Reviews
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
still necessary
Essential tool to remove GEAR to ask for CrankshaftOH.
It is possible to remove it with a piece of aluminum, but it is still this one.
View detail
Fits: HONDA CRF450R 2014, HONDA CRF450R 2015, HONDA CRF450R 2016
It is a Universal Shock Pump!
[How is it used?
It is designed for CRF450R, but since it is universal, it can be used for Shock Pump to inject into air suspension of Harley and for Motorcycle.
Was the one you received as per Image?
I was surprised that it was smaller than I expected.
How was your experience with it?
Even though the size is small, the functionality is not a problem. In fact, the small size helps when storing.
[Points to note]
Recently, many products made in China have been distributed, and there are many different products in the market, but the Gauge display is not always correct, or it may break immediately, so it is necessary to use the product many times as it ages. We will not be stingy and will recommend high quality products.
How did it compare to other products?
We do not trust Chineseness that can be broken quickly.
Recommendation for the maintenance of continuity.
▼The air valve shape is US-style, so it is highly universal. The size of the valve may not look like the size of a normal bicycle, but it is no different from the shape of a valve used on a normal bicycle.
View detail
As you tighten it in.
I use it for Caliper's rubout etc. When I tighten the Screw and open the Plate with 4POTCaliper like NC30, the Plate is not parallel and I can't get the 4 Pistons to be even etc.
The fact that it cannot be pushed in makes it difficult to use. The texture is good, so I would like to have the Guide of Plate as Quantity instead of 1 pc.:I am wondering if I should have purchased the 2pc one.
View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
AF24Giorno
Used for AF24Giorno.
Coil was easily removed.
View detail
Special Tool for CBR1000RRRSHOWABPFFork Disassembly
Special Tool for InnerCartridge removal of Big pistonFork. 90N tightening, so loosening is Large.
The Torque is tightened by hand and that's it. Why do you tighten it with such a stupidly strong Torque?
View detail
Special Tool during CBR1000RRRSHOWABPFFork disassembly.
Special tool required for removing and installing the top cap. octagonal. View detail
Another long Pin would be perfect.
Normally, I would expect to see a Pin that pushes out the Chain Pin and a longer Pin that pulls out the Chain Pin.
This one comes with only one type of Pin.
Therefore, it is necessary to push out two Pins, remove the Plate, pull it out and push the ThailandPin to the end.
That is a bit of a hassle, but for the price, this is what you get.
However, the fact that the tool is Compact is a Large change Good.
View detail
Required for Exhaust SystemJoint spring
Exhaust SystemJoint spring is a must for installation.
Don't be stingy and have one so you can install it without injury.
Recommendation
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
I don't want it in jc92Clutch.
I don't use it to replace the Clutch on my jc92.
Clutch lock nut is 19mm.
View detail
I can't use it for the slipped Clutch, though.
Cannot be fixed with Clutch that has started to slip.
When loosening the machine, I turned it with Impact.
If it's new and properly assembled, it will hold it firmly in place.
If it's not assembled right, it won't lock, so fix it in place to make sure.
Nut tightening check, I think it's good.
View detail
Genuine Honda Part.
This is the oil slinger flywheel tool called for in the factory manual. It's perfect fit and like every genuine Japanese tool Ive ever used including woodworking, It's flawless. View detail
Best, but not omnipotent.
I became interested in it through a feature article on webike and bought it.
It is significantly better than the common Aluminum Injector, but not completely problem-free.
First of all, it takes time to put it on. The Packing is put through the Cable and the Body is tightened, but the amount of tightening is large and must be turned many times.
When the body is full, the remaining oil leaks out from the slide portion when the body is removed, so curing and dustcloth preparation are essential.
Naturally, it cannot be used with the Cable with Throttle's Guide (the same applies to the conventional product).
I am concerned about the durability of the spiral Cut Packing as it is a special shape and not sold individually.
However, there is nothing better than this in terms of oil feed capacity, and since pressure can be applied at the slide, even hardened old oil can be pushed out at once.
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
Not used for jc92Clutch work
Center nut of jc92 Clutch turns in a box of 19 View detail
easy to use
Easy to use, Inverted Front Fork cannot be done by hand. View detail
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
This makes it easier.
I use it to rub the ROD and it is easy! View detail
ChainMaintenance
I purchased this for ChainMaintenance. View detail
It is also used with Syringe Type and Negative Pressure Breeder.
As the title suggests, it is also used with the Syringe Type and Negative Pressure Breeder.
This is to prevent backflow.
Especially with the syringe Type, reflux is a concern, but in such cases, this is also used in conjunction with the syringe Type.
* Image shows negative pressure Breeder
* Video is from the May 14, 2023 FZr.
View detail