Reviews
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1-R/Z1-RII
Reproduct
Electric wiring on older cars should be replaced as much as possible, including the 6V MONKEY/GORILLA Main Harness, Regulator, BatteryLEAD, Blinker harness, and Tail lamp.
You never know when or where a wire might break.
View detail
Add Cable for car body
Because it is OEM Product, it is safe. It is convenient because it can be used for two units with this. View detail
Quality is good!
Reason for purchase
◎I bought it for the convenience of multiple Battery charging/storage (I thought I did).
Current state
I wasn't feeling any particular problems with the 0SHORAIBattery (LFX14L2-BS12).
I'm planning to buy the same model number additionally, and I'm going to buy a dedicated Charger (SHO-BMS01-JP) and
It is the state that the special Charger Cable kit (SHO-BMSCBL12) is prepared.
01 Battery charger/tender (SHO-BMS01-JP) You will be able to manage multiple vehicles easily with I misunderstood that I can manage multiple batteries with one Charger at the same time.
connection
I didn't dare to try to connect the Cable kit because the same Connector is in the Include Parts:of the 0Charger.
It is in new unopened condition and has not been checked for connection.
Effects
0SHORAI JAPANSite, I read the description of SHO-BMSCBL12 and bought it, but
It was different from the original purpose due to lack of understanding.
If the 0Cable is broken or the Socket part is damaged or lost, it can be used as a replacement part.
Reflections
0The next time I buy a product, I will read the description fully and understand it before I buy it.
View detail
Battery side is Female. This Cable is also Female.
It buys in order to charge ZX25R which was increased with BC BatteryControllerJunior which is used for mv AGUSTAF3.
But the BCBattery Coupler that we have Female. (Plug-in side)
And the Cable I bought. Female. (Plug-in side)
In the image "Male. But this was just a Cover and not for conversion.
Is this bad BCBatteryControllerJunior that I use?
Because it was not possible to use it with my BCBatteryControllerJunior though I do not understand whether Cable is bad, Coupler which I had in reserve for AGUSTA (Same as BCBattery's Coupler) I bought the Cable side from "Male. I processed it to
It was a complete waste of time because it was no different than making your own charging Cable.
I will raise the image of my BCBatteryController.
Reference.
View detail
Fits: その他 All gasoline-powered motorcycles and gasoline-powered four-wheeled vehicles
Torque up from medium speed
PPS has been in use for about 20 years. So far Quantity:I bought 5pcs. and have been using them every time I replaced my motorcycle. This time, I bought the Top advantage along with the increase of BANDIT250. The torque is increased from the mid RPM range, and the drop in power immediately after starting is also covered. In the car history, CUB110 did not feel the effect so much, but there was enough effect in others. It is the best if it is a little cheaper. View detail
I appreciate that you can only purchase Grip.
I stepped on the tip of the Grip that came with the Automatic craft Trickle Charger and broke it, so I bought a new Grip only.
The Grip that comes with the ChargerBody is shaped like the tip of thin Pliers, but this product has a large opening and is shaped to hold the entire Battery terminal firmly in its mouth, so there is no worry that the Grip will come off during charging.
Because of the strong clamping force, it takes a little force to open the Grip to get the terminal in your mouth.
If you are not confident in your grip strength, you may need to use both hands to open the Grip.
In addition, the part that connects the Grip and ChargerBody is only to insert the Connector, so no special work is required.
View detail
Fits: その他 All gasoline-powered motorcycles and gasoline-powered four-wheeled vehicles
Hmm
I used it on my SEROW250.
I added it on while using the Tadao Exhaust pipe and Beams, but I didn't experience any difference.
It's easy to install, but it may not be a good cosmetic solution. It may depend on the compatibility.
View detail
Battery Maintenance in a Nutshell
It is necessary to remove the Fuel Tank for the access to the Battery of ZZR1100D which will be the second model. You can easily replenish the battery by connecting this charging cord and putting the coupler under the seat. It is recommended for a person who does not ride frequently. View detail
Fits: その他 All gasoline-powered motorcycles and gasoline-powered four-wheeled vehicles
Believe me, and it will be given to you.
Universal's Spark Enhancement Parts, often referred to as "occult" or something like that, but this sort of thing probably only works on older cars.
Especially if you are running Carburetor Vehicles, you will benefit from the improved fuel economy. If the intake and exhaust systems have been modified, it will be even better.
The problem is that they are graded according to the RPM range.
If you use it for everyday use and the RPMs are low, it is predictable that it will be wasted if you use it for low-speed torque because it won't have time to accumulate in the condenser. If you want to use it for overtaking acceleration or pickup on the highway, it is better to choose the high speed type.
I chose the Super torque because I wanted to use it on my moped and I wanted to use the regular RPMs to aid in the fineness of the starting acceleration at higher RPMs.
The changes we have experienced with the Windshield IRIDIUM upgrade are nothing short of breathtaking.
Still, the effect on the fuel economy is obvious, improvement in starting in cold weather, and Idling is unstable in the summer if it is overheated. I'm hoping that if I mastered jetting, the driving will change.
Also, they should be commended for the effort they put into designing the Compactness.
View detail
![[Repair] Motorcycle Wiring Kit](https://global.webike-cdn.net/photo/impression/1b/1b4e22235b903789fedba1ee1c233d4fL.jpg)
The dedicated Harness made it easier.
I used to manage the battery of WR250X by removing the side cover and doing CHARGE with Clip, but it became a hassle and I decided to buy it.
To install, remove the Seat and lift up the Tank and connect it to the Battery by the Route which is installed around the Handlebar.
Now you can manage the battery easily with the Large change.
View detail
![[Repair] Motorcycle Wiring Kit](https://global.webike-cdn.net/photo/impression/d5/d5b2cc724de7fc0a8462ab8e5227d0ceL.jpg)
Good quality, reliability, Large satisfied.
I bought it to manage the battery of Z900RS cafe.
It is not easy to install because WiringSpace under Seat is difficult, but if Route is decided, if Wiring of + and - is connected to Battery, it is completion.
The batteryCHARGE works fine.
View detail
Huh?
Buy to use with Fully Automatic 12V Motorcycle Battery Charger! If you attach this to the Battery of Both Sides of the car, you can charge the battery without removing it every time, so buy it!
… but it came with the Fully Automatic 12V Motorcycle Battery Charger. I didn't realize it and bought an additional one …
View detail
Essential Items to turn into Erie
Smaller than OEMBattery, these items are essential to fill up the battery space.
You may be able to substitute something else, but it's inexpensive and I think it's a good idea to buy it.
The size can be easily cut and adjusted by Sponge for flexible use.
By the way, three cards were enough to fill the S1000RR's BatterySpace.
View detail
It's just a Spacer, but it has an itch.
MT-09SP with HY-93C, so I bought Spacer.
I chose Spacer because I wanted to have a full range of brands here.
It is a thin spacer, but it is easy to cut, and the thickness can be adjusted freely, so it is a good spacer. It's more of a Recommendation than a certain Block type Spacer!
Obviously, it's not three centimeters high! The block type is Recommendation, but this product has a fine adjustment It's easy to do, so it's a Recommendation!
View detail
SHORAI Exclusive Charger Cable Kit (for 12V Battery)
This review is for the SHORAI Exclusive Charger Cable Kit (for 12V Battery). I used this cable kit with the Shorai Lithium Iron battery I installed in my 2016 Yamaha R3. The kit is great, all the ends are labeled as to where they go and it’s nearly impossible to plug anything in backwards. If you’re interested in the weight savings and additional power that lithium batteries offer, this kit is for you. View detail
SHORAI Dust Proof & Drip Proof Connector for Exclusive Charger Cable Kit
This review is for the SHORAI Dust Proof & Drip Proof Connector for Exclusive Charger Cable Kit. The packaging for this item was great and it appears to be a genuine Shorai item. I bought this for the charging line on my Shorai battery which originally came with a dust cover, but recently broke off - a very common problem. The fix is very easy though, just a few Phillips head screws and the project is complete. View detail
Main's PPS auxiliary
PPSMini racing was installed on SUPER CUB 110PRO to improve the problem of the electric system, but I felt the power down momentarily at middle speed rotation so I purchased PPS BOOSTER and worn it. It improved considerably. Although the problem has not completely disappeared, since it is Level which is not worrisome almost, you can spin and play. ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, View detail
Is there a more effective vehicle than a car with a problem in the electric system than a good condition vehicle?
I attached it to overwhelming SUPER CUB 110. Octopus, oil temperature Meter addition, SUPERIgnition, Double Head Light, Others Oppression of electrical equipment too much sometimes caused throttle to be completely closed for a moment when Throttle was fully opened. At the time of departure, when I opened Axel, there was a phenomenon that it blew up after a moment like a breath. The most troublesome thing is that it will be like a full slip for a moment when the Slot fully opens at Corner exit with Corner pushing in high revs and engine braking will work and it will likely fall. (Especially loose climbing slope) After suffering, PPS's RACINGMINI (For high speed rotation) If you purchase and install it, it resolves it. However, as the phenomenon appears a bit at medium speed rotation, add a PPS booster
I'm thinking of installing it..
View detail
![[Repair] Motorcycle Wiring Kit](https://global.webike-cdn.net/photo/impression/36/36698fd6eba4318c8d50d03d5a2a1e0dL.jpg)
Extremely convenient
Battery mounted on DJEBEL 250 XC with much rise.
I used Yamaha's Charger and I bought Repair Parts for attaching to multiple vehicles although it comes with WaterproofSocket.
DJEBEL of discharge-sickness sickness also needs to remove Cover which stops Screw to charge Battery, and charging is troublesome.
I installed this product next to the Helmet holder and made it possible to charge Battery without removing Covers.
A little It is possible to charge without a tool even when charging.
Just because the price is high from the product ?? Installation is easy and Wiring is affordable Length But for price - - - It is a bottle of water..
It is a Recommendation for Jebe Owner as it's super convenient
View detail
Fits: その他 All gasoline-powered motorcycles and gasoline-powered four-wheeled vehicles
I can not feel it yet
I thought I wanted to install myself while watching the Impression of the other person, and I attached BOOSTERKit together. Although I got excited with excitement, I did not understand much about the effect.
I had never experienced TorqueUP by another person, so I guess it depends on the car model. But this time it was Body ground instead of Earth with Engine Cover recommended by Manufacturer, so I'd like to change the Earth location and feel it this time.
Installation is easy if there is a place to install PPS Body.
View detail