Reviews
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
SR400 was equipped. Since the sheet was a thing made from a Peyton Place, the die length of a Fender is right just. Since the form of the Fender has shifted a Frame and a little although others are also merely contributed, attachment is quite
SR400 was equipped.
Since the sheet was a thing made from a Peyton Place, the die length of a Fender is right just.
Since the form of the Fender has shifted a Frame and a little although others are also merely contributed, attachment is quite serious.
Although he did his best to the middle, I asked of the store eventually.
Wiring of a Tail lamp is extremely short after
.
I got the store to make an extended Harness also about this affair.
After
.
It equips, although it is a phenomenon in which the Stay which the direction of others has contributed breaks, and as of about three months, it has not been divided yet.
Although
appearance is the highest, it is attached, and it is four stars regarding a Harness.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It attached in order to interfere, if pure since Rear fenders were exchanged. attaches and easy.It is good unlike the thing of other company, to have broken for a while so that it may become not linear form but a car body and parallel.
It attached in order to interfere, if pure since Rear fenders were exchanged. attaches and easy.It is good unlike the thing of
other company, to have broken for a while so that it may become not linear form but a car body and parallel.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
The Blinker was transferred beside the Stainless, and since the great deficit which opened in the pure Headlight stay was disagreeable, the goods here were purchased. Although the direction besides is written, in order that there may be no
The Blinker was transferred beside the Stainless, and since the great deficit which opened in the pure Headlight stay was disagreeable, the goods here were purchased.
Although the direction besides
is written, in order that there may be no instruction manual, the attaching direction of
goods is not known.
Or [ that it is also pleasant to apply a trial-and-error method to an attaching direction by the Headlight which considers ?
if anyhow good, and is used since it is not a portion especially in connection with safety although it is
].
Was it worrisome from it that the Washer used for a Cap bolt was a washer for
plate Screws?
Although then used, although it can equip also with a pure Headlight, since the path of the
Headlight is large, a Headlight stay spreads in - 8 ノ character - a little [
] like a www
photograph.
Although many things were written, the quality of goods is dramatically good truly at Mr. Peyton Place.
View detail
Fits: KAWASAKI W650, KAWASAKI W400, KAWASAKI W650, KAWASAKI W400
This item is for 39mm forks. These clip-on handle bars (or here calls separate handle bars) are made of stainless steel which is my favourite material as it means no rust and it's durable. Well, specifically to this item, that's the only great thing in
This item is for 39mm forks. These clip-on handle bars (or here calls separate handle bars) are made of stainless steel which is my favourite material as it means no rust and it's durable. Well, specifically to this item, that's the only great thing in my opinion. Why I say that, here we go. 1) There is some issue about nuts and bolts (come with the package), when fitting-in the handle bars over the forks and tightening them: - The screwing line of bolt and nut will potentially be cracked and the bolt will potentially be bended. I guess, the bended causes the cracked. - Both upper and lower bolts seem too short thus it potentially causes the screwing line of bolt and nut getting cracked. I can only fix this issue by replacing new bolts and nuts, and extend the length of lower bolt for 5mm but upper one I cannot do anything better. 2) Secondly, the bar length is (too?) short. The length I mentioned does not include the end-cork. I have no idea whether the designer tends to have the end-cork staying attached to the bar and being part of the bar to form the full length or not. I want to just remove the plastic look end-corks and put handle bar stabilizers instead. Well, there is no issue about the installation at all but it can be seen from the picture that all hand switches, lever sets are very close to the forks which means that the handling will be slightly heavier than it should be. 3) I don't quite like the plastic look end-corks. So I, for sure, will have to replace them with machined alloy bar-ends instead. BTW, the riding position is great for cafe racer look but because the bars are very low dropped so don't expect for comfort for long trips. I tried to take pictures to explain what I means. Hopefully my review would be useful. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
[Webike Monitor] After sheet exchange, since it was too large when it was a Club bar of the NORMAL, it purchases. attachment is easy at a Bolt on. It is recommended at those it attaches [ those ] according to a thin sheet, or feels [ t
[Webike Monitor] After
sheet exchange, since it was too large when it was a Club bar of the NORMAL, it purchases.
attachment is easy at a Bolt on.
It is recommended at those it attaches [ those ] according to a thin sheet, or feels [ those ] the circumference of
hips refreshed.
View detail
It changed from the Normal headlight of SR400. Putting wiring into a Case suffered troubles as the Impression besides very much. The one where a back round hole is larger thinks that it is good. type is as expected and it satisfied it very mu
It changed from the Normal headlight of SR400.
Putting wiring into a Case suffered troubles as the Impression besides
very much.
The one where a back round hole is larger thinks that it is good.
type is as expected and it satisfied it very much.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It purchased together with the Case of a Lucas type. Although it was satisfied, in order that type might not have a description of attachment, it ended up the upper and lower sides of attachment not understanding, but trying repeatedly, and was
It purchased together with the Case of a Lucas type.
Although it was satisfied, in order that
type might not have a description of attachment, it ended up the upper and lower sides of
attachment not understanding, but trying repeatedly, and was troublesome.
The affinity with the Case of the
Lucas is GOOD.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Attachment did not start but it ended it as long as 3 minutes. Even if it attaches, he is noticed by nobody, but the circumference of a Handle became tight and it is very much satisfied.
Attachment did not start but it ended it as long as 3 minutes. Even if it attaches, he is noticed by nobody, but the circumference of a Handle became tight and it is very much satisfied. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Whatever it may call it, the curve of manual bending is very pleasing. Although it asked directly the salesclerk of the Peyton Place, those without a difference who worry in which since that is right will regard them as good in a function surface, if
Whatever it may call it, the curve of manual bending is very pleasing.
Although it asked directly the salesclerk of the
Peyton Place, those without a difference who worry in which since that is right will regard them as good in a function surface, if a manual bending Exhaust pipe and a machine-bended Exhaust pipe are chosen by looks.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
It was used for SR400. Since the sheet was changed into the DAYTONA COZY seat, it purchased and attached. Since it is a product made from STAINLESS STEEL, there are no worries about rust and corrosion. When a Center stand was stood for the Mai
It was used for SR400.
Since the
sheet was changed into the DAYTONA COZY seat, it purchased and attached.
Since it is a product made from
STAINLESS STEEL, there are no worries about rust and corrosion.
When a Center stand was stood for the
Maintenance, since it had in no
being conscious, it was felt as the unexpectedly required thing.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The Tank a Back step, Single seat ?, YOSHIMURA ST-1 Cam, and BSA type and Peyton's HALF COWL were supplied. It does not result in completion in Fine tunings, such as air-intake-and-exhaust port polish, now. Especially, Peyton's HALF COWL is too smart and
The Tank a Back step, Single seat ?, YOSHIMURA ST-1 Cam, and BSA type and Peyton's HALF COWL were supplied. It does not result in completion in Fine tunings, such as air-intake-and-exhaust port polish, now. Especially, Peyton's HALF COWL is too smart and completion is pleasure. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Structure is good. There is also texture. They are five stars if cheap 1000 more yen.
Structure is good. There is also texture. They are five stars if cheap 1000 more yen. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since it becomes quite small compared with normal, appearance feels it refreshed. The point needs to keep in mind that fixation of the kana ? meter cable connected also with a weight saving becomes impossible. The impression changed considerably o
Since it becomes quite small compared with normal, appearance feels it refreshed.
The point needs to keep in mind that fixation of the kana ? meter cable connected also with a weight saving becomes impossible.
The impression changed considerably only by changing a front fender.
effective, although it is not cheap -- it came out custom and carried out.
View detail
Fits: HONDA GB250 Clubman, HONDA GB250 Clubman
Although time was taken in removing since the pure muffler which is the tone color style and the muffler satisfying [ both ] which are not inferior to it had adhered to to exhaust although the style tone color of the pure muffler was very pleasing, Si
Although time was taken in removing since the pure muffler which is the tone color style and the muffler satisfying [ both ] which are not inferior to it had adhered to to exhaust although the style tone color of the pure muffler was very pleasing,
Since it is the JMCA correspondence which was able to be attached satisfactorily, special setting is also unnecessary, and it is comfortable.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
The touch attached although time was taken a little in attachment is large satisfaction. It is preeminent also for an effect. A difference comes out by high speed operation.
The touch attached although time was taken a little in attachment is large satisfaction.
It is preeminent also for an effect.
A difference comes out by high speed operation.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
This is recommended although it is Peyton said for durability to have difficulty with goods. It is ordinarily good although it does not necessarily say in particular that it is strong. I thought that the line of the appearance at the time of attac
This is recommended although it is Peyton said for durability to have difficulty with goods.
It is ordinarily good although it does not necessarily say in particular that it is strong.
I thought that the line of the appearance at the time of attaching above all was the most beautiful.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
First, it is the charm which can be purchased with budget prices. Although the attachment itself is easy, power is needed very well.
First, it is the charm which can be purchased with budget prices.
Although the attachment itself is easy, power is needed very well.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since it had already exchanged for the stainless triumph muffler of WM, and a glow was following, and unbalance with a normal exhaust pipe was uncomfortable, it exchanged. As the normal article had the small inside diameter at dual structure, the part
Since it had already exchanged for the stainless triumph muffler of WM, and a glow was following, and unbalance with a normal exhaust pipe was uncomfortable, it exchanged.
As the normal article had the small inside diameter at dual structure, the part and weight of trade in to which wall thickness became thin were light, since the inside diameter became thick, exhaust steam became good and acceleration went up.
Although it exchanged and being run 100 km, it has already become a gold color.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
One article that it will be made still lower becoming low if a separate handle is used. A design is the highest. Surface processing is polite to it unexpectedly, and rust cannot float in it easily. Since a handle becomes really low, the back,
One article that it will be made still lower becoming low if a separate handle is used.
A design is the highest.
Surface processing is polite to it unexpectedly, and rust cannot float in it easily.
Since a handle becomes really low, the back, not to mention the waist, is a hard.
As it is, it is whether preparedness is required.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W400, KAWASAKI W650
Header pipes are well made and fit my W650 with no hassels. I teamed these with Norton type slip on mufflers which also fit well. Mufflers need to be removed to tension chain but side and centre stands can be retatined. Mufflers noisier than stock pipe
Header pipes are well made and fit my W650 with no hassels. I teamed these with Norton type slip on mufflers which also fit well. Mufflers need to be removed to tension chain but side and centre stands can be retatined. Mufflers noisier than stock pipes - I like the sound but they would not be legal if tested, both for emissions and noise. Currently playing with jetting to take advantage of new exaust system and airbox modifications. View detail