Reviews
![KOSO Universal Exhaust Slider [Red]](https://img.webike-cdn.net/catalogue/14762/02060122_511131bfc39a4_TS.jpg)
Protect the Exhaust System from Standing Burnout!
When I was standing by the other day, they properly protected my external Exhaust System and Rear cowl! View detail
Koso was meter red
This time I am going to fix in my car for checking voltage. After long time finally I found the correct size for my suitable place . The real time voltage as a multimeter show up and low voltage/high voltage warning also working perfectly (check it test bench) I'm recommending to who are like to work and update gadgets enthusiasts. View detail
Fits: YAMAHA CYGNUS Griffith, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX125
dress up
The radiator air also looks good and has red points, so it is very good as a dress-up. Installation is also easy. I like the product because it was carefully packaged and arrived without damage ~~ I am very satisfied because the delivery time did not take too long The radiator air inflow looks good, and it has a red point, so it is very good for a dress-up. It is also easy to install~ The product arrived without any damage because of the meticulous packaging of the product. I am very satisfied with the delivery time. View detail
Just tape it on.
Easy to install, fixed marks, good appearance. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF
GunGun suck it up!
Looks and performs no different than the Mukawa, and yet it's a cosmetic!
I ride it to work, so Air cleanerBox is a must for me, and I'm even closer to Commuter Express Spec.!
The installation is very easy, but I'm a pain in the ass, so I took a side and did the access directly with the exterior.
View detail
Lukewarm Commuter Motorcycle Becomes Vibrant and Fun Motorcycle
The Clearance of the Slide Piece is too narrow, so it is better to reduce it a little. Thanks to the light weight roller, the engine will run more energetically and lightly, and the fuel consumption will be reduced by 15% to 20%. View detail
![KOSO Super Slim Style Meter [Voltmeter / Red Display]](https://img.webike-cdn.net/catalogue/14762/11212231_4eca52c78d6e3_TS.jpg)
Used for voltage indication on NSR250R
It is just the right size to fit on the Top Bridge of NSR250R. The voltage is displayed without any problem. The voltage displayed was also accurate. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA BWS125(BWS)
A little bit of style.
I was there from the beginning.
I am disappointed in the lack of motivation when I see OEMs
The design is designed to let the wind in from the front, so it will have some effect.
It is Exactly when you want One point.
View detail
If you want to use Fender Eliminator, you can also use this.
If you are going to use Fender Eliminator, you have to change this as well, otherwise there will be a lot of discomfort.
Rear tire maintenance is also easier.
View detail
More convenient than OEM if you just want to hang it up
Stylish Convenient Hook
It is available in a variety of colors and comes with an aluminum cosmetic plate to make it one point of reference.
View detail
Satisfied with Style
Since it is a Universal Product, it does not Exactly fit the Cowl curve, but I managed to install it.
I like the Style.
View detail
The Screw Pitch of the attached Bolt is …
Stainless Steel Hexagon Bolt (No Nut) is included with four screws by Size, but the Screw Pitch is 1.25 (1.5?) in general. So I had no choice but to buy Bolt+Nut because Nut was not available at the nearby Home center. Other than that, I am very happy with the quality and very satisfied. (I'm not sure if it works when it's stooped over …) I put it on BMSRfor Full Exhaust System. View detail
Fits: YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA VINO125, YAMAHA VINO125
Colors changed.
The gPrint section will soon be scraped off and will no longer be visible, so it is easy to see now that the color has been renewed and changed from Orange to Blue. View detail
KOSO Universal Plug Cap for Honda Monkey 125
About quality and texture - Top quality. Nicely designed rubber spark plug cap with Koso logo. About the feeling of use - Secures firmly and performs without a flaw. Products to buy together - This will complete the installation of your Koso super ignition coil perfectly. Difficulty of installation - I found the install process very simple, twist the plug cap into the ignition coil lead and then secure to your spark plug. Cost performance and comparison with other products - Priced well for a performance plug cap and in the same price range from other brands like NGK and Kitaco but better suited to complete my installation. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - Koso offer a few different angled and coloured plug caps so check them all out here on Webike and match what suits your motorcycle. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
If I change the Exhaust System, this is where I want to put my hands.
I purchased it when I replaced the Exhaust System, and I like the intake efficiency better than the Filter type, and I also like the black air cleaner box and the red one point. Now I wonder how the durability of the sponge part will be. View detail
Fender's choice
Personally, I was looking for items to extend the Rear Fender to prevent splashing on the RearCamera and found this product.
Body is Material:Although it is plastic, the surface of the side part is treated like carbon, which gives it a nice texture because it is not smooth.
With some knowledge of Wiring (about Plus and Minus connections), additional tail lights can be added.
I think that the Fender Eliminator is an item that cannot be introduced to the Fender Eliminator crowd, but for me, it meets the performance I was looking for, and the texture is better than I expected.
View detail
Low mountStop lamp.
Replaced with CYGNUS Glyphus OEMReflector.
It was difficult to examine and extract the Earth, Small, and Brake signals from the vehicle.
Note that the removed OEMReflector was replaced by a License PlateFrame with Reflector.
View detail
![Pro1 Multi Meter [Tachometer / Thermometer]](https://global.webike-cdn.net/photo/impression/9a/9a5e313f6add6021e058c6c61ccdcbbeL.jpg)
I installed it the other day after I had burned out the Engine.
The other day, I installed this Meter to manage Engine RPM and oil temperature, as I had burned out the Engine, probably due to repeated overrev.
Installation is as per Instruction Manual (Translation (enter version here) is included) Plus is powered by 12V with IgnitionOn, and Minus is body grounded. The signal wire was long, so I cut it and adjusted it and wound 10 turns. (My Motorcycle, GORILLA, was Exactly without extending Wiring). I bought the Temperature Sensor separately without checking it carefully, even though this product is described and shown in the picture.
Incidentally, the attached Sensor is KS-MO-TS1828W with Screw Size:1/8 Pitch.
The function is inconvenient because you have to press and hold the Select button for 3 seconds to switch between Tachometer and Thermometer, it would be easier to use if you don't have to press and hold the Select button. It would be very nice if it could return to Tachometer.
But I am very happy with the affordable price and the display is very easy to read.
View detail
Universal, yet the Type 3 Grom doesn't work when pimped.
It was a Type 3 Grom, so it might have been like Title, but it could be a possible problem. By the way, Blinker and Position are separate LEDs. I'm not sure if it's a problem or not, but I'm not sure if it's a problem or not. So I asked the motorcycle shop to copy the wiring diagram and looked at it. First, I used the rectifier.
Countermeasures?
Add a 6ADiode between both BlinkerWiring and ConnectorWiring.
In addition, the position was extended from the license lamp on the rear and connected, and this extension was large. At this time, in consideration of later, I passed two wires for Earth and two wires for Position.:It is a connection with the License Wiring that has been extended from 2pc to 1pc.
Result?
When I started the engine and started the blinker, it flowed, but it was unstable, coming on and off.
Countermeasures?
No more Blinker around. (Inside Headlight) I heard that it is difficult to add diodes to the 3PHarness. So I went to Mr. Takekawa's place and found a 3PHarness for Honda with universal diodes, which was expensive but I bought it. I used this only for BlinkerWiring.
Result?
Naturally? The result was the same as the previous one.
Countermeasure? This is a countermeasure? Implement immediately after
If this happens, I will add a diode to Blinker's Grounding Wire.
This uses the remaining 1 pc from the extension of Position. The connection was treated in the same way as Position.
Result?
I'm not sure if this is a good idea or not, but I think it's a good idea.
operation
WhitePosition, always on
Blinker, the other side of the stream is still lit up.
Blinker position, always on
I think the light intensity is bright. The light intensity is bright.
As for durability, I think the LED is large and durable, but we'll see.
General review
I chose this blinker because the position will be lost when I install the switch assembly with Hazard later. I'm sure the size and construction is solid. The base is rubber type to prevent vibration.
I'm not sure if it's a test or not. I'm not sure if I'd recommend it, but I'm personally satisfied with it. I'm not sure if I'd recommend it, but I'm personally satisfied. (Maybe because it worked fine.)
I also wish there was a Smoked lens in the lineup.
View detail
It's a little dark.
It's cheap. Installation is easy.
It is dark, so it is hard to see in bright time.
At night, it's LED so it's easy to see.
I don't know what the margin of error is, but I think it's better than the OEM about water temperature system.
View detail