub 50, HONDA CUB PRESS, HONDA GYROX, HONDA LITTLE CUB, HONDA TODAY, HONDA ZOOMERX
Halogen is still active
I have tried many things, including external with Color and Valve, but the OEM Halogen light is the easiest to use and I returned it.
Nowadays, LEDs are used in new cars, and Halogen light is still old-fashioned, like the Image of old.
But when I looked into it, I realized that it is quite practical.
The first time the project was completed, the project was completed.
Halogen light
A type of white light bulb that generates heat by passing an electric current through a tungsten filament (resistance) and emits light by blackbody radiation due to high temperatures of up to 3,000 degrees Celsius. 。 The difference is that Halogen gas is sealed inside the valve in addition to inert gas.
Features,
Smaller in size than white light bulbs
● Light is stronger than white-hot bulbs, and gets considerably hotter.
It is used in situations that require spot light intensity, and is also used in Stage lighting due to its strong light emission. 。 In addition, the brightness and color temperature rarely change while the power is on and the lights are turned on.
→Easily adopted for Motorcycle and Car headlights.
Advantages of Halogen bulb
Long life. →.
In a white light bulb, Tungsten, which is the filament, evaporates and becomes thinner as it is used, and at the same time, the evaporated Tungsten adheres to the glass surface called Valve and turns black, resulting in a decrease in illumination. 。 In contrast, Halogen bulbs have a longer life than white-hot bulbs because evaporated Tungsten returns to TungstenFilament by HalogenCycle using Halogen gas added in the Valve.
2) High brightness →.
Superior heat resistance and higher temperatures than typical White Heat bulbs, allowing for higher voltage and higher luminance 。
(3) High heat and shock resistance→.
Quartz glass is used in the valve to handle high temperatures. Quartz glass is made from quartz and is characterized by its excellent heat resistance, impact resistance, and transparency. 。 As for heat resistance, thermal expansion is very small, making it resistant to sudden changes in temperature.
[Characteristics
Halogen light is inexpensive and has good transparency.
The brightness of halogen bulbs is inferior to HIDs and LEDs, Soft luminescence that does not dazzle when looked directly at." features.
Halogen light is more transparent and easier to be detected by others when it rains heavily. However, Halogen bulbs do not illuminate the road surface more than necessary, so there is a Merit that allows driving with sufficient visibility even in the rain.
Halogen will always pass the safety standards required for vehicle inspections, etc.
OEMs are required to meet safety standards, etc. [Color] I decided to try Halogen light, which is used by OEMs if you are going to buy it, since it is shipped in a CLEAR condition.
I was also convinced that practical cars with Halogen attached are still working in the market.
good point
Easy to drive at night. ◎Easy to drive at night.
◎No reflection of the road surface.
◎Visibility there even in bad weather.
◎Low cost. ◎Low cost, yet meets safety standards.
◎Bulbs are hard to burn out.
◎Do not bother the car in front of you or oncoming traffic.
A bad point
▲Image is often viewed with the prejudice that it was a long time ago.
Halogen head lamps are inexpensive to purchase and easy to replace.
The disadvantage is that the brightness is weaker than DischargeHead lamps and LEDHead lamps, but there are many Merits to continue using them in terms of safety standards, cost performance, and convenience.
View detail