Reviews
Poorly made.
My current Helmet Cheek pad is too tight, so I replaced it with the Size XL.
This is for the A-FORCE RS JET, but can also be used for the G-FORCE SS JET.
The Helmet's ShellSize is the same, so all sizes from S to XL can be installed.
The Cheek pad I bought was not well made.
It's supposed to be fixed with 3 Button and Magic tape.
The position of the Button is slightly off (about 2 or 3mm), so I had a hard time fitting the Button.
I made a little wrinkle, and was able to install it somehow, but it is very regrettable though it is Helmet of a domestic manufacturer.
View detail
Sound quality is good. For people who really listen to music and other things wired.
The aim of this product is to buy a compatible Microphone and Quantity:The Set was where you might be able to make line calls through your phone and so on.
As a result, the communication delay and volume did not go up well, and I gave up. As a result, it was not useful.
However, the sound quality is good as the performance of the product Single Body, and the device that Jack can make a difference. (Smartphones and Walkman.) You can enjoy music on the wire if you have
If you don't need a communication device such as Income, and if you prefer wired instead of wireless, I think it's a good buy.
But I'm worried about whether to fix it to the floor or not, because it's hard to handle and you have to take it off from the device when you take off the Helmet. It is difficult to take off the Helmet when I take off the Helmet.
It is important to note that.
View detail
Reasonable sound quality.
The sound quality is good for this size.
I've also used other companies' products and WINS thinner products, but this is a comparison to those.
Of course, the bass is thin and there is no denying the Don CHALY feeling, but I think it is inevitable considering this size and the fact that it is installed in the Helmet.
The not-so-good point is that Wiring seems to be a bit easy to cut.
I actually had to reapply it several times and it was looking pretty dangerous.
View detail
![FF-COMFORT [FF/Comfort] Helmet](https://img.webike-cdn.net/catalogue/images/4044/ffconfort_ph_TS.jpg)
Good for the price, but is the Visor distorted?
The Fit feeling was right in my head.
The wind cutting sound is quite loud. When you open the frontal inlet "Go. And when it closes. "P It's like that. But I didn't understand the Ventilation effect very well. You won't mind if you think it's like this.
The best part? I feel that the side of my vision is distorted.
Individuals, individual differences? There may be such things as the following, but I used it hard for about a year and couldn't stand it, so I bought a new one.
View detail
It can also be used with A-FORCE RS
The product title reads FF-COMFORT but you can also use it for A-FORCE RS
Apparently, WINS is keeping the price down by using Common Parts
It's very easy to obtain and very helpful
View detail
![X-ROAD COMBAT [X/Road Compact] Graphic Helmet](https://global.webike-cdn.net/photo/impression/20/20a3f8149cb96d5657f1d362a2641d20L.jpg)
Excellent Cost performance
I've been buying Helmet from a well-known manufacturer for a while now, but I've been able to get SEROW to I was looking for an OffHelmet for the winter, not a Jet, to ride and I was looking for this I came across the Helmet It has all the features I was looking for, it's parenthesis good and cheap It's not too bad to wear View detail
My skin feels different!
I've been using the ultra-lightweight CarbonHelmet for five years now
I've been using it while washing the interior, but it's time to replace the interior
I bought a Cheek pad from Webike and replaced it, but the surface that touches the skin Material had changed
The color used to be all red, but the parts that have changed are now gray
I was able to put it on with no problems and it felt good when I put it on
It's nice to have a new interior that feels like a brand new Helmet
View detail
Body is Mesh
After purchasing the Wins X-ROAD COMBAT, as others have implied, the jaw I'm wearing a neck warmer I bought a special Chin curtain because it comes in quite a bit
To put it on, just insert the hard resin part at both ends into the inside of the Rubber And the Curtain part was Mesh, as shown in the picture
I wondered if this would make a difference, but surprisingly, I felt less of a breeze
Shield fogging is hard to clear, so anti-fogging measures like fogwins are needed It is
You might want to take it off in the summer
View detail
I bought it as a backup, just in case
At the end of the year, I purchased a WINS X-ROAD COMBAT and used the included Postcard to enter the I received a free Fogwyn Plus
I need to remove the Visor, Shield to install the fogwins, and various Screw is Material for better Visor attachment:Because it has been written that it is weak with Aluminum, it is a spare Repair Parts I ordered it as
I couldn't find the Coin driver, so I ended up turning in a $500 coin, but In the end, I was able to do it without damaging Screw
So I had to keep it as a spare
View detail
![X-ROAD [X/Road] Helmet](https://global.webike-cdn.net/photo/impression/eb/ebce6150528061efdf40733c5eab8a7cL.jpg)
It's cosmetically and visually sufficient
I've been using it for almost a year and I have no complaints
I'm wearing the Income, but there's not much room around the ears, and with the Speaker built in It's a bit oppressive
View detail
![MODIFY X JET [Modify/X] Jet helmet](https://global.webike-cdn.net/photo/impression/f6/f6ec04dddf046f06563228bb695a5097L.jpg)
Look and functionality ○ , The quality is △
It is SHOEI head, but it was the only one in the head of WINS Helmet so I bought it for purchase.
(Other than that, because temple hurts at the moment of attachment)
One year and four months after purchase, the Inner Visor did not move during Touring, and when I confirmed, foam Styrene was detached from the cap and it was Gap.
After returning home it was removed and confirmed that the construction of the glue was complicated and only two points adhered in the area of ??the fingertip.
View detail
Anyway it is light
I used to use the ARAI Jet and it feels much lighter I went to Hokkaido touring for a week with this, and my shoulder rarely hurts I did not At first, I thought the Teak part was too tight, but I got used to it after wearing it many times I did View detail
Decent Audio
Have to try a few times to positioned the speaker directly at ear. Once done, I am able to get decent audio even when Im riding at high speed. Just that it must be directly at your ear. If not, you wouldn't be able to hear much at high speed. View detail
![X-ROAD [X/Road] Helmet](https://img.webike-cdn.net/catalogue/images/13921/mp-02mb_1_TS.jpg)
It is an excellent item for COSPA.
- I first used it for 200KM Touring.
Functionality - - - Ventilation, InnerSun visor, Buckle, - - - I was able to convince enough.
At this price this function is a hit.
I do not want to be that, but I do not know about safety in the unlikely event - - -.
View detail
![FOGWIN [FOGWIN] General-purpose Jet F03](https://img.webike-cdn.net/catalogue/images/15288/wins-japan_4560385767029_1_TS.jpg)
Comparison with PINL ◯ CK
Mounting on YJ-17 ZENITH-P
Originally I used PINL ◯ CKShield as it was used, but as the adhesion strength fell in about a year and a half and gaps became possible in Shield, I tried to replace it, in any case I thought to try FOGWIN
Below, comparison with PINL ◯ CK
【attachment】
PINL ◯ CK is more Pin and its position is determined so you do not have to worry
FOGWIN is a little troublesome to paste alone
I asked my bride to spread the Shield and pasted it
Positioning is not difficult as Template can be applied as a guide, but if you look at workability simply PINL ◯ CK is better
Instead, FOGWIN is free to some extent at the pasting position, so it is better to choose a person with a forward tilt upwards, a person with an upper body awake lower, and so on
Although it seems that it interferes when opening and closing the Shield when attached to the eyes too much, it did not interfere with the part installed at the same height as PINL ◯ CK
【Adhesion strength】
Obviously above PINL ◯ CK (Naturally)
I have not peeled off yet, but it seems quite Large seems to peel off
【Performance - function】
None above or below PINL ◯ CK
Antifogging performance will not change at all
There is information that there is irregular reflection saying, but there is also no difference between PINL ◯ CK and Large
【Summary】
I think that there is no performance difference with PINL ◯ CK at all
Because the price is almost the same, I wonder if you can choose whichever you like
However, since PINL ◯ CK can not be installed unless it is a compatible Shield, people using non-compliant Shields are unnecessary and here
As to how long it will last, I'd like to use it for a while
I'm happy to have 2 Season
Once, that part (Durable) Because I am unknown, I am decreasing one star
There are no dissatisfaction points at the moment
In the coming season, the shield's cloudiness is a problem that can not be neglected in terms of both Stress and safety
If you are using a PINL ◯ CK compliant Shield, we recommend that you install FOGWIN
View detail
Not suitable for Off-Road Helmet?
Helmet attached to wins x-road.
There is no particular inconvenience about installation.
I think it is because it is an off-road helmet, but I hear a lot of noise because of the Wind Cutting sound.
Is it possible to hear without a full face helmet?.
View detail
![X-ROAD [X/Road] Helmet](https://global.webike-cdn.net/photo/impression/b5/b5a33b5325c9188aba63ce70c6043c54L.jpg)
Cost performance OK
Design is unlikely and impossible.
In this price range, I think that I buy Off Hell with Inner Visor because it has only a certain domestic product.
I am glad that I can receive a defogging shield with the attached postcard.
Since I do not have a handle, I am enjoying it for my own simple Simple.
As for Design I liked even if the overall shape was more aggressive shape closer to Off-road.
Since Chin curtain is sold separately, I think that it is good to have Standard Equipment.
View detail
![X-ROAD [X/Road] Helmet](https://global.webike-cdn.net/photo/impression/f0/f0ac5719b8b6aaf0a603b45c70b42334L.jpg)
Cospa high
Design and Equipment (Shield and Inner Shield) , Take Balance of price and safety, purchase for Off. Since the current SG Standard almost conforms to JIS, it is a deciding factor. Is the texture for overseas positives, the texture of the Rubber class is not good. I usually wear SHOEI 's M ~ L, but Ko feels that Pad on his cheek is thick and it is hard for that part. Interior is soft feeling, it is good at all compared with SHOEI about 10 years ago. Painting is not much different from domestic production, somewhat inferior degree. The weight is quite heavy compared to zx - 7. The chin string is not very like a latch type, but when you want to take off quickly, you can leave it as Gloves, so it might be the opposite way. Anyway COSPA thinks good. View detail
![MODIFY X [Modify/X] System helmet](https://img.webike-cdn.net/catalogue/images/21330/modifyx-mb_1_TS.jpg)
Satisfied with weight
I am not tired even if I wear it for a long time.
Currently in use, especially without problems.
I bought XXL, but I feel like I'd be a little bigger.
Use spirit to eliminate eyeglasses on running water.
Although it is System helmet, because of the uneasiness of making opening and closing parts,
I do not know about durability.
View detail
It is suitable for me who has a big head and is not planning to give Speed.
It is a product that is around 61 centimeters above the head, protruding beside the top of the head and a big face and for me.
I also like the place I can do both Jet and Advanced.
A place where the price is cheaper than the two Large Manufacturer in Japan is also good.
I hope I can not try on safety.
I would like other companies to increase the type of XSize XL more.
View detail