Reviews
The motion purchased together with the silicon spray for lubrication of the clutch wire which is becoming astringent. With it being good, although an injector of this sort hears the opinion that it is hard to use, I regard it as the body which it prob
The motion purchased together with the silicon spray for lubrication of the clutch wire which is becoming astringent.
With it being good, although an injector of this sort hears the opinion that it is hard to use, I regard it as the body which it probably injected the lubricous spray at a stretch, and has flowed backwards.
Although I have also actually done (smile) Little by little, when blowing with SHU and SHU, it is only the 10th time or lubricant came out from the clutch wire opposite side, to such an extent that it did not flow backwards, as it was in other impression.
A motion of a clutch lever is a smooth very after that.
I thought the kana which should just specify how to use a little more intelligibly for a package.
I think that it is a tool which will be helpful if even the right usage is known.
View detail
A securing pin is attached to a rear surface and corresponds to the necessity for a pin thinner than usual. When the holder of the other company could not be used for the honda pure pulley, it read and chose, but the pin thin just like that was helpfu
A securing pin is attached to a rear surface and corresponds to the necessity for a pin thinner than usual.
When the holder of the other company could not be used for the honda pure pulley, it read and chose, but the pin thin just like that was helpful.
The type pressed down from the circumference of a pulley is clearly excelled in rationality (ease of use and stability).
It was able to use also for the clutch cover (it is a hole to a transverse plane).
View detail
This product was purchased for lubrication of a clutch wire, an axel wire, etc. When it uses for the first time, grease is taken out with sufficient vigor too much, and has been made to flow backwards in large quantities. merely -- every [ a small
This product was purchased for lubrication of a clutch wire, an axel wire, etc.
When it uses for the first time, grease is taken out with sufficient vigor too much, and has been made to flow backwards in large quantities.
merely -- every [ a small quantity ] -- if it lubricates carefully, it will go as nice thing ON.
Since it began to have used this product, lubrication of wires became easy.
I think that it is the elegance found useful if cautious even of a back run.
I think that they are goods without loss even if it has one, since a price is also cheap.
View detail
It was used for lubrication of the wires of an africa twin. The smooth has been lubricated with the clutch wire and the chalk wire. However, the end of the tube of the axel wire of return is a nut, cannot insert by a wire injector, and cannot use
It was used for lubrication of the wires of an africa twin.
The smooth has been lubricated with the clutch wire and the chalk wire.
However, the end of the tube of the axel wire of return is a nut, cannot insert by a wire injector, and cannot use it.
Please care about [ that it cannot use and ] a special-shaped wire.
If the accelerator grip part of PS. africa twin is decomposed and a wire is removed, as it is, a wire will be short and will no longer be assembled well.
In order to assemble, it is necessary to pull out a wire, and it is necessary to once remove the wire end of a carburetor portion for that purpose.
The gas tank needed to be removed to do the work.
. .
. .
View detail
4-2 is used for the size of a blind rivet. When maintaining a replace silencer, it decomposes, and it is an indispensable tool when assembling. Or it is an indispensable tool also when making a silencer emblem. On the frame of the lower part o
4-2 is used for the size of a blind rivet.
When maintaining a replace silencer, it decomposes, and it is an indispensable tool when assembling.
Or it is an indispensable tool also when making a silencer emblem.
On the frame of the lower part of the top bridge of W650 and W400, the abbreviation phi3.5mm hole is open beforehand.
They are two abbreviation phi3.5mm about 80 mm-pitch holes to right-hand side.
They are two abbreviation phi3.5mm about 80 mm-pitch holes to left-hand side.
TSU in which rivet conclusion is made there as for the kawasaki pure emblem of a picture!! In this part,
I can think only the hole for attaching a kawasaki pure emblem!! It is a hole of such four right and left!! Since this kawasaki pure emblem is stuck on many of ZRX1200 or reimport vehicles, it is not novel parts.
.
.
If it is stuck on W650, it can acquire a fresh impression!! Incidentally the part number of these kawasaki brand-name parts is #56038-1054.
(A blind rivet can be obtained also for DIY Schopp or a kawasaki original manufacturer's product.) When carrying out plug exchange of W650, how is such customization in passing? It does not take the attachment time of an emblem with 2 minutes by an emblem on either side.
.
.
We are the products most found useful in kijima products.
This hand riveter ? is a good tool though cheap.
The above was introduction of the first team tool which we own.
(^O^)v
View detail
they will be necessaries if maintenance is carried out by itself! user-friendliness in particular is also satisfactory -- it is
they will be necessaries if maintenance is carried out by itself! user-friendliness in particular is also satisfactory -- it is View detail
It is used at the time of brake fluid exchange. The price of merit is cheap above all. Although the tube was shorter, it did not have a problem especially in work. If a pump is pulled with not much sufficient vigor, packing is slippery and wil
It is used at the time of brake fluid exchange.
The price of merit is cheap above all.
Although the tube was shorter, it did not have a problem especially in work.
If a pump is pulled with not much sufficient vigor, packing is slippery and will swing wide.
It is a size exactly good using one hand.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Does it say [ that what is not is a large difference if there is this although purchased for clutch exchange ]? It is indispensable rather. if there is this when specification torque loosens and fastens a large lock nut although it is sad that there a
Does it say [ that what is not is a large difference if there is this although purchased for clutch exchange ]? It is indispensable rather.
if there is this when specification torque loosens and fastens a large lock nut although it is sad that there are few 1 time of use counts -- easily -- it is -- it is recommended.
View detail
It purchased for wire lubrication. If there is this, lubrication can be easily done for a wire. however -- firmly -- an injector -- a bundle lump -- since it will flow backwards if it does not lubricate carefully, cautions are required. A thre
It purchased for wire lubrication.
If there is this, lubrication can be easily done for a wire.
however -- firmly -- an injector -- a bundle lump -- since it will flow backwards if it does not lubricate carefully, cautions are required.
A three stars will estimate from the above point.
View detail
It purchased in order to pour oil into a clutch wire, an axel wire, etc. Since it was cheap, there is no complaint, but you may not be such showy tone. Usage acts as a husband of the wire, and inserts and fastens with an injector. If CRC is po
It purchased in order to pour oil into a clutch wire, an axel wire, etc.
Since it was cheap, there is no complaint, but you may not be such showy tone.
Usage acts as a husband of the wire, and inserts and fastens with an injector.
If CRC is poured in after that, it will go into inside pleasantly.
If this instrument does not exist, it says that lubrication takes time considerably, or the skillful thing for which thing oil is applied is impossible.
Since the clutch wire whose motion was astringent comes to move to a smooth, it is a recommend.
The recommend of lubricating periodically is carried out.
He is lubricating every 500 km.
View detail
It purchased in order to equip with the spring (size, doubleness configuration of smallness) of a center stand. I think that aside from small Ho the tension of the large spring was not odd and it was not able to substitute a driver etc. for it. Al
It purchased in order to equip with the spring (size, doubleness configuration of smallness) of a center stand.
I think that aside from small Ho the tension of the large spring was not odd and it was not able to substitute a driver etc. for it.
Also in order to avoid an unexpected injury, he buys it and it is a disadvantage specialized tool which is not.
View detail
They are necessaries when the vehicle type, especially clutch with which it is necessary to lubricate a wire are a wire type. It is the shin without being thought in lubrication, without using this although there are some leaks in the case of lubricat
They are necessaries when the vehicle type, especially clutch with which it is necessary to lubricate a wire are a wire type.
It is the shin without being thought in lubrication, without using this although there are some leaks in the case of lubrication.
View detail
Although the cable of the inside of a new car is also smooth, if it carries out half a year also, resistance will increase. If maintenance is carried out now periodically, aren't there few wire pieces? the muscular pain of a fingertip, and a clutc
Although the cable of the inside of a new car is also smooth, if it carries out half a year also, resistance will increase.
If maintenance is carried out now periodically, aren't there few wire pieces?
the muscular pain of a fingertip, and a clutch -- I think that an octopus is also lost.
Hey is always termination of maintenance now.
View detail
It is cheap, can use and is large satisfaction. I would like to arrange a pure special tool very much. Since it became a cause of oil leakage, and a cause of a crack by marks even if it carries out an engine rose by a suitable tool, the tool was a
It is cheap, can use and is large satisfaction.
I would like to arrange a pure special tool very much.
Since it became a cause of oil leakage, and a cause of a crack by marks even if it carries out an engine rose by a suitable tool, the tool was arranged.
View detail
At the time of exchange of a brake hose or a caliper, if it is, it is very convenient elegance. Since only necessary minimum should prepare the brake fluid which can be managed approximately with a half and is hygroscopic, time is more profitable than
At the time of exchange of a brake hose or a caliper, if it is, it is very convenient elegance.
Since only necessary minimum should prepare the brake fluid which can be managed approximately with a half and is hygroscopic, time is more profitable than the usual air-bleeding after all.
A recommend is carried out.
View detail
Although inner KSR has passed after manufacture for ten years or more, when it came at hand by medieval times, it was in the state where the trace by which the chain was cleaned is not in sight, but a lube (included garbage ?) is applied to a joint and wh
Although inner KSR has passed after manufacture for ten years or more, when it came at hand by medieval times, it was in the state where the trace by which the chain was cleaned is not in sight, but a lube (included garbage ?) is applied to a joint and which is (getting it blocked).
After applying the pure chain cleaner of a honda, when it did with GOSHIGOSHI with this brush for 1 hour or more, work which may reach the portion of a ring firmly was done.
The power degree could also be simplified single hand, and a degree of freedom is in the range which can be moved rather than the shape of KO, and it was moved easy-to-use by it.
If there is nothing for this work although it will be an accessory although the liquid containing the lube which melted, and garbage hangs down, let's be businesslike.
But it is although KOSOKOSO is schemed [ be / it ] that it should carry out somehow (smile;).
View detail
Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley. If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a loc
Although he thought that he would use for the cygnus X for 08 years and bought it, it hits and has a close game to the feather of a pulley.
If it will arrange if the angle degree is attached to a slight degree, but it does by force, the angle of a lock wrench is missing.
It is the price about mind!
View detail
It purchased in order to lubricate a clutch wire. If it binds tight firmly with two bolts, there is no wire omission, and if the nozzle of a grease spray is firmly put into an opening to the back, it can lubricate certainly, without also carrying out
It purchased in order to lubricate a clutch wire.
If it binds tight firmly with two bolts, there is no wire omission, and if the nozzle of a grease spray is firmly put into an opening to the back, it can lubricate certainly, without also carrying out liquid leakage.
Although used for the first time this time, since it can do very simply, maintenance of a wire can be performed by itself after this.
View detail
The rotor puller which I purchased is a direction of the parts number 07933-3950000 of the Kowa energy machine. Since it arrived at hand and the honda brand was attached first, he felt easy. Since the handle is using the pure material which is an
The rotor puller which I purchased is a direction of the parts number 07933-3950000 of the Kowa energy machine.
Since it arrived at hand and the honda brand was attached first, he felt easy.
Since the handle is using the pure material which is an outside diameter of 10 mm, it is considered that the product here is satisfactory also in reinforcement.
Since a price is also dramatically cheap, it is reasonable.
A rotor screw thread becomes 20 mm* details.
View detail
this is the necessaries of wire maintenance! a price is also cheap -- if it comes out and is with sushi and the thing which is not -- large difference! cheap -- buying it by carrying out, loss is a pear -- it and, [ wire-] it is better to do maintenan
this is the necessaries of wire maintenance! a price is also cheap -- if it comes out and is with sushi and the thing which is not -- large difference! cheap -- buying it by carrying out, loss is a pear -- it and, [ wire-]
it is better to do maintenance periodically -- come out and cut during a run in sushi -- Fearful [ it is sufficient, and ], if it carries out -- terrible, after lubricating -- it becomes light and uncanny -- it can ride pleasantly -- it is a recommend
View detail