Reviews
Under cowl
the undercowl arrived on time, it was easy to install and was a perfect fit to the bike. The picture says it all. see for yourself. View detail
It's hard to install
Cowl was burnt due to interference with the lower part of the vehicle body.
Since it is installed inside the cowl, there is a limit to how much modification can be done, so we gave up on using it.
View detail
The quality is still different.
I have previously purchased a cheaper CHINA Exterior Kit. The quality and texture has improved a lot recently, but there are still some problems with the mold or the finish, such as bali, sagging, and deformed holes.
Poly sports' Exterior Kit has none of these problems. The exterior kit is beautifully finished in all areas and can be installed without any worries at all.
I am not too concerned about weather resistance for Motocrosser use, but what about TRAIL?
The Decal Kit will be applied immediately after installation, but it looks fine in terms of texture.
It is not surprising since the company also undertakes OEM for Manufacturer, but from User's point of view, the price is low and it is very helpful.
The fitment is listed as CRF450RX, but CRF250RX is also common, so it is used as is.
View detail
Don't touch it out of curiosity.
Mounted on NINJA2 Helmet 50RR.
The wall thickness is considerably thinner than that of the OEM, but the stiffness and strength are not hampered by this.
However, I would recommend that only those who are capable of machining Carbon should purchase this product, as there is a hell of heavy machining waiting for some products.
I mean, it's so much more difficult to process than FRP that I can say to anyone, I don't recommend it.
View detail
Poor quality
Shape Design is fine. Paint is rough and muddy, FRP is 5 times rougher than I expected. I would rather buy a more expensive one. I want to return it. I'm not complaining about the color or anything, I just wish they would have at least made the paint smooth. I am sorry. View detail
Design is fine, but ...
We like the design and use AERO Type.
My MONKEY125 is overdriven and travels about 20,000 km per year.
The car is 99% on road, so it is not running in a place with severe vibration, nor is it experiencing abnormal body vibration due to breakdowns, etc.
In fact, this is the third one I have purchased, because after 10,000 km or so, the area around the mounting point is cracking.
1pc. eye near the mounting Quant.:Pair (for Left and Right) The second time, the Right Side crack was quite large when viewed from the front and was repaired once, but as a result, the cracks expanded and became larger and larger.
Therefore, this time RType was purchased as Repair Parts because it is cheaper, and the original AEROScreen was transplanted.
I would like to see a little more durability, because I can't easily cheat on my MONKEY125 with another Bikini cowl, as it has become the identity of my MONKEY125.
I think it would be good for owners who are not over-driven like me, so if you like the design, you may purchase it.
View detail
Absolutely this for 883!
Sorry for Impression now.
After ordering a new Harley 883Iron at the end of the last year, I had a lot of consideration before I took delivery of it in April. The face also looks a bit lacking. After 4 months of research, the best fit was CHIC DESIGN's Bikini cowl, which is as small as possible.
The problem is the price. When I had a used CB1100 with CHIC DESIGN's Bikini cowl on it, I didn't pay any attention to it, but after I sold it. Oh, it came with a really nice one." I was so surprised to find out that I was the first one to do so.
Well, after all, it is not easy to find a good used one, and there are only a few to begin with. So I bought a new Motorcycle and a new Cowl. When I actually installed it, it is still amazing. The construction is very solid. Good things are good. I was very impressed. It will be 3 years soon without any noise. I still like it including Motorcycle.
View detail
Requires ingenuity in installation
As for the installation, it was difficult to install the LowerBracket to the vehicle body.
Also, I have a BEET Taper Handlebar, and I changed the Bracket of the BrakeReserver tank to the Exclusive Bracket that came with it, but it interferes with the Cowl quite a bit without modification.
Light can only be adjusted by removing the Cowl.
View detail
Perfect!
It takes a bit of time because you need to disconnect and remove the headlight but if you follow the instructions, it's not too hard to install! Very nice quality and finish. As for the look, well, it's all a matter of taste but i love it. Here are some photos so you can see what it looks like on the bike. As for the delivery, 5 days from Japan to Australia, amazing. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R
Easy to install
The side cover can be fixed securely and safely. View detail
Processing required
Installation is by a single Screw in front of the OEM Under Cowl and double-sided tape on the SIDE.
ExactlyDouble-sided tape does not feel like it sticks, so I drilled a hole and used Tie Wrap to hold it in place.
It was like we had to do something creative to stop it.
View detail
I've been waiting over 6 months for this...
I am a New Model KATANA rider. 。 Ordered in spring, delivery delayed…. Delay…. Also delayed…. It finally arrived at the end of the year.
Now, assemble it ? But the middle of the three mounting points don't fit together. 。 I managed to attach the Right Side by enlarging the holes in the bracket to the limit, but the Left Side is not attached at all. 。 Bracket is attached to a ton of places. 。 In the end, the Firmly fixed Bracket was scraped off and the Bracket was remade and fixed and finally installed.
I heard from fellow KATANA members that A-TECH products are no good? so I wasn't too surprised.
If I returned the product with an Objection, I did not feel like making an Objection because I thought I would have to wait another year to receive the product again.
Anyway, it seems that A-TECH's Carbon parts have many Objections.
Those who order should be prepared to order.
View detail
For CROSS CUBJA45.
Texture is sufficient
Unlike KITACO products, the letters are not engraved.
Double-sided tape seems somewhat unreliable
View detail
Parenthesis good!
The appearance of Balance was improved and Parenthesis was improved. View detail
No doubt about it!
I had a Carbon tail from another manufacturer, but I couldn't wait until the 24MODELBlueBall was released, so I repurchased it when the BlueBall was released.
Long tail is still good.
I am satisfied with the moderate thickness.
View detail
The product came with scratches.
As per Title, I received a scratched product. 。
The price is quite expensive, but I guess that's what you get from an outside parts company. 。 The installation method is also quite insecure, just drilling holes and screwing them in. 。 So I'm trying to figure out if I can put 3 points on Bolt and Nut, but this is very difficult (especially Quantity).:Pair (for Left and Right) (MF10 is a large strange thing, like if you do this, you can't put that, or if you put that, you can't put this afterwards. 。
I think it looks nice, so it's good for someone who can afford almost 30,000 without worrying about the details.
View detail
Fits: HUSQVARNA FE 250, HUSQVARNA FE 350, HUSQVARNA FE 450, HUSQVARNA FE 501, HUSQVARNA FE 350S, HUSQVARNA FE 450S, HUSQVARNA TE 150i, HUSQVARNA TE 250i, HUSQVARNA TE 300i
Extremely happy,Would recommend
Great kit. impressed on fit and price. Don't know how they pay for material and molds and maintain the price point but the figured it out. I may even get this kit with next new bike and save original plastic Everything came well packaged. Had to use a heat gun and re-shape the rear side panel a lil to get it to fit perfect but as expected for new fenders. Good quality and good finish. I've always had good luck with the fitment from acerbis and the durability is on par with the oem stuff. Have wrecked a few times racing off-road and haven't had any snap or bend. Webike is very fast, perfectly packaged, the only downside is the high shipping costs. I have been shopping with Webike for years without any problems. I recommend it. View detail
Top quality Bikini cowl, excellent design
[How is it used?
I wanted to introduce a Bikini cowl because I travel at high speeds more and I wanted something cool that would not look like other people's. I bought it.
Was the one you received as per Image?
Great product, good quality, sturdy and looks great on my Motorcycle, just like the Image.
Was the installation difficult?
It is easy to install. The instructions are detailed and easy to install.
How was your experience with it?
The quality, design, and windproof performance are all top notch. The paint job is beautiful and the quality is so good that you would not be able to tell that it is an OEM product.
[Included Parts:were they on?
Everything is available.
[Was there anything that disappointed you?
The quality is absolutely fine but a little expensive… but I am still very satisfied with my purchase.
View detail
Used as Oil receiver for Circuit run
I installed it on my Ninja 250SL that I ride for Circuit Racing.
Since it is a dedicated product, it can be basically simply installed, but there may be some interference depending on the exhaust system being used.
I had OEM Exhaust System and YOSHIMURA Slip-on Silencer, but there was a little bit of shaving part.
View detail
I'm glad I bought it
The texture is not rigid or poor and the paint is beautiful. The installation of this product has removed the balance of the tail section, which the OEM thought was too short, and has made it look very cool. View detail