Reviews
The appearance became Beauty.
I bought it because my previous Decal was faded and scratched and falling apart, and I didn't have Squeegee ready, just a misting spray and Dryer, which resulted in a lot of air bubbles, but I'm glad because it turned out Beauty from a distance.
The texture of the decal is very good, and the instruction manual is very thorough. The rest is up to the dexterity level and the quantity level.:Pair (for Left and Right) I think it will be done.
View detail
I put it on my BMW G310GS.
Every time I buy a new vehicle, I put a MDF Rim sticker on it.
I chose Delicorol Blue 6mm because the body color of the BMW G310GS I purchased is Kayanite, Blue, Metallic.
1cm width Rim sticker could be attached, but Black border on Rim (Empty White) I decided on a width of 6mm because I thought it would give a more relaxed impression.
It took less than an hour to install, just degrease the rim and sticker with Parts Cleaner and spray a few drops of mild detergent on the rim and sticker, but even with the Guide (sold separately), if the angle is slightly different, the rim will gap from the center, so I had to be careful in positioning it at first. I had to be careful about the positioning at first.
Since the work was done in mid-May, no dryer was used, and it was left to dry naturally for one day.
The result is not perfect, but I am satisfied with the accent on the solid black Wheel.
View detail
Convenient
Very useful for applying Rim tape.
The time required for pasting can be reduced to a Large width, and the tape is finished neatly without gapping.
It is convenient to purchase at the same time as Rim tape.
View detail
Easy to stick!
I think the strength of the Sticker is there.
There are many colors to choose from and it is a Recommendation to One Point.
I was able to put it up without mistakes with Option's Guide.
View detail
Easy to stick
It will be very easy to apply Rim sticker.
The position of the paste is also well defined.
Recommendation
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Wonderful
It finishes beautifully.
Instruction Manual is included so you can work with confidence.
View detail
Beautifully finished.
If you work carefully, you can get a beautiful finish. View detail
Curved surfaces are difficult
The place you are curving will have a bit of hang.
It is easy once you get used to it, and if you work carefully, you can get a beautiful finish.
View detail
Curved surfaces are difficult
Decal is easy to apply, but Fork Guard has a subtle curved surface that makes it difficult.
I managed to get it clean by repeatedly warming it up with a heat gun while removing wrinkles little by little.
The product is of very high quality, and after installation it creates a good atmosphere for Parenthesis.
View detail
easy to stick to
The instruction manual is included in the package, so if you follow the instructions, you will not make any mistakes.
It is a good quality Decal, so it goes on beautifully and lasts a long time.
View detail
One point Fashion
I ordered this product because I wanted Impact, although OEMWheel is Beauty in Red only.
I was able to attach the product to the wall without any installation tools. (It might have been quicker if I had them.)
The Red Wheel stood out at One point as I imagined. I am satisfied.
View detail
I purchased a Repeat.
It was already in use, but we were concerned about some noticeable stains, so we decided to purchase it again for reapplication.
We are attaching an image of the new image immediately after the reattachment.
I have tried other colors in the past, but I still like this one the best. I find the iridescent shadows reflecting the sunlight to be beautiful. Even though multiple colors are used, they are not vulgar and gaudy, and I enjoy the calm shiningly look. I feel that regardless of the season, the beautiful circle of light complements my feet and the body of the car.
Points to keep in mind when reapplying For your information, you may have already known this.
It is difficult to tell from the appearance alone, but when the old rim tape is removed, only the old adhesive is often left on the rim in the form of a tape. If this is not removed cleanly, the tape will stick or tangle in unexpected places when the new tape is applied, which will interfere with the work and make a considerable difference in the finished product. Since this product is a quintessential strong sticker, I pack it with Tissue sprayed with CRC556 to dissolve the adhesive a bit, and then wipe it clean with disinfectant Alcohol. I do not bother to wipe the Dustcloth with a new surface every once in a while. The adhesive can be wiped off cleanly by repeating the wiping process three times. After that, just follow the attached manual.
View detail
easy to stick to
I chose Green to match the color of Vista.
You can choose the width depending on the wheel.
View detail
That would be handy
I can get by without it, but...
That would come in handy
View detail
Ideal for Wheel Refresh
I got a used with HubWheel and refresh it.
After all, Rim was a wounded codfish.
I think it is probably Original because the Rim shape was the same as that of XR250.
The OEMRim has a rounded rimSIDE, so the corners may possibly float. I thought it might float, but I decided to use 13mm because of the large area of scratches.
Rear and RimSIDE were too much trouble even for Straight. Therefore, from the beginning, degreasing, washing, wiping and drying with Parts Cleaner, and direct application with Letstry.
The rounded area of the Rim is crimped by holding it with the fingertips and stroking it.
I think it is probably Large sturdy because it doesn't float right away after 30 minutes.
If it doesn't float away when I check it later, good. If not, I'll do it with a slightly stronger Heat gun.
As expected, the scratches look as if the car window film has failed to release air.
View detail
The workmanship depends on the RimDesign.
I got a used WITH HubWheel, but it was covered in scratches, so I bought it to hide the scratches. Now I can rest assured that I will be able to deal with it as soon as I Puncture it.
The Rim was something like XR400, but I couldn't find any details. The width looks like that.
The Rim shape Guard is different from XR250 and is Flat.
Start of work
Degreased, cleaned, and sprayed with detergent water as per Instruction Manual.
Easy to apply but also easy to shift and position. But it peels off easily. The peeled off part is degreased again with Parts Cleaner, and the detergent water is wiped off and dried.
The rim scratches were a bit bumpy, but it looked beautiful. The scar is now somewhat hidden and the car looks newer.
Fashion always starts from the feet up. It is said that fashion starts from the feet up.
Tools to make your work easier
CenterJack or Center Stand
?Parts cleaner
? Dustcloth or Microfiber Cloth without fluff, or used hand towel without fabric softener
? Soft Squeegee, or wash hands with detergent and clean fingertips without oil.
Installation is recommended before scratches occur.
View detail
good quality (goods)
I put it on my car because I was feeling sad about the undercarriage, and it looks cool and I like it, but it is a GoldWheel so you can't tell unless you look closely. There are cheaper ones, but I chose MDF's because I didn't want the hassle of having to reapply them if they peeled off. View detail
High quality.
We are reupholstering the old ones because they are out of date.
It is very easy to tension and thick, making it very durable.
It can be easily adapted to curved surfaces by heating it with a heat gun.
A detailed Instruction Manual is included in the package.
If you follow the instruction manual, you will not fail.
View detail
My favorite Rim sticker
[How is it used?
This is my favorite product for applying Rim sticker.
It is ideal for attaching as an accent when the design underfoot is lonely.
Was the one you received as per Image?
The product was exactly as shown in the Image. You can check by changing the color on the product selection screen.
Was the installation difficult?
The separately sold Paste Gauge makes it difficult to bend when pasting and allows work to progress.
It's more efficient to have someone to hold the unattached part (because it can rub on the ground and get sand on it).
I think it is better to degrease properly before attaching (especially the rear wheel in the case of Chain).
How was your experience with it?
No signs of use due to dress-up parts. Looks cool!
[Included Parts:were they on?
Spare StickerQuantity:Set of 2pcs.
[Was there anything that disappointed you?
I have no complaints about the product.
Too bad the steps are a bit high.
Comments outside of OthersTemplate
The variety of designs, colors, and sizes is also a good point.
Double-sided tape has strong adhesive strength and is easy to apply.
The instruction manual says to wet the surface with water diluted with neutral detergent before pasting, but it was troublesome, so I just degreased the surface and sprayed water only with a mist before pasting, but no peeling has occurred so far.
The price is a little high, but I think it is worth the price.
View detail
Standard Custom
Since the impression can be changed considerably by putting it on, Recommendation is for those who want to completely change the appearance.
I can easily change the image if I want to change it or if I don't like it.
The Guide (sold separately) makes it easy to apply cleanly.
I found out later that if you work in low temperatures (single digits), it will not stick at all.
Please note that the instruction manual also states that the adhesive strength will decrease when the temperature is low.
View detail