Reviews
ZOOMER Separate shop
I haven't installed it yet, but it looks very solid and luxurious. View detail
Build quality is good and still like PP products.
Fitting On: SR400 Different: Lower posture than original, tracker style liked. Opinion: This handlebar is 0.5" shorter compare to left and right grip position when placed in the center of the clamp. You can either live with it or grind off the extra length. View detail
nsr50Racer Clamp handle
The OEM nsr50Handlebar and the Sauce angle are the same, so it is not hard to ride at all. the best part is that the Clamp handle can be replaced only with a new bar when it is bent due to a fall, so you can save money in case of a fall. I also appreciate that each Product Contents can be replaced. Something I will continue to use! View detail
Fits: APRILIA RSV4, HONDA CBR600RR, KAWASAKI ZX-25R, SUZUKI GSX-R125, SUZUKI GSX-R150, HONDA CBR1000RR-R, KAWASAKI ZX-10R, KAWASAKI ZX-4R, HONDA CBR1000RR, YAMAHA YZF-R25, HONDA VFR400R, SUZUKI GSX-R150, SUZUKI GSX-R125
Position is easy
I was not sure about A Type, but I bought this one.
Installation is only a matter of replacing the Top Bridge if it is removed, but it is possible to relocate the Master tank (Material:Aluminum 60mm bracket installation relocation), Brake hose replacement if possible (I removed the Brake hoseMounting Bracket near the Radiator to increase the range of motion a bit) Clutch Wire is short (Wire routing will be changed &arrarr;WireLong Type) I might have been better off asking PRO to do the CouplerBracket relocation, etc., for the Front fork. (Individuals can also do this)
View detail
HURRICANE TYPE I
About quality and texture The texture is average, due to the steel reason About the use experience Multi-angle adjustable, this is the biggest selling point Products purchased together rearview mirror Installation difficulty The difficulty is high, it is recommended to go to the repair shop to install Cost-effectiveness and comparison with other products Very cost-effective About shipping and packaging General packaging Any concerns, cautions or advice when purchasing no suggestion View detail
Racing handle is Battle Factory
I am using this handlebar on a cafe bike (HONDA TMX155) that I am currently building. The construction is simple and it is just light. I think it is a great handlebar for cafe style. I bought several separate handlebars in the Philippines, but they were of poor quality (the handlebar diameter was 21.8mm instead of 22.2mm, the construction was complicated, etc.) and I could not find a suitable one. This product is of good quality and I am very satisfied with it. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR
Texture and Position are good
It is almost the same as NORMAL, but Radial master can be attached and the texture is good. View detail
Stylish Handle ever
It is a cafe-style handle with the coolness of aluminum cutting and a light and cheerful grip. I would like to recommend it to sr400 users who are looking for a cafe style. The price is very reasonable and the steering wheel length is suitable, so it is very comfortable to drive. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZR250R, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RGV-Γ250, SUZUKI GSX-R600, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10R, HONDA RVF, HONDA NSR250R, HONDA CBR400RR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR150R, HONDA CBR1000RR-R
conscientious pricing
It's similar to a certain company's Handlebar, but the price is much lower.
I bought Lever Guard at the same time and both are very good.
View detail
Fits: HONDA VTR1000SP, SUZUKI GSX-R1000, SUZUKI GSX-R600, KAWASAKI ZX-10R, KAWASAKI ZX-6RR, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZXR400, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA RS250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA RVF400, HONDA CBR1000RR, HONDA RVF750, YAMAHA TZR250, YAMAHA TZR250
OEMHandlebar passes too …………………
I introduced it because the Handlebar of VTRSP is too far away and I wanted to make it closer.
It is open but easy to use.
The hanging angle is 10 degrees, but I think something like 7 degrees would be good for Touring.
It is Race shop quality, so it is Simple and good.
View detail
Fits: YAMAHA RZ50, SUZUKI WOLF50, HONDA CB50SJX, HONDA CB50S, HONDA CB50
“Separate handle” is this position!
I changed to HURRICANE Handlebar on WOLF50 because I didn't like the Handlebar on Top Bridge. 27Φ FFork diameter of RG50,WOLF50 is not so easy to find, but I am thankful that new one is still available. … View detail
Quintessential Babyface!!!!
Separate handle for Babyface.
There are many different positions to choose from, so you can create a position to your liking. I set the height and aperture angle to the largest, and it became a very easy position to ride on. ！！！！！
Since NINJA Position is not willing to do OEM. Recommendation to anyone who is about to run with the NINJA2 Helmet 50RR!
View detail
Fits: SUZUKI GSR750, YAMAHA XJR400R, YAMAHA XJR400, HONDA GROM, HONDA CB400SF Revo, HONDA CB400SF vtecIII, HONDA CB400SF vtecII, HONDA CB400SF vtecI, HONDA CB400SF, HONDA CB1100EX I, HONDA CB1100EX, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1100, HONDA CB1100 I, HONDA CB1100RS, HONDA NC700S, HONDA CB400SB vtecIII, HONDA CB400SB Revo, HONDA CB250F
Easy Separate handle
It was an excellent product that could be easily converted into a separate handle in the same way as a normal handlebar exchange.
Good point.
? The price is not so bad, but the quality is satisfactory.
I have been using it for 6 years without any problems.
The GSR750 was able to be pimped out and will pass inspection without modification.
There are many positions that can be adjusted with the?screw, and it is a great way to find the position you prefer for your motorcycle and rider.
Not so good? Point
? This is just a fancy separate handle.
It is not as aggressive as the real Separate handle, so it is a position between the Bar handle and Separate handle.
? In my case, OEMfootpeg makes me feel uncomfortable with the Position.
I am wondering if I should choose Rear Sets.
It is an expensive Handlebar and an additional expense….
General Comment.
I'm kind of glad I bought it.
The OEM Handlebar position did not feel right, and my desire for a Separate handle satisfied my interest.
As a side note, there is a person on the Net who is using Black Painting, and it is very cool.
I should have painted mine before installing it… is my personal opinion.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA XSR155, YAMAHA YZF-R15, YAMAHA YZF-R3, YAMAHA XSR155, YAMAHA YZF-R15
Cannot be installed on XSR155.
Cannot be installed on XSR155.
You can win products for Handlebar Bracket.
View detail
Fits: Others , APRILIA RSV1000R, DUCATI Monster900 ie, DUCATI Monster900, DUCATI Monster750, DUCATI Biposto 998, DUCATI 998SP, DUCATI 996SP, APRILIA RSV1000
I like the way it's made.
The Position of the Separate handle outside the company is too tight, so I bought this one which is a little Up.
The price is reasonable, but the construction is quite solid.
The texture of the paint does not look cheap.
The key Position has also become much easier and can be driven without discomfort.
I'm very happy with it
View detail
![[RaceConcept]RaceConceptHandlebar Kit Flat TypeShort offset](https://img.webike-cdn.net/catalogue/images/64174/R05-HA41050M_01_TS.jpg)
Fits: Others
No compensation for those who bought the MODEL before the improvements?
The pre-modified MODEL that was left out of any Race.
At first, there was no announcement from the manufacturer, and until just before the start of the season, we did not know whether the system would be available or not.
RaceConcept and you're laughing.
The improved model is released and the unimproved model is used in 2Quantity.:There was no announcement to myself of the terminal Racer that was Set.
I will no longer use it.
View detail
Fits: HONDA VTR1000SP, SUZUKI GSX-R1000, SUZUKI GSX-R600, KAWASAKI ZX-10R, KAWASAKI ZX-6RR, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZXR400, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA RS250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA RVF400, HONDA CBR1000RR, HONDA RVF750, YAMAHA TZR250, YAMAHA TZR250
Mounted on VTR1000SP
I replaced the OEM Handlebar with a brembo RCS Adjuster because the Adjuster hits the Meter. I am satisfied with the quality and the adjuster was avoided. View detail
Fits: HONDA VTR1000SP, SUZUKI GSX-R1000, SUZUKI GSX-R600, KAWASAKI ZX-10R, KAWASAKI ZX-6RR, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZXR400, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA RS250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA RVF400, HONDA CBR1000RR, HONDA RVF750, YAMAHA TZR250, YAMAHA TZR250
Mounted on VTR1000SP
I replaced the OEM Handlebar with bremboRCS because the Adjuster was hitting the Meter. The price is reasonable and the quality is great! View detail
Cospa is nice.
[How is it used?
Used for HORNET 900.
Was the installation difficult?
If you can replace the Pipe Handlebar, you can do it.
How was your experience with it?
I like the flexibility of the Position.
Aperture angle, height, and width can be adjusted.
The texture is very high.
View detail
Awesome Handle
The position of the zeta handle is lowered more aggressively than the genuine handle of YAMAHA, but it is not a difficult riding position.Personally, I recommend a back step for this and the recommended product. View detail