Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Clear all

KITACO

05 Jul 2022

Super Drive Face Type X

Fits: YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA Axis Treat

Japanese Webike user

3/5

Lighter than NORMAL, but...

[How is it used?
I purchased this product to be installed at the same time as the High Prix.

Was the one you received as per Image?
It was just like the image.

Was the installation difficult?
Large may be odd because the drive system requires a special tool.

How was your experience with it?
I have been able to use it without any glitches, but I don't feel it is very effective.

[Included Parts:were they on?
There was nothing in particular

[Was there anything that disappointed you?
The fins are well made, but the large size of the fins is obviously smaller than the NORMAL fins.

▼ This is for installation at the same time as KITACO's Hi-Pre, and should not be installed as an OEM replacement. View detail

CNC Racing

04 Jul 2022

Brake/GEARPedal kit

Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI SuperSport S, DUCATI SuperSport, DUCATI MONSTER 1200S

Japanese Webike user

3/5

This is my second purchase.

[How is it used?
Mainly for Touring use

Was the one you received as per Image?
This is my second purchase and it was as per Image.

Was the installation difficult?
I was told that the FootBrake pedal on the Right was installed by a Dealer when I bought it the first time, and that he used a Special Tool.

How was your experience with it?
There is no particular discomfort.

[Included Parts:were they on?
All necessary items are in place and installed.
There is no pin for rear brake.

[Was there anything that disappointed you?
Nothing in particular

Quantity:Pair (for Left and Right) Quantity even if you only need one of them, since they are only sold in:I would like to see an improvement in the only way to purchase Set.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

CNC Racing

04 Jul 2022

Fixed Gearshift Or Rear Brake Lever Peg

Fits: DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200, DUCATI MULTISTRADA 1260 Enduro, DUCATI MULTISTRADA 1260 S Pikes Peak, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260, DUCATI SUPERSPORT 936 S, DUCATI SUPERSPORT 936, DUCATI SUPERSPORT 950 S, DUCATI SUPERSPORT 950

Japanese Webike user

3/5

I wonder which was better.

I had an embarrassing standing accident for the first time in several years, which deformed the FootBrake pedal and rendered the Rear brake unusable, so I had to buy a second one.
It was strange that the Rear brake pedal had gone due to a standing start, but we had no choice but to replace it.
When making this purchase, I had a hard time deciding between this and Foldable. The difference in price was one thing, but I also thought about what kind of damage it would do to my motorcycle when it was standing up again.
If it was a Foldable, there would have been less damage to the Brake pedal even if it had been standing up like this, but the Clutch cover could have been damaged. Also, Ducati's Rear brake was not effective to begin with, and I was riding in a way that did not depend on the Rear brake.
After thinking about this and that, I ended up purchasing this again. View detail

ETCHING FACTORY

04 Jul 2022

Oil Cooler Guard

Fits: SUZUKI Gixxer SF250

Japanese Webike user

5/5

Strong!!!! Control!!! Cool!!!! Clear!!!!

[How is it used?
Purchased to attach USB fan to Oil cooler to prevent heat leakage

Was the one you received as per Image?
Cheap AGRAS is not shown in the Logo only image as it does not show the overall shape.
High YOSHIMURA is Pass because the Y-shaped hole is not suitable for Screw installation.
It was a process of elimination, but I was able to install the USB fan by simply screwing it in place as shown in the image.

Was the installation difficult?
The installation method was explained in the accompanying Instruction Manual with a picture of NAKED
(The Instruction Manual said to ask the store if you are not confident)

The SF one is similar, but it takes a lot of time and effort since you have to remove a lot of things
I thought I could install it by just removing the Cowl on the Left Side of the vehicle body.
Oil coolerLeft the lower side Screw could not be removed properly, so I decided to remove the UnderCenter cowl as well.
It was engaged with the Cowl on the Right Side (not Pin, but a fixed point with an arrow-like hook).
I ended up with Both Sides all Rose Sis.

If you plan to put all the rose shi on from the beginning, I think it will take less than an hour.
(The Instruction Manual says to ask the store if you are not confident)

How was your experience with it?
The product itself is made of sturdy Stainless Steel and will provide good protection from Small stones and hard insects.
In the case of SF, the silver color of the upper part of the Guard can be seen through the hole below the LeftHandlebar.

I also used it to attach a USB fan to prevent heat leakage.
The cooling effect of this was considerable (100 km extended to 300 km).

[Included Parts:were they on?
Colorful LogoSeal will be included when purchased on webike!

[Was there anything that disappointed you?
No disappointments.

Other items that would be helpful
Installation Point or hang
Oil coolerLeft Screw under the UnderCenter cowl requires a very long Extension to be removed from the gap (I didn't have one, so I had to use the whole Rose).

Availability and clarity of Instruction Manual
Instruction Manual is included printed in color
Screw is clearly illustrated with the color circle Mark.

important point
Stainless SteelUncut? Uncut?
The edges are sharp enough to cut your hand, so be careful how you touch them.

Opinions and requests for Items/Manufacturer that should be purchased together View detail

CNC Racing

04 Jul 2022

Nut for Sprocket

Fits: DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI MONSTER 1200, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R

Japanese Webike user

4/5

Repurchased.

I repurchased the Nut to replace it along with the Sprocket and Chain exchange.
Material:Since it is Aluminum, I decided to replace it because I knew it would get scratched when replacing the Sprocket. It had faded and I think it was just the right choice.
I think I will replace the Nut in the future when I replace the Sprocket, so I rate the cosmetics as low.
It would be good for a small dress-up of the footwear. View detail

CNC Racing

04 Jul 2022

Rear Sprocket Flange Nut

Fits: DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1098, DUCATI 1098R, DUCATI 1098, DUCATI XDiavel, DUCATI XDiavel, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro

Japanese Webike user

4/5

A little dress-up

The rear sprocket, flange, and flange cover had been replaced with CNCRACING ones, but the flange nut was OEM, so the flange nut was replaced as well.
The work was done by a Dealer because I don't have many tools, etc.
Since it is a Flange nut, there is no need to change it unless the Flange is replaced.:Aluminum, so it should be replaced at the time of replacement.
Other products from CNCRACING with Red Anodized paint do not fade mysteriously, but this Nut has been in use for about 6 months and I think it is fading.
It is good for a little dress-up. View detail

AFAM

04 Jul 2022

Front Sprocket (Steel)

Fits: DUCATI Multistrada 1000DS, DUCATI MONSTER S2R1000, DUCATI MONSTER1000, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI MONSTER1100/S, DUCATI MONSTER1100/S, DUCATI HYPERMOTARD821, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD1100/S, DUCATI DIAVEL, DUCATI DIAVEL DARK, DUCATI DIAVEL CROMO, DUCATI DIAVEL CARBON, DUCATI DIAVEL, DUCATI 998S, DUCATI MONSTER S4Rs testastretta, DUCATI 998S, DUCATI 996R

Japanese Webike user

4/5

second-time buyer

The OEM FrontSprocket was only available in 15T and I wanted to replace it with a 14T, so I had to purchase it along with the Rear sprocket and Chain replacement.
Less than two years after the last installation, the car was due for inspection and I took it to the dealer. At that time, the Front Sprocket needed to be replaced, so I asked the dealer to replace it with an OEM Sprocket. (I later regretted that I should have purchased a FrontSprocket and brought it in.) I thought I would be fine with the 15T, but I decided I liked the ride of the 14T better, so I switched.
I considered Sprocket from another company, but decided to purchase it again because I had used it before, although it is a bit expensive.
Durability is Touring (with Winding) I use it and replace it after about 14,000 km. View detail

LighTech

04 Jul 2022

Oil Fuller Cap

Fits: YAMAHA XSR700, YAMAHA MT-10, YAMAHA MT-07, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7

Japanese Webike user

4/5

Ideal for exterior accents

[How is it used?
Used to replace OEM Cap.

Was the one you received as per Image?
It is as shown in the pictures and as per Image. Cutting and Anodized are beautiful.

Was the installation difficult?
Simply remove and replace the OEM Cap.

How was your experience with it?
In other words, it is just a cap, so its functionality is no different from that of the OEM. However, the quality of the aluminum cut-out is higher than that of the OEM plastic, and the appearance of the aluminum cut-out is definitely more luxurious. Also, if necessary, there is a pre-drilled hole for a wire lock, which is also a good feature. The only thing is that the cost is not high. This is for people who are not willing to spend a lot of money on parts to improve the appearance.

[Included Parts:were they on?
None. Therefore, the O-ring must be removed from the OEMCap and attached.

[Was there anything that disappointed you?
None in particular

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer

As mentioned in the "Included Parts:" section, the O-ring is not included and must be removed from the OEM and attached. In this case, the Material:To avoid damaging the rubber O-ring, it is recommended to use a toothpick instead of a gold toothpick for removal. View detail