Reviews
Custom
Recommended for those who do not want to put CALSeal directly on the License Plate! View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA FORCE 155, YAMAHA Majesty S, YAMAHA Majesty S, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
All the OEM Parts you need are included.
It is better than ordering by parts Single Item, because it contains the parts you need. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
CYGNUS-X Taiwan 5th stage is finally fully LED♪
[How is it used?
Touring and mainly city driving, with some night driving.
We had changed OEMTail to Smoked lens, and now the Rear blinker has become LED Blinker with this product.
The front blinkers were previously LEDs, so they were upgraded to front and rear LEDs.
Was the one you received as per Image?
Quantity:Pair (for Left and Right) The two blinkers are also wiring processed, so there is no need to replace the blinker relay when converting LEDs!
Double-sided tape is also included for easy installation.
Was the installation difficult?
In Taiwan 5th period, Tail is LED and Blinker is ValveLamp.
Valve is a member of the [Color] Clear, with OrangeCover attached with Screw, removed and installed.
A single screw in the middle and double-sided tape on the SIDE hold it firmly in place, so it will not rattle due to vibration.
How was your experience with it?
A sharp, LED-specific glow.
The sense of luxury has been improved.
The number of balls also looks good for rearward visibility.
The lens is used with a smoked lens and is clearly visible even in bright light.
I feel that the blinking lights are more vivid, and I feel that safety is improved when using the Blinker or Hazard lamps.
[Included Parts:were they on?
Two screws are provided for fixing.
There is no Instruction Manual, but just remove and install. It is easy to install.
View detail
KN Planning Fuel Hose
I am satisfied that this Size can be used by OEMs without any problems
The 6MM is a little too large for me, so this is the best size for me.
View detail
Fitting is outstanding!
The fitting is good and I am satisfied with Large! View detail
Fits: HONDA Claire's Coupe AF55, HONDA Claire's Coupe AF55
Wrinkle is noticeable.
The entire pull will be Wrinkle. View detail
Fits: HONDA Super DIO, HONDA Super DIO SR, HONDA Super DIOZX, HONDA Super DIO, HONDA XR Baja, HONDA DIO, HONDA DIO SP, HONDA DIO SR, HONDA G-dash, HONDA DJ1-RR, HONDA standup tact, HONDA Tact S, HONDA Johno., HONDA Lead 50, HONDA Joker 50, HONDA Broad 50, HONDA Cabina 50
Is the cast metal workmanship in line with the price?
Although it claims to be for introductory use, it does not come with an Instruction Manualetc.
The object seems to be a Cylinder dug for 49.9cc.
There was also a BALI removal in Cylinder.
The cooling fins? The cooling fin has a crack, or perhaps it did not flow into the mold properly, so I think it is a reasonable product.
On the intake side, etc., where no cutting was done, a powder-like substance fell out when the casting surface was textured and rubbed. Casting sand residue?
Recommendation is to clean it up once and then use it.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
It could be used for OEM Product.
Could be used for OEM; not recommended for vehicles with Power out. View detail
YSS better absorber
About quality and texture: SUPPERB quality absorber than factory About the feeling of use: VERY stable when riding Products to buy together: FOLLOW the preference wrench Difficulty of installation: USE profesional workshop Cost performance and comparison with other products: WORTH money to buy About shipping and packaging: WELL pack good with box Any concerns, cautions, or advice when purchasing: THIS spring bigger than original View detail
with Rubber so it can be used for Seat cover or reupholstery.
[How is it used?
Seat of LITTLE CUB, which was given to us and had been neglected for a long period of time, was exposed to UV rays and had some tears. Let's reupholster it honestly." I wandered around Webike's site and came across this product.
The fabric is thin, but the OEM is also thin, so I have a faint hope that it will last a long time as long as it is kept out of the UV rays in the garage or body coverretc. when not being ridden.
How was your experience with it?
I am very satisfied with the large cover, as it has improved the comfort to the point that it would be rude to compare it to the aging OEMSeat Cover.
How did it compare to other products?
There are some inexpensive Seat Covers on the market, but I could not find a color tone that I liked, and color custom orders were too expensive, so I was wandering around Webike's site when I came across this product. Seat Grips. The stability of the event is irreplaceable.
[Points to note]
In my case, as I mentioned above. Seat cover. The assumption is that it is being used as a For re-covering Seat fabric, not as a
1. To remove the old Seat Cover, remove the Seat from the car body (the Seat can be removed by removing the two Bolts at the tip) and then unscrew the Bracket (Bracket plastic) that is fastened to the base behind the Seat, one by one, in a humble manner.
Remove the old skin and check the damage to Seat's sponge, and correct it if necessary.
3. Put the new Seat Cover on the front and back using a Tucker (a device similar to a large-mesh Stapler).:Pair (for Left and Right) (The front part is difficult to fasten with a standard tucker, so in some cases, a small wooden screw is used to fasten it.)
4. Put it back on the car body and you are done.
Other items that would be helpful
【Included Parts:presence or absence】.
One brief instruction sheet is included in the Seat Fabric Body.
If you are new to this, it may be difficult to understand, so please use each video Site. Motorcycle Seat Replacement Please search in etc.
[ITEMS TO BUY TOGETHER
Slotted screwdrivers and radio pliersetc. are helpful when removing old Seat Covers.
When attaching a new Seat Cover, you will need a Tucker & Staple to proceed with the work itself.
[Opinions and requests to Manufacturer
I would be very happy if there were more color variations, just a typical color pattern would be nice.
View detail
Fits: YAMAHA gear, YAMAHA box, YAMAHA Box, YAMAHA NEWS GEAR, YAMAHA GEAR
Purchased for Yamaha VOX50 maintenance
I bought it to replace all consumable parts including filter and Oiletc. because I got it from an acquaintance. I was able to purchase all the parts at once, so the motor runs smoothly and smoothly. View detail
Purchased for MOTOCOMPO
During the restoration process, I was concerned about the rust on the rear suspension, so I checked outside the company.
It was out of stock at the time, so I used the in-stock notification feature.
I received an email that it would be in stock in a few days, so I ordered it right away, and it arrived and was installed in a few days.
The U-shaped width on the underside of the Shock is a little wide, so it does not fit well for installation.
It's an old vehicle, so I'm afraid I'll have to do as much good as I can to install it.
View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
under the influence of price
I bought it because the price was low.
It is a consumable item, so I am very grateful that you sell it at such a reasonable price.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA DIO system, HONDA GYRO type(2Cycle), YAMAHA MAJESTY125, YAMAHA VINO, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOGZ, YAMAHA JOG Z, YAMAHA JOG90, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA APRIO, YAMAHA AXIS 90, YAMAHA BWS125(BWS), YAMAHA BWS100(BWS)
Beautiful color.
It is ideal for dress-up of GYROX's Rear brake. View detail
![Rear Shock 330mm [HYBRID Series]](https://img.webike-cdn.net/catalogue/14758/cub16-hb-330r_TS.jpg)
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Installed on MONKEY
The oil was leaking from a certain company's rear suspension that I had been using until then, and since I was scheduled to go touring in a few days, I decided to purchase this product because of its price and delivery time.
Can be installed on either MONKEY or CUB with or without the included collar. Damping force can be adjusted with the included special tool.
I think the cosmetics are good and the performance is fine.
I just wish there were several different colors.
View detail
![Address V125 Repair Clutch Shoes [K1-K7]](https://img.webike-cdn.net/catalogue/14762/01301247_510897dc2d50d_TS.jpg)
Can be used without problems.
OEMClutch was replaced to reduce weight.
The cost was low and the product could be used without any difference from OEM products.
View detail
Fits: SUZUKI address V125, SUZUKI address V125
perfectly (suited)
Required for all 200mmRotor installations on OEMCaliper.
The KN planning product was Exactly with good accuracy.
View detail
Is good
The length of the product was EXACTLY the same as KN Planning's exclusive product. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125LIMITED
Braking force Up
Normal caliper also has sufficient braking power.
The larger outer diameter requires a little more ingenuity when installing the caliper.
If you are used to it, it is no problem at all.
View detail
Fits: YAMAHA MR50, YAMAHA GT50 Mini Training, YAMAHA DT50 (air-cooled), YAMAHA MR50, YAMAHA GT50 Mini Training, YAMAHA DT50 (air-cooled)
To Power up
The Engine Displacement VolumeUp definitely increased power, and I liked that it looked the same as NORMAL! View detail