Reviews
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
RZ250Exhaust Gasket was replaced.
The Exhaust SystemOEM Gasket of RZ250 (4L3) is dented from its Material and Oil leaks from the Flange.
It is not reusable and must be replaced after each removal of the exhaust system.
The Gasket of ZES used this time is the Metal gasket of the same etc. as RZ250R that the dimension is the same as NORMAL and can be reused again and again.
The OEM Metal gasket of RZ-R is expensive, and this time I bought this product that the performance of the same etc. can be expected and is cheap.
No problems at all with installation. 。
Performance can only be confirmed by riding a reasonable distance.
I have high hopes for the future.
View detail
Fits: KAWASAKI Z400FX/Z400J, KAWASAKI Z550
Cis tube
I replaced the Silencer because the volume was too small and not enough. The quality of the Silencer is very good.
。
View detail
The exchange from NORMAL to Zestan will be drastic!
I wonder what's going on? I posted an impression of Zestan and it was deleted within a week, what's with the deletion of other people's impressions too?
I'm posting this on the assumption that it will be deleted anyway.
The price is very reasonable (41.800Yen including tax). The price is very reasonable at 41.800 Yen including tax, and it looks good and easy to install. No special carburetor setting is required.
If you don't remove the Tandem Footpeg, it will interfere with the exhaust manifold, and the material of the flange is soft. If it is deformed, you can remove it and tap it with a hammer.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250
RZ250 Chain was converted from 530 to 520.
I used it for Initial ModelRZ.
Chain size of RZ250 is 530.
I purchased Mizuno's 520 Conversion Kit to improve the fee ring for overspecifications.
Because it is a price near double than the thing of Mr. Mizuno, I chose the commodity of Mr. Mizuno this time though the other company is also Releasing it.
When it comes to work, MaintenanceSTAND (Not required for vehicles with Center Stand) and Rear Sprocket removal requires a tool to remove the Large fine-tuned Snap ring.
Also, if your Chain is CrimpType, you will need Chain Tool or Caulking Tool, so you will need some Skill and Tools for DIY work.
Fee Ring will definitely be improved after the replacement.
The only drawback is that it looks like NORMAL at a glance.
I think this is a MATCH product for those who are NORMAL minded.
View detail
Fits: その他
Short Tube volume control
It's quite loud.
It's not an explosion.
It is installed in the Pipe of φ70.
View detail
Fits: YAMAHA RZ250R, YAMAHA RZ350R, YAMAHA RZ250R, YAMAHA RZ350R
1XG and 3HM need to be processed
I bought it to replace the 1XG Cook, I wanted to fill the holes in the Cowl tightly.
It's functional, but it's molded in a pre-1985 29L.
1XG (3HM) It's somewhat off in the Cowl hole.
So I used a sander to scrape off a little bit of the Cook's perimeter (about 1 to 1.5mm).
Now that it's installed, the Cowl is also in a bit of a state of hit.
The Cowl side was also shaved a little inside with Leutor.
If you have the right tools, it only took me about 30 minutes to do it because they are both soft Material.
You need to do it carefully, though, because you can't take it back if you overdo it.
It currently looks perfect with no Limit interference. The texture is a bit of a thing.
Because the body color is Black and this Cook is also Black, I don't care about it so much.
I think it's good because it plugs the holes in Cowl and looks like an OEM.
I'm happy with the fact that I can now turn Cook off properly as well.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS
Chatter sound generation
Chatter sound comes out of the exhaust system at the time of idling after less than 2000km of use.
When I took the Baffle off, I found that the front Flange was moving wobbly with the weld off.
Can you give a guarantee?
I look forward to hearing from you.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
It's made overseas, but the workmanship is good and the price is good.
I am currently assembling the engine, so I don't know how it feels and how durable it is, but I think the workmanship is good.
In addition, I asked my favorite Motorcycle shop to measure the core after I purchased it, but the Crankshaft I purchased was 0.03mm while the Manufacturer standard value was 0.05mm, and the core was under the standard value.
The durability is unknown because I haven't used it yet, but it is attractive to be able to buy it at half the price of OEM.
Also, when doing overhaul, 29L is used for the connecting rod parts and 4L3 for the other parts such as bearing etc.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z750, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1
easy to ride
I think it's an easy Handlebar to ride, although I think you'll have a preference.
The height of the aperture and the low profile make it easy to maneuver the motorcycle and it looks good.
If you're tired of the squeezing Handlebar or the high Handlebar Up Type, I'd recommend it.
View detail
A few exhaust leaks, but overall good.
It is explained that the low speed torque will be gone and it will be a high RPM type, but I don't feel that the low speed torque has been lost. I'm very happy with the sound of the Stainless Steel + 2-stroke engine from the idol after the engine is started to the acceleration.
The only problem is the exhaust leak from the base of Flange and Chamber.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R
in accordance with expectations
The shape is slightly different from OEM parts, but the quality and price are fine.
There is a part that protrudes from the cylinder and was cut and installed.
I've used it for about 500?s, no oil, coolant, exhaust leaks, etc.
It's working fine
View detail
Fits: KAWASAKI ZEPHYR1100
It was a very good product
I thought it had an old car feel to it and I thought it was good The packaging is good and the shop is very good and prompt I had a good shopping experience View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA RZ250R
Cospa good
I used it for the 51l Clutch cover
The size feeling is fine, no leaks etc. so far
I think it's cheap enough to be antsy for this price
Since there is no Instruction Manual etc., you can use the Service Let's look at the manuals etc
View detail
Style is good, but it's too expensive
It was a well-known shop, so it was expensive, but I bought it!
There was no problem with the accuracy of the installation, but there was no problem with the accuracy of the installation point on Tandem stay The welds on the brackets are too shoddy, I'm honestly disappointed!
I think I made a mistake in purchasing it
View detail
It doesn't work …
I bought it for CRcarburetor for Repair
The size doesn't fit and it doesn't fit in place
I tried to force it on, but it just bled through Gasoline
I'm here
Packing should buy OEM products
View detail
Fits: KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1
Cospa best
I have purchased this product every time
It is used for Z1, no exhaust leaks so far, perfect
It's a consumable product, so I think it's the best in terms of both cost and performance
View detail
Fits: Others
It wasn't as quiet as I thought it would be
I think the accuracy of the installation is worth the price
I thought the product itself was a beautiful product for the price
Originally the use was on Short Tube, with Silencer inside
Or rather, it was attached
When I took it off, there was no sound deadening material and it was just Silencer
In comparison, though, it's much quieter in the mid to high RPM range
I think Idling etc. is a little bit of a level to be careful about in a residential area
I'm worried that the car will pass inspection
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Same as above but cheaper than OEM
[Was there anything that disappointed you? Still before use, but the Rubber looks soft and durable
Do you have any wishes or improvements you would like to make for the Manufacturer? Many of the RZ parts are out of print, so I hope they keep making them
[Do you have any products to compare it to? OEM Product, which is still being manufactured but is expensive
Frequently Asked Items
What made you decide to buy? price
How was your experience with it? Expectations
Was the installation difficult? from now on
【Please tell me the installation point and hang】 from now on
[Was the Instruction Manual easy to understand? Not included
[Included Parts:were they on? None
[Others] Mizuno Motors is the savior of the RZ
View detail
Fits: その他
It's gonna be a blast
It's quite a bit better and more explosive
It is inexpensive, and I think it's worth the price
It was a little difficult to get into my exhaust system
I was able to shave off some Baffle
For those of you who like bombast
I think you will be satisfied with the product
View detail
Fits: Others
You can see that Mizuno Motor has made a subtle calculation
I installed this Silencer at the time of Tire exchange I was told that this was the case I don't understand it because I haven't sent it to the inspection, but ^_^^ View detail