Reviews
Fits: SUZUKI GSX-R1000, SUZUKI GSXR750, SUZUKI GSXR600
High cost performance
I tried the cheap CHINA
I've been looking for a new one because of its accuracy and texture
I am satisfied with the quality and accuracy of the product, which is beyond the price!
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR750, SUZUKI GSXR600
High cost performance than expected
I installed it on the GSX-R1000 K1
It's an old motorcycle now, and it took me a while to find one bracket
I was struggling with it So I had no choice but to go for a very cheap Chinese one
I used to order it from overseas
But, as you can see, strength and precision
And I found this here
The accuracy is Exactly, and the rigidity seems to be no stronger than it has been in the past
The look and feel of Parenthesis has improved and Large is satisfied
View detail
Installation of Right Side was quite Large strange...
Fallen cannibals... After delivering car carelessly I got stuck on Left 3 times and got scratches on the under cowl...
Quantity with bolt on : Pair (for Left and Right) The subframe mounting bolts are pulled out and mounted, but it is quite Large strangles to hold the self-nuts on the Reverse side. Especially the hose of the radiator is in close contact with the subframe, especially the Right Side, and the tool was difficult to enter is (^_^;)
(I removed the mounting screw and shifted the under cowl, I fixed the nut with the Small Monkey but I think that it is easier to exchange the Left Side if you prepared a 14 mm plate spanner)
The appearance is not exactly how it jumps out, it is natural that you do not know that it is worn if you do not look good.
Perhaps, I think the damage to the cowl is difficult because the slider is grounded even if it falls over.
(On the other hand, if you fall down severely, the attachment part of the subframe and the frame will be useless)
View detail
Fits: MOTO MORINI Granpasso 1200, MOTO MORINI Corsaro 1200
I returned it.
Because it was far too far from the product image
I returned it.
Among Net products, it is said that there are things that are not the same thing as images because they are using images
This was a thing that I could return, but when I can not do it
Since it is described in the product page the reasoning is so self-responsible
View detail
One of the Best Mechanical Switches Out
There's only a couple of mechanical switches out for the non-RCS Brembo radial master cylinders and this one checks all the boxes: 1. Looks good ☒ 2. Works well ☒ 3. Affordable ☒ Installation is pretty straight forward, hardest part was the trial-and-error related to which wire goes to the switch to work with the OEM harness. I would recommend this switch to anyone looking for a proper mechanical switch. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR750, SUZUKI GSXR600
Is good
It is quite good for the price, I installed it in the GSXR-1000K4. This is enough because it does not ride for 2 people, Buffing is also hung and it looks pretty, the mounting hole is also Exactly, Recommendation. View detail
brembo bracket kit
I have been miss lead this item does not include calliper and the price charged is absolutely ridiculous ! a bracket essentially for inc import duties £345 never again when I looked at item again although there is a picture of calliper with bracket kit very miss-leading be careful View detail
A little value is stretched but I think that I bought good shopping.
In Normal muffler, the place where Chain passes is crushed, it was a disappointing part at a glance. I just could not stand it and bought it. Since I installed it myself and was a good product with high accuracy of work, if there is a SmallExtension in Ratchet's Large, the work will proceed comfortably. Also, since the clearance between the Exhaust System and Chain's escape is large, the tension of Chain is free, so it will be a particularly recommended part. Volume is deck because it is with for Race, but with End Baffle and KIJIMA Inner silencer 41 pie, I was able to pass the vehicle inspection this time. View detail
Fits: KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX636, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Decorative elements are strong
I did not want to process Cowl so much, so I made it to MINI. Cowl fixing Bolt is easy to install and remove. But it will change looks and change. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z1000 ZZR1400, KAWASAKI ZX-9R, KAWASAKI ZRX1100
The decorative element is strong
Just screwing into the boss at the rear end of Swingarm, pretty much Race ish. I bought Frame slider at the same time, but VinylPipe is rolled into Screw and politeness is transmitted. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z1000 ZZR1400, KAWASAKI ZX-9R, KAWASAKI ZRX1100
The decorative element is strong
Easy to install, just screw. However, Race ish, it seems quite satisfying. I also like making it solid.. If it is a bit cheaper to say,. View detail
Sp2 ladybirds gp
Ok so Iam going to start with how happy Iam with my purchase, shipping to my from Japan only took 3 days. This is my 3rd set of ladybirds they are piece of art and amazing sounding system with high quality. They were a lot cheaper than other sites I have seen and actually came with silencers with i will not use but good to have. Overall I would highly recommend webikejapan because of their price and the speed of shipping View detail
Very common
I want the Rubber roll of Exhaust Spring, I ordered it because it was here that I came out on the top with inventory instant delivery and it is wearing it.
It is a product that has nothing to impress, but it is not bad, it can be Recommendation.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Frankly Parenthesis is nice !!
Attached to ZrX 1100.
I purchased it because I wanted to Refreshing around Rear.
I think that it is a feeling that there is no personality in a common Bracket, I like this shape and it is purchase.
Although I did not have much difficulty in installation, the work went smoothly, but as it is, the Exhaust System and Shock interfere with each other, so I added Rubber Bush between and attached it.
It looks refreshing and I'm satisfied to see Rear shock well.
View detail
To work well
I used it when I made the SR into a Rear disk. Comparison is difficult because NORMAL is Drum, but it works well anyway. However, when Brake's soup arrives around the Caliper, there is also a small negative part that it is hard to get in during painting View detail
I purchased it as a spare part (^o^)
Fortunately, Body is safe without failing to fall after purchasing, and it fully fulfills its function as an amulet. (^o^)
Just to be sure, I bought Slider Cap as a spare part as I got it.
It was cheap and priced as well as handled by webike, so it was easy to obtain and saved.
It will be appreciated if you can act as amulet as it is. (^_^;)
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
If you mention the type of Exhaust System, one item without complaint.
I bought this Bracket because I took Rear m footpeg for better appearance.
It was Bracket more than I thought.
Bead of welding is beautiful in Large, you can see that you just made it well just by watching this.
The surface finish is also very beautiful.
By the way, the Exhaust System is BESS's Nasato R.
With this Type, Bolt-on does not interfere with Shock. (About 15 mm with room)
Because there is moderate none, I think that absorption of vibration is also good. If there is not a certain degree of bending, stress will build up in the bracket and the possibility that the material will break easily on Aluminum will be higher, so I think that it is a well thought form.
After that, although it is only durability, only this is unknown, since it is not understood if it does not run.
However, things are good.
View detail
Appearance Refreshing Surprisingly sturdy
I was worried about strength by saying Aluminum, but no particular problem.
OEMTandem Footpeg's Exhaust Bracket position and a little gap, but installation can be done without difficulty.
Basically it is satisfactory, but the price is a bit high, so four stars.
View detail
IXILExhaust System
IXILExhaust System's attached Spring broke, so I bought this lady Bird FLEX Exhaust Spring in a hurry.
I can use it without problems.
View detail
Lady Bird Slider Cap
Recently shyly stood up and got stuck, Slider Cap rubbed and broke.
Motorcycle itself was a little scratched in Mirror and SliderBody was intact, so it was nice to wear ~! As it is feeling, Mirror's injury is Touch pan, Slider is Cap replacement and it is satisfactory!. But I have to be careful!
View detail