Reviews
SUBFRAME Kit TYPE-2 Stupendo
As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures ------------- --------------------------------------------- As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures Powered by Google Translator View detail
Fits: YAMAHA FZR750R, SUZUKI GSF1200S, SUZUKI GSX1300R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, HONDA CB1300SF, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI GSX-R400R, SUZUKI RGV250Γ, SUZUKI RF900R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GS1200SS, SUZUKI BANDIT400
You can trust me.
I bought it from another Motorcycle and had no problems, so I trusted them. View detail
Required for Master Hose replacement
[How is it used?
Purchased a new Master Cylinder with the replacement of the old one.
The OEMHose is a little short, so if you use an external master like brembo or GALE SPEED, it is not long enough, but if you use an extended VERSIONBolt, you can use it as is somehow, but the angle is a limit, so it could crack and break at any time.
Large front brake, so do not let your guard down!
Was the one you received as per Image?
Usual quality
I don't think there is any other manufacturer that offers this kind of product except Active.
This is a great product, you don't have to replace the entire hose, which saves you money!
Was the installation difficult?
Can be difficult if you're a beginner.
When removing the hose, be careful not to spill the Fluid!
If you put it somewhere, it will discolor or corrode quickly, so please prepare water before proceeding.
How was your experience with it?
as expected (as opposed to expected)
With this, you can change the Hose from MASTER to HOSE at will.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
I don't have it, but if it were a little cheaper...
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR250RR, HONDA MONKEY125, HONDA CL500, HONDA CL250, HONDA GB350S, HONDA GB350, HONDA Super Cub C125, HONDA GROM, HONDA CB250R, HONDA MONKEY125, HONDA CB125R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250R, HONDA CB250F, HONDA CBR400R, HONDA CB250F, HONDA CB400F, HONDA CBR400R, HONDA 400X
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
If you think you're missing something...
Almost done with TW's Restore and put a Number on it.
Hmm I don't know. It's not enough.
No Reflector Sweat
I don't think I'd be caught without it.
tentatively
I feel like I've become cool.
View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Match CB1100 Fork with Initial ModelABS.
[How is it used?
The normal fork of CB1100 except RS has a caliper pitch of 62mm and 80mm. This item is for CB750 (RC42 ) It corresponds to 80mmPitch as well as etc.
The caliper side is compatible with bremboAxialCaliper 40mm.
Was the one you received as per Image?
The product seems to be Active and is working well with no accuracy or quality issues.
Was the installation difficult?
It is a Bolt On, so it is easy to install. In my case, there was a slight interference between the Caliper and the disc mounting Bolt base of the Wheel, but I was able to get it out by shifting it slightly.
How was your experience with it?
Since the Caliper position is at the top compared to the Fork of the 62mmPitch, it can go without the Hose extension. It also looks more natural.
[Included Parts:were they on?
In addition to the Instruction Manual, Bolt and Shim are included.
[Was there anything that disappointed you?
The quality of the product is not particularly problematic, but the high price is disappointing.
The recent price increase due to price revisions has made it even more expensive.
The same manufacturer's support with a 62mm pitch is often available, but the 80mm pitch one here may be special and is not available at all in the second-hand market.
View detail
A must for Brake hose replacement
There are many other inexpensive Copper Washers available as Universal Products, but they are often slightly larger in diameter or of poor quality.
In this respect, the quality of this product is stable and the texture after assembly is very good.
View detail
Wiring
I was looking for a wiring grips for a 120mm length Φ22.2 Handlebar and found this product. I was also interested in the new material Elastomer, which combines the best features of Rubber and Plastic, and decided to purchase it. View detail
Simple and beautiful Forme!
I was looking for a simple and slimmer clutch lever, and I found this one.
I prefer a little more Short lever, but I like the feel.
It feels less thick and the excellent butchering makes it feel lighter.
View detail
Very useful
This is a very convenient product to have when replacing Brake fluid. I think it is worth the price. View detail
It'll be cool!
I installed it for its appearance!
I am satisfied with the style and the large size!
But the removal of the OEMBlinker is Large strange!
I warmed up the rubber part with a dryer and removed it by prying with a slotted screwdriver.
Note that Blinker is also thin and easily broken!
Reflector is sold separately!
View detail
JA55 Left hand Brake for mounting
JA55 Left hand Brake purchased for installation
I was able to install it with no leaks.
View detail
JA55 Left hand Brake for mounting
It was used without any leaks.
The price is for 10 sheets, so you don't have to worry about failure.
View detail
Installed to lower
I had replaced the OEM to EFFEXEZ-FIT Bar, but wanted to go a little lower, so I replaced it with this one.
For Universal, holes need to be drilled. Therefore, position carefully.
The Switch box hits the Tank with the bar squatting, so we installed it with some room to spare. Fingers get caught in the full lock, but it does not interfere with driving.
The OEMClutch Cable was too tight to install because of the angle, so I replaced it with HURRICANE's Guide-less Cable.
Cornering is now more pleasant than before, perhaps because it is easier to apply a front load!
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE
feeling satisfied
The heavy feel of the rear is gone, and the look is more resilient! The slit on the bracket and the ACTIVE stamp on the right side are also good accents.
We had some difficulty in porting Blinker.
View detail
The effect is immensely Large!
I tried to reduce the vibration and numbness by using a Barrel Style Grip with thicker rubber, but it still did not reduce the fine vibration transmitted from the handlebar when running at higher speeds. I'm still having a hard time with this.
The OEM Handlebar originally seems to have Weight, but I bought a vehicle that had already been changed to an external Handlebar.....................so vibration is not a problem.
I found out that adding a Weight inside the Handlebar may improve the situation. I bought this one with high hopes that it would work.
The effect of Handlebar Weight in the first place?
We looked into the following
Handlebar Weight ‥
Pierced Type and Closed End are available.
The weight is placed inside the handlebar.
The use of a Pierced Type→Handlebar Weight to embed a weight in the handlebar to enable vibration reduction. 。 Type combined with additional Bar end weight.
Bar end weight→Bar end weight is a weight attached to the end of the handlebar. As you can see when you remove it, it is a very heavy and sturdy part. 。 The end of the handlebar has the effect of reducing vibration.
Closed End→Handlebar Weight is placed inside the handlebar to reduce vibration.
In case of SR, it is Closed End. OEMHandlebar has Weight as a vibration countermeasure.
Effect of Handlebar Weight ‥
*Only if replaced with an external Handlebar and added Weight.
○ Reduction of hand numbness due to vibration. Prevention of fatigue.
○It is effective for Mirror blurring.
When the vibration of the Handlebar is reduced, the vibration of the Mirror, which is the peripheral parts of the Handlebar, is also reduced and visibility is much improved→ It is effective because the Mirror was shaking slightly when the speed was increased. This is a phenomenon that tends to occur especially with external mirrors.
*If the shaking of Mirror is not eliminated after weighting, I would recommend replacing it with →OEMMirror. Because it is stronger, stiffer and more complete.
○ Effective for equipment around handlebars.
There is no need to worry about equipment attached to the Handlebar loosening from vibration or falling off. Especially nowadays, there are many riders who attach a Camera such as Go Pro to the Handlebar to take videos.
[Notes] ‥
▲Note the width of the car on the vehicle inspection certificate.
If the grip is a closed end grip and a new bar end weight is installed after cutting the grip, the value will change from the vehicle width on the vehicle inspection certificate.
Specifically, for vehicles over 251cc, the width of the vehicle must not exceed ±20mm. If it exceeds the width, the vehicle will not be inspected.
Type of Motorcycle that is easy to obtain the effect]. ‥
Small Engine Displacement Volume Single Cylinder Cars 。 → higher vibration.
Large-sized single-cylinder of Engine Displacement Volume such as 400cc single-cylinder ☆ 400cc single-cylinder
RPMs are rarely high, characterized by Idling to low RPMs and Large vibration. → Higher vibration.
Single-cylinder engines (Small Type to Medium Type) &arrarr; Since the engine is originally a type with a lot of vibration, it is effective.
Exceptions...
*Older 3- and 4-cylinder models of the same year at high RPM. At higher RPM, the vibration becomes finer and the hand becomes numb because the fine vibration is transmitted to the Handlebar.
However, many of the newer cars are now equipped with Balancer to reduce vibration, so I thought this would only apply to older cars.
good point
◎Idling has reduced vibration and eliminated numbness in the hands after disembarkation. 。
◎Mirror is no longer loose, and visibility is improved because Mirror is not shaky!
◎The vibration around the Handlebar has been reduced so that I can attach the Smartphone Holder without worrying about it falling off. I often use my smartphone as a navigation device.
◎Easy installation and no worries after installation due to high precision.
I don't think there is anything bad about it, it is a PARTS to increase comfort.
For vehicles over 251cc, the handlebar width should be carefully selected to ensure that it is large and sturdy, as they are subject to vehicle inspections.
Motorcycle vibration is pleasant at low speeds, but becomes unpleasant as the speed increases. 。 Various positive effects can be obtained simply by adding weight to the inside of the handlebar, so if you are concerned about vibration, regardless of the type of car, please do not hesitate to contact us.
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R1, YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA TRACER900
Yamaha is!
I purchased the YamahaOEM Product because it is not adjustable!
It is sometimes difficult to play in a traffic jam, etc., far away when the hand is small and normal.
The quality is perfect, but I don't like the engraving on the front.
View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Fits front forks with CB1100 ABS of some years.
[How is it used?
I purchased the Fork/Caliper pitch 80mm/40mm to fit an older CB1100 Fork with ABS.
Was the one you received as per Image?
Quality is as high as the Image.
Was the installation difficult?
Basically Bolt On, but if it has ABS, it is better to install in Shop to make it work properly.
How was your experience with it?
It is well made and feels secure. I think it is indeed Active.
Recently, CHINA products have been distributed, but there are some cases where the products cannot be installed due to insufficient accuracy or defective products.
[Included Parts:were they on?
It comes with Bolt and Shim.
[Was there anything that disappointed you?
None in particular. Satisfaction level is high.
▼ CB750 (RC42) It is the same pitch as the Fork of the STD Disc and fits the diameter of the STD Disc.
View detail
Finally, a Handlebar in a shape I like!
It's a personal taste and feeling, but it doesn't look messy from the front in terms of the visual aspect.
I was looking for something that looks almost straight, and the texture is muddy and the color is goldish for Accent.
First of all, there is nothing good in the Gold system!
And yet, DAYTONA HIGHSIDER We are looking for a bar end mirror that can be installed.
I had installed a RIZOMA, but I could not install this DAYTONA bar end mirror (the inside diameter was too small).
I was looking for the next one, but I put the EFFEX EZ-FIT Bar LOW on it,
Unsatisfied with the Positional and Quantity:I tried removing and installing the SetBack, but still no luck.
Quantity of products installed this time:I tried it on without the SetBack, but I had to bend forward a bit to get the extra strength in my arms.
Quantity was determined to be too hard for touring due to the fact that it was already in the:I just put on SetBack.
It was really satisfying to feel like I was really getting into it with Exactly.
I was also able to add a Bar end mirror as desired.
I am satisfied with the ACTIVE Aluminum Handlebar Low type except for the color.
I was told it was ShotGold, but I really wanted it to be closer to Gold.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE
ActiveFender Eliminator Kit for zx10r.
It looks good and is well made.
The License Plate Light conversion coupler is also included, and since all I had to do was change the wiring, even a novice like me was able to replace it.
It would have been better if it had a spec. that could be easily removed and attached in a short time when driving in Circuit.
View detail