Reviews
The zrx400.
The Emblem was also renewed when the Tank was polished.
I heard that cheap ones have dirty white paint inside the Emblem.
This item was a Well product in the RedPackage.
View detail
DAX125Custom
Just StickerTune.
I put it up casually at One point.
I am personally concerned about it.
To those around me, I'm just an idiot.
View detail
DAX125Custom
I tried to Bracket car Tune the inexpensive suspension.
It is a fake OHLINS for everyone to see, but it is only for self-satisfaction.
I would like to have the real thing, but it is too expensive and I have given up.
I am not sure how well the Exhaust System can withstand the heat.
View detail
Wow that's cool
I put it on the side cover to hide scratches, but it looks cool without any monk. It looks a little bit shiny, but I warmed it up with a dryer and was able to apply it to the curved surface beautifully. I will add one more sheet. View detail
Just looks great on the fuel tank of my custom build
About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda decals just looks great on the fuel tank of my custom build and even with the bike spending most of it's life out in the sun the pearl red colouring shows no signs of fading. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the decals for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the decals to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two decals that are of a good size and great quality from a well known brand. The pricing of decals similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
For StickerFor re-covering
I bought it for Re-covering because spII's Sticker is reversed in terms of the position of Plug insertion when I try to install it on MONKEY.
Quantity:1 Set of 2pc. so I put it on the back side.
The price is reasonable, so there is no harm in buying it.
View detail
For Dress-up
Type with release paper peeled off and letters left on, used on painted surface. Durability will be checked in the future. View detail
Quite tense when pasting.
[How is it used?
Since the Tank and Seat are in close contact, the longer the ride, the more fine abrasions will appear on the Tank.
I bought this product to prevent that. 2 sizes, LargeSmall, 3 sheets in total, can be shaped with scissors.
How was your experience with it?
It is quite thin in thickness but seems to be resistant to abrasions. After making a paper pattern to make a similar shape to the contact surface, it can be cut along the pattern to make a shape that corresponds to the contact surface. However, while it is easy to cut, this Seat does not seem to be able to protect against sharp objects. Durability is hard to say at this point.
How did it compare to other products?
This is my first time using this type of product.
[Points to note]
I bought the one with luster and carefully applied it to a glossy tank, but it has a few air bubbles, and as noted in the notes, there are wrinkles where there are curved surfaces. It seems that you don't need to worry about it if the shape is simple.
View detail
Good product
The product quality is good. Package is very well done and keeps the product in excellent condition. Fast delivery and received in great condition View detail
Tank has been revived.
I put it on Tank after repainting.
It takes a little hang to paste, but after pasting, the Tank
It was revived.
View detail
They look good side by side.
Transfer Sticker has a hard time when the temperature is low, but it's easy to put it on this season. I have previously used Color:I have purchased Yellow before, so this time I bought White. View detail
![[Monkey 50Th Anniversary Model] Fuel Tank Sticker](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0162/23478064_1_TS.jpg)
A wonderful addition to the sticker collection on my helmet
About quality and texture, I can confirm that the quality is great and that the material used is a metal filmed adhesive with a chrome surface finish. About the feeling of use, An awesomel addition to the sticker collection on my helmet. This is a really special sticker for me as I am a huge fan of the Honda Z50. Products to buy together, Other branded stickers from the likes of Takegawa, Kitaco, G-Craft, NGK and DID would be ideal to add to the cart for some additional detailing since I use many of their parts on my bikes. Difficulty of installation, I can say the fitment of the sticker for my installation was average due to the surface not being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the plastic. Cost performance and comparison with other products, The pricing of this product is great and cheaper then other original stickers offered from the manufacture. You receive a single piece high quality sticker from a well known brand. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Quantity:Pair (for Left and Right) Balance is difficult.
[How is it used?
Used for a dress-up, attached to a Leopard single seat cowl and the sticker dimensions look good.
Was the one you received as per Image?
I thought there was a cutout on the protective seal surface, although it was as shown in the Image.
Was the installation difficult?
Quantity:Pair (for Left and Right) It is difficult to put it on with good balance.
How was your experience with it?
Good for easy dress-up.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
As mentioned above, the LineSticker Seat itself is a transfer type, but there is no cutout on the protective seal surface or the backing paper, and having to cut along the MustacheLine was disappointing.
(Point of installation or hang)
Temporarily fix and paste with good balance.
(Instruction Manual) No
(Caution) Material that may contain both air bubbles and wrinkles if not pasted in one shot.
Opinions and requests to Manufacturer
It would be helpful if the Mount and Protective Seal have a cutout along the Line.
View detail
Large letters are still good for Parenthesis.
After all, the Tank emblem is a Large letter.
I removed the original Emblem and pasted the Large letter Emblem, using Dryer, takoyo and Silicon-off.
It takes some hang to peel off the original emblem, but if you warm it up well, it will come off in no time at all.
It was a little tedious to clean up the seal marks, but the work was worth it and I am satisfied with the good finish of Parenthesis.
View detail
fashion starts with the feet
Buy for dress-up
Strong adhesion and no durability issues.
It is slightly Large and can be Cut.
View detail
Just paste Custom
We have used this product in the past, and its durability is top-notch. If you are applying it for the first time, it may be difficult to get air in, but it is a good idea to decide where to start and apply the first part first, and then let the air out little by little. It is a product that imitates the OEM color, so it fits MD47 perfectly. Some people have applied RALLY 50 OEM decal on the front fender, but I've already applied DirtFreak decal, so I'm not going to do that. View detail
Great quality from a well known brand
About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This Kitaco square sticker is the smallest size in this shape and looks great on the Super Cub leg shield. Products to buy together, Other branded stickers from the likes of Takegawa, NGK and DID would be ideal to add to your cart for some additional detailing since they sell many parts for bikes. Difficulty of installation, I can say the fitment of the sticker for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the plastic. Cost performance and comparison with other products, The pricing of this product is great and similar to what other brands offer. You receive a single stricker that is a handy size and great quality from a well known brand. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Great 60s style Honda sticker for restorations or custom builds
About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda stickers just look great on the fuel tank of my custom build. The detail in these stickers is very impressive and they really helped with the finishing touches of the bike. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the stickers for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the stickers to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two strickers that are of a good size and great quality from a well known brand. The pricing of stickers similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
สติ๊กเกอร์สีสวยสดคุณภาพดี View detail
Would you like a little more transparency after application?
I attached it to Front Fender, but the adhesive surface seems to be a little uneven. I feel that there is some unevenness on the adhesive surface.
I would be happier if the Clear sticker looked a little more clean on the underside.
I would appreciate a texture like KawasakiBrightSticker's, but if you say it is worth the price, I think it is a good enough product.
View detail