Reviews
Z900rs Slider
Cant go wrong with original slider from KAWA, especially the nut size. reason i chose these is due to 2 screw in point, many slider are just cyclinder whereas this are indeed call the real slider which it slides ! View detail
Countermeasures against overturning and breakage
Guard in case of emergency
I wish the base was Black Anodized Aluminum.
View detail
Unobtrusive Slider
Purchased again because I used it on my GSX-S750.
It's a countermeasure against standing up.
View detail
Fitted on a 2023 Honda CBR250RR
It is also available for the 2023 model year.
I am very satisfied with the beautiful finish of the Large size change in Aluminum Cut-out.
Aluminum Collar for installation is attached, but there are two sizes, 10mm and 12mm diameter. 12mm diameter can hide the scratches on the crankcase bolt hole when the OEMBolt is removed, but 10mm diameter can show the scratches a little. However, the 10mm diameter Bolt is slightly scratched.
I would have liked them all to be 12mm diameter colors if possible.
In my case, I inserted a commercially available 12mm Washer so that the scratches would not be visible.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
YOSHIMURA Racing Slider Kit "PRO Shield"
YOSHIMURA Racing Slider Kit PRO Shield Great Choice, a complete match with the lower Engine Yoshimura Pro slider protection covers also, stylish and an excellent piece of engineering, Delivered across the world in 10 days had to pay some taxes but still love my purchase. Thanks Again View detail
MORIWAKI、Skid Pad
The product arrived earlier than expected, which was very helpful. I would like to use your service again. View detail
The Silhouette of Motorcycle is not destroyed but has a certain presence.
■About Installation
Structurally, the Level is not difficult and can be easily performed with tools.
However, since the bolts are on the engine mount side, proper tightening with a torque wrench is essential.
Then I think it would be a good idea to ask at Shop for general work Level.
Reference:Tightening Torque:44.1Nm (4.5kgf-m) *In case of ZEPHYR400X
(I don't have a Torque wrench so I asked for one at the Shop.)
About the effect
I have never fallen down wearing this, so I don't know how effective it is.
The original purpose was to”reduce”trauma Damage to the Engine block in the event of a fall,
Quickly move the vehicle off the road (originally on the Circuit's Course) and out of the travel line,
It is designed to prevent rear-end vehicles from becoming entangled.
About the appearance
The parts themselves are surprisingly large, and have a presence that can be clearly recognized when the driver straddles the vehicle.
However, when viewed as a whole, the vehicle as a whole, the Parenthesis is better with Race ish without destroying the Motorcycle's Silhouette.
View detail
It actually works!
I recently fell over on a Curve on a mountain road, and it is true that when I fell over Shock Absorption/Motorcycle Damage Mitigation I think it was effective for the
---According to the product description, "The patented five-part structure (unlike the one-piece molded type) provides excellent shock absorption and vibration resistance, and the slider part is made of NylonMaterial.:Plastic, enhancing the Slide effect in the event of a fall."---
He said
View detail
Cowl was safe.
[Feeling of use]
As a beginner & short stature with poor footing, I installed it from the time of purchase with the feeling that it was just a spell.
The other day, I finally cocked the car on the Right side while making a small turn at low speed, but when it fell down, the Slider, OEM Exhaust System and Bar End acted as fulcrums to prevent the Cowl from cracking and the Brake pedal from bending, making it impossible to drive the car on its own.
(Mirror has scratches on the edges)
As a side note, the Brake lever was also replaced with a Short Type, so it was safe.
(The hand was also quickly replaced with an external adjustable one for Small Sakura Lever far)
Installation
You should have a Caliperetc. measuring tool ready since you will be using several different lengths of bolt and collars for installation.
Liquid Gasket is not included and requires your own preparation.
A long T-shaped Hexagonal Wrench to attach the DURACON tube to the Base is a sure thing.
Due to the structure of the Engine Cover Bolt and its co-tightening, it is faster to remove the OEMBolt with a power tool.
In addition, the black cowl on the lower side needs to be removed to install the base of the Left Side Slider.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
Installed DAYTONA products every time of transfer
I have purchased this every time. I have had a few minor rollovers on my previous Motorcycle, but only the Slider was scraped and the other parts were only faintly scratched. View detail
good-looking
Completely decorative.
Smaller than the OEMSlider, it is weakly made and cannot protect the body in the event of a fall.
It is good if it is to get a custom feeling by appearance.
View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1100, HONDA CB1100, HONDA CB1100
Good color and gloss.
I am satisfied with the moderate color and gloss, and it does not blend in with the color of the car body. View detail
good-looking
I feel that this is indeed an AELLA product!
Good to make and good to look at.
View detail
I even bought Hexagonal.
Installation is easy, but in the case of RR-R
Tighten the Frame Slider mounting bolt to 64Nm.
If not, it will affect the running of the car. Therefore, we purchased a Long Hexagon socket separately and tightened it with a torque wrench.
View detail
Made by trusted Babyface
Product Name
BABYFACE Babyface Engine slider
Item Number
006-SY028E
Vehicles
MT-09 (Year:2021 Model:8BL-RN69J)
Number of man-hours
About 1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers
Why did you choose this product?
We chose this product because we wanted to anticipate the motorcycle's fall in advance and limit the damage to the smallest possible amount. Also, I thought that Babyface would have a repaired product, so I decided to purchase it. I can fall over with no problem. (I never want to do that, but...). It is a good luck charm.
Was the one you received as per Image?
It was just like the Image. It was not as noticeable as I expected.
Was the installation difficult?
It was hard to tell which part Screw is for. Please refer to the Instruction Manual and work with the screw size and length. If you lick it, it will be Large strange engine rotation.
How was your experience with it?
I hope I won't have to grab it again, and I trust you will protect Engine.
[Included Parts:were they on?
None in particular, Instruction Manual is included.
[Was there anything that disappointed you?
I hope the price is high and the performance is good when you use it. I just wish it was a little cheaper.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
a cane before a fall.
I had a MORIWAKI Skid Pad installed on my ZEPHYR750, and it was effective enough for standing chock,
We immediately installed it on our new XSR as an insurance policy.
The work is not difficult, just make sure to keep Torque control.
View detail
Slider
It did not take much time and the work was completed to our satisfaction.
I love it
View detail
BabyfaceFrame Slider
This was purchased because it would not catch and slide if it did.
Well, I haven't experienced the effect and don't want to, so the effect section of the evaluation is a rating to look at.
I knew the Gold amount was too high and SliderBracket (bar) The SliderBody is attached to the body and a screw is cut on it, so the SliderBody is turned around and attached to the body, and then the screw is used to stop the body from turning around. But when I tightened the screw at any position without tightening the SliderBody to the end, it was loose.
View detail
Genuine R&G Crash Protectors for Yamaha MT07 2017
This was the second part of adding some protection to the MT07 2017 model. I already have the radiator guard from R&G and was very pleased with how it functioned and looked. I was happy that Webike do stock a lot of R&G products for various models and manufacturers. I found the correct part by cross referencing R&G website. The price was about the same as I could get locally but they did not have the stock, Webike did. With a few other parts, all shipped by EMS and arrived undamaged in 5 days. These crash protectors are a sturdy piece of kit. You can see that there is a lot of material to wear away before any damage can be made to your engine or surrounding parts. I personally have had a small low side and the crah protector did their job perfectly. Wirth these added, this is what we are hoping for too. The machining is brilliant, very well presented. The bolts they provide which are of course longer than you remove are stainless steel so will be just fine. A word of warning if you do not already know. Just remove one side at a time or you risk the engine dropping and then you might come into difficulty. If all else fails, I do tend to have a jack under the rngine before I remove or even loosen any bolts for these items. Take your time, make sure you do not cross thread the bolts and you will be just fine. Torque to instructions and off you go. Thanks Webike, very happy. View detail
No need to drill holes in cowl
Largest Merit requires no drilling in cowl
Also, the design is beautiful and doesn't look too different.
I will put it on just in case.
I don't want to try as much as possible to see if it works.
View detail