Reviews
Lightness is good
It is light and good.
It's a little bulky, but I always stick it in my Side bag, so it doesn't bother me too much.
They're not as intimidating to look at, so they may not be as effective at preventing crime. For now, I'm Guard on the go. I thought I could get the feeling. Because the strength of the Padlock of the attachment is not understood well, it may be good if the person who is worried buys it separately.
Because it is light and convenient to carry around, I think that it is better to use it with other security goods.
View detail
![EDR α Series GPS Driving Recorder For Motorcycles [Drrorecorder].](https://global.webike-cdn.net/photo/impression/64/6454a1e48ebd49f5c1423b537fb67dd4L.jpg)
Fits: Others
well-preparedness means no worries
I'm scared of the public road environment, which seems to be getting worse every year, and I'm introducing it along with Return after 9 years.
The Baron Red, TDK, and Aioi co-developed Drarecorder seemed to be convenient, and it was lost, but since the wage is high, it is here.
I purchased the following for installation
OEM ActionCamMount Compatible Adapter
Base mount for REC Mount REC-B28 (M6) Bolt
Emon Terminal set
NITOMS Acetate Cloth Adhesive Tape
The FrontCamera had a screw hole in the UnderBlanket at first, so I put it there.
I reconsidered and moved it to the front cowl stay because it had a wide angle of 162 degrees and the Cowl was cutting the angle of view.
Because there was not the place where RearCamera could be installed elsewhere, it pasted it on the Fender upper part.
It's right under the tail lamp, so I checked the video at night and it didn't affect it.
The position adjustment is also marked on CameraRear, so if you can see it, I think it's pretty easy!
I checked it with my phone, and it works just fine.
GPS is attached to Cowl Bracket and Switch is attached to Top Bridge.
The power supply is direct battery connection and ACC power supply.
The latter is also wired from the Tail lamp due to its installation location.
SS900 (01) The yellow line in the service manual is the power supply.
While confirming the power supply, I interrupt it with Emon's WiringConnector!
By the way, this Connector is only crushed by Pliers, so you don't need a special tool and it is convenient!
Body is attached to the side of Seat frame
Wiring is Refreshing between Fender panel and Frame.
Space under the Seat is easy and large, which is not suitable for a Sports Motorcycle.
You can also remove Seat from Battery and just raise Tank.
I'm not going to pay 30,000 over labor for such an easy job...
As for the feeling of use, the image quality is good both in daytime and nighttime.
I was a little concerned about White jumping on sunny days, but I feel like it's a waste of time to use it just for the drive recorder!
However, it is delicate to open the hard waterproof lid every time and take out the SDCard that doesn't come out and use it.
No problem with shaking due to vibration as long as it's attached to a proper place.
View detail
![EDR α Series GPS Driving Recorder For Motorcycles [Drrorecorder].](https://global.webike-cdn.net/photo/impression/15/152af448aabe1bb7a418ebf8cfd91db8L.jpg)
Fits: Others
I'd say Dramalec is a must have!
A little tricky the other day. "Stirring." so I decided to put on a Dramalecorder as a precaution.
It is a DIY Challenge because the installation costs a lot of labor.
I have D-UNIT in for installation, so it's not that hard.
However, it is necessary to process the connection terminal part of Dr-Recorder in order to connect the power line of Dr-Recorder and D-UNIT.
The BlackCable and the BlueCable need to be processed, and I used Electric Works Pliers to bite the Bullet Terminal.
RedCable is used as is, so there is no need to process it.
I connected the Minus wire of the BlackCable to the Minus wire of the D-UNIT, the IG wire of the BlueCable to the Plus wire of the D-UNIT, and the Plus wire of the RedCable to the Plus (bac direct) of the Battery.
If you do a Net search, you can find many ways to connect these areas, so I referred to them.
The Body was installed where the ETC is housed to see if it would be better to have a place that doesn't move.
The Wiring of the front and rear Camera took about 5 hours in all, although I removed the Cowl and took it around. The fact that time is taken in this area is probably the place where the labor charge becomes high. Because it is the work which the amateur does, it is not possible to do beautifully, but I enjoyed it considerably.
I bought a special mounting bracket for the back Camera. In fact, I wanted to put it on the License Plate, but because it was too narrow to fit in the Fender Eliminator, I installed it on the Bracket (Camera Bracket for Mistuba Sankoowa EDR) which I put out from the side of the License Plate. Because Camera was smaller than I thought, I think that I can install it on License Plate, so I will try it when I have time.
After I installed the camera, I thought that the car behind me would keep more distance from the car at traffic lights because it is a deterrent.
The images are quintessentially beautiful. I have to make sure I don't end up using it in an accident, but I'm going to try it next time I'm on social media.
View detail
EDR-21GFrontCamera
I bought a Bracket from Home center and installed EDR-21G FrontCamera with Camera Bracket.
The Bracket was installed by replacing the Bolt that stops the Front cowl.
It's OEM and I was able to install it without any problems.
View detail
If you want it out of the side of the License Plate, this is it!
I bought this for the RearCamera installation on my Mistuba Suncoast EDR21GA.
I chose this one because I have a Fender Eliminator and I wanted to install it next to the License Plate.
It's a bit pricey compared to other companies' products.
The M6 Cap Bolt is too short for the License Plate Base and Reflector, so I had to buy a longer one.
The angle is very flexible and the fit is very good.
After that, in the case of my car model, Fender Eliminator, I have to think about it a little because it is covered by Blinker.
View detail
I like that it's easy to carry around.
I ride a 4mini and one of my concerns is anti-theft.
At home Apartment, you'll have a great sense of security. "Kadena! Pocket 16 Mul-T-Lock Set". To
I'm using it, but it's impossible to carry this thing around in a quicksand.
Here is the product I chose in
If you are on the road and park for a short time, such as lunch or a walk, you can use this to lock the earth.
I think it will be Large sturdy to some extent.
You can carry it easily because you can just wrap it round and round the front basket.
View detail
![EDR α Series [Drrorecorder] Driving Recorder For Motorcycles](https://global.webike-cdn.net/photo/impression/37/379778102bbd0425ac53d11941dd69c8L.jpg)
Fits: Others
For both onboard and offboard use
I've been using GoPro for Onboard for a long time, but when I put the same thing on another Motorcycle, I put it on the CUB because the picture quality seems to be usable with the old GoPro as well.
Because it can record about 8Hr if I make it to 128GB, operation becomes much easier and it is saved.
I was not good at electrical installation, but it went very well.
View detail
Expected
The OEM Plating Horn was rusted out, so I replaced it along with the Lo.
The reason why I chose this is that it was a colored product, not plating, and had the same shape as the OEM. The tone is almost the same as OEM, so it is not suitable for people who want to change the tone.
View detail
For Drum brake vehicles.
Bought this for my CROSSCUB110.
This is a security product, so no pictures of the vehicle installation.
CROSS CUB has Drum brake front and rear, so Disc Lock cannot be used.
But I was thinking that it's too bulky to run with U-shaped lock or chain lock...
I found this product.
Belt made of Gold "Core." It has resilience even if you wind it around and around because it contains
If you have a Rubber Band, you can make it small and store it (see the picture).
It is better to install it around the rear wheel than the front wheel, as it is more effective in preventing crime.
I can now park my bike in the parking lot where I go without worry.
I bought this product and it doesn't come with a Padlock.
rather "No Padlock." I think it is conscientious that the
There is also a Padlock with Alarm that is made by another company.
There's also the Padlock, which is pricey but looks fiercely sturdy.
This would be the perfect lock for a home sub or for a Main on the go.
View detail
DoubleHorned with OEM UCH-201 and this product.
[How is it used?
The HornUCH-201 of the car body Standard Equipment and this product make the DoubleHorn of the tone High and Low.
If you use a bracket that is not included, you can fit this product inside the Shroud and make it waterproof.
Was the installation difficult?
The selection of the bracket for the Other Brand Product and the installation of the HornRelay requires the removal of the Shroud and Cowl, so it becomes a little complicated.
How was your experience with it?
DoubleHorn has become a powerful Horn like a car and shows its power.
[Included Parts:were they on?
One Side Flat Female Terminal Cord is Quantity:It comes with 2pc.
[ITEMS TO BUY TOGETHER
Quantity as Horn1pc.3.5A consumes:2pc. Set consumes 7A, so I added an external HornRelay.
HornRelay harness is the same Manufacturer's Horn harnessQuantity:You can purchase Set SZ-1133 for easy Wiring.
We were quoted and purchased from Webig's quotation system as it was not one of Webig's standard products.
View detail
Light but surprisingly bulky
It's not a PeLePera string, it's still a stiff string.
Chain lock is more than enough to carry around, but for portable use, Brake Lock is better.
View detail
limited to those present at the time of departure
It is designed for use when taking a break on a tour or when away from the motorcycle for short periods of time such as eating.
It is limited to the distance that can be rushed immediately when Alarm is sounded by Prank.
It's not a HomeSecurity lock.
If it is exposed to PRO, it will be destroyed in a second. So, it is only limited to use on the road.
One thing I use at home is being able to keep the Front brake on when I Lift up the Rear.
It is a size feeling, but if it is Kawasakiz1, it is a feeling that it fits in Tool case perfectly.
View detail
![EDR α Series GPS Driving Recorder For Motorcycles [Drrorecorder].](https://global.webike-cdn.net/photo/impression/78/78e8495fe3e76d11239a9937621ece59L.jpg)
Fits: Others
Fallen cannibals
In the case of an accident with a four-wheeled vehicle, it is often "Motorcyclists are worse. I think that there is a tendency to think that it is. After installing this camera, I had a sense of security as if I had a backing in case of emergency. Well, it would be better if the emergency never comes.
Installation was easy with a clear instruction manual.
As for the power supply, I used Flat Type Fuse Power Supply of Emon, and replaced it with Fuse of ACC power supply of Fuse box.
The front and rear camera wiring is quite long, so you need Sense to get around Beauty.
I'm still playing around with using it as a replacement for ActionCam.
I will try to drive safely so as not to be useful.
View detail
Te BearBear Yakon
Compact and does not interfere with the back, and the band is soft and gentle to the object. View detail
![EDR α Series GPS Driving Recorder For Motorcycles [Drrorecorder].](https://img.webike-cdn.net/catalogue/images/91097/gwqa_TS.jpg)
Fits: Others
I don't have a Monitor, but Compact is fine.
I bought it in a store, but I will Impression it.
[How is it used?
This model is large enough to fit under the Tandem seat.
How was your experience with it?
I don't have to worry about theft because I can store it under the Tandem seat because there is no Monitor, but I have to connect my phone to Wi-Fi to watch the recorded video with my phone, but the time until I can watch the video is too long. The best way to watch it quickly is to remove the SDCard from the body and play it on the PC. You can play back the video on your PC, but it's a pain to remove the SDCard.
The picture quality is clean, the LED signals are recorded with the lights on properly, and the Motorcycle is so quiet that shaking is not a problem at all. I have no problems at night or in the Tunnel.
[Points to note]
If you have a Radar detector, you may also suffer from spatial extraneous radio waves from this product.
[ITEMS TO BUY TOGETHER
Camera Bracket for EDR MITSUBA:Mistuba Sankova Item No.:EDR-P05
Camera Bracket for EDR MITSUBA:Mistuba Sankova Item No.:EDR-P04
Dr-Recorder Camera Bracket PLOT:PLOT Item Number:DRS012
Drraco Camera Bracket PLOT:PLOT Item Number:DRS002
Dr-Recorder Camera Bracket PLOT:PLOT Item Number:DRS001
[Opinions and requests to Manufacturer
The unwanted radiation is within the specified value, but it is a problem in practical use.
Keep an eye out for coexistence with Radar receivers.
View detail
That's the strength of OEMOption!
It may seem a bit expensive, but as it is a ManufacturerOEMOption, it is Exactly right for a CameraMount Bracket. View detail
![EDR α Series GPS Driving Recorder For Motorcycles [Drrorecorder].](https://global.webike-cdn.net/photo/impression/2b/2b40466dd2fb1bd05c338355bd71df78L.jpg)
Fits: Others
It's a must to install the front rear2ch drarecorder.
I ride a moped Grom, and whenever I go on a touring trip of around 100K round trip, I always get overtaken twice by unreasonable drivers.
When you are driving with a gap between you and the car in front of you, some cars suddenly move out into the opposite lane of the Right Side and try to pass you.
It's also a lateral Limit.
I've already decided that I need to add a DVR to protect myself, so I installed this product.
FrontCamera is not enough for me, so I looked for a 2CH product and found this product.
I was waiting for the EDR-22G which was supposed to be released this summer, but the other day the Manufacturer's website said that the supply of electronic components was not available and that it would be released around April 2022, so I gave up and went with the EDR-21Gα.
Well, the functionalities are almost the same, so let's call it good.
As for the installation, since I have KITACO's Power Outlet Port Harness, the Power Supply Cable on the Dr-Recorder side needs to be processed by Male's Bullet Terminal.
The Body is installed on the Battery, I cut it off because it interferes with the plastic which receives the documents on the Seat side.
Wiring is unexpectedly long, so I keep it between Tank and Shroud.
Especially the front side, the fine adjustment of the Camera position is super hard. It is recommended to work by two people if possible.
The handheld Switch is placed under the Handlebar and the GPS Antennas are placed on the Front forkStubby.
The work took two hours with one person working.
The recorded image is also very clean and the License Plate can be clearly identified.
I'm sure it will be a great help to me as a soloMain.
View detail
feeling of having done something
I installed it on my ESTRELLA. I didn't like the look of the brackets so I made my own brackets. The sound is low so it's not too loud. View detail
feeling of having done something
I installed it on my ESTRELLA. I didn't like the look of the brackets so I made my own brackets. The sound is low so it's not too loud. View detail
It's just the right size.
The AlphaHorn is a classic European sounding horn that sounds much better than the NORMAL horn, and is not too large or too small, making it easy to install anywhere. View detail