Reviews
J-TRIP is the best!
I thought it was indeed J-TRIP!
I have one from another manufacturer, but it is easy to lift.
The stability after raising is good.
It's not something you replace that often, so there is a slight price difference.
I thought I could close my eyes. If in doubt, I recommend it!!!
View detail
Fits: HONDA MONKEY125, HONDA glom, KAWASAKI Z125, HONDA APE100, HONDA XR50, HONDA XR100, HONDA APE50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA MONKEY, HONDA GORILLA50, HONDA MONKEY, HONDA GROM, HONDA GROM
Used for NSR50. Stable and usable.
Circuit and Garage, but it is lightweight, strong, and easy to use. The use of sturdy rubber at the point that supports the Swing Arm is also good because it prevents the Swing Arm from being scratched. View detail
It can be used, but only in Large size.
Cost performance is sufficient. However, care should be taken when using it on heavy motorcycles. The clearance of the support part is large, so it will be slightly slanted. We own an NSR250R and an NSR50, and it can be used for both. Both vehicles are lightweight, so even if it is skewed by hand, it can be corrected. View detail
Used in Transporter
Used for fixing in Transporter.
Other uses include Tire Replacement, ChainMaintenance, and ImageTraining at Seat.
As others have mentioned, the part that touches the ground is easily scratched, so it might be a good idea to apply a thin Rubber Seat or similar at the home center.
View detail
Fits: HONDA MONKEY125, HONDA glom, KAWASAKI Z125, HONDA APE100, HONDA XR50, HONDA XR100, HONDA APE50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA MONKEY, HONDA GORILLA50, HONDA MONKEY, HONDA GROM, HONDA GROM
Great Quaility product
I wanted a affordable, no frills paddock stand, so I ordered this for my Z125. Great quality (as expected from Japan) and looks very nice. Just note that it does not come with the swing arm hook, which you need to order seperately. View detail
well made
The products of this manufacturer are well made and can be used for a long time.
The Motorcycle is strong enough to be lifted without rattling.
Since it is a relatively smallestAND, it is easy to secure a storage space.
Recommended
View detail
Can be STAND-UP by hand
I don't think there is anything better than this for maintenance of mini bikes and use in the circuit. It can be easily raised by hand. It is necessary to retighten it because it sometimes loosens. View detail
worth the money as expensive
Once you buy it, you will use it for a lifetime. The product price and shipping cost are quite high, but it is forgiven given the actual quality. This is my first time using the rear stand, so I bought it with half tension and half concern. Even if you do it two or three times, you can do it skillfully. Once you buy it, you will use it for a lifetime. The product price and shipping cost are quite high, but it is forgiven given the actual quality. This is my first time using the rear stand, so I bought it with half tension and half concern. Even if you do it two or three times, you can do it skillfully. View detail
Reliability
Used for Circuit driving with YZF-R25.
It is firm enough to hang safely even when STAND-UP.
Four rollers are also included for easy STAND-UP.
It is also very reliable as many people use it in Circuit.
View detail
Just the right price range
I used it right away, and thanks to the deep U-shaped Hook, it is a stable STAND without coming off from the middle of lifting.
The quality of the stand itself is good, but 3 of the 4 nuts are rusted.
View detail
A classic.
I have been using it for daily maintenance and circuits for a long time, and have been using the regular color Red for many years. I replaced it because the screw holes for fixing attachments and tires were getting damaged, the paint was peeling, and rust was increasing.
I purchased the Option Orange color, and the quality of the paint and the coloring is beautiful.
The handle is long and the roller's rotation is light, so the body can be raised with light force.
The weight of the product itself is not as heavy as the Stainless SteelRear stand made by Battle factory, but I personally think it is much more comfortable to use.
View detail
Maintenance
I am using it on my current z1000.
Maintenance Up.
View detail
Easy to use
Purchased for use with YZF-R25 Circuit.
Four rollers are also included for easy STAND-UP.
It is also Outclassing in reliability as many people use it in Circuit.
View detail
Before I bought it. It's a little high." After use. Wish I had bought it sooner."
Astro's cheap STAND that I have been using since my 400cc days.
After switching to liters, I used it again.
The moment it was raised, it bent under the weight and the Hook came off, damaging the Swing Arm.
So I decided to buy this STAND.
Easy to raise, stable as it is.
Performance of the product was excellent.
The only thing that could be improved is the bolt that holds the roller in place.
With the supplied M8*40 button bolt, there is no difference between the diameter of the head and the diameter of the hole to fasten the bolt, and I feel that the roller will come off.
(It doesn't actually come off.)
A large washer was added, and the neck was changed to 45 below the neck to reduce the amount of Screw applied to the washer.
View detail
It works great! I couldn`t use it on my Rebel 1100.
I bought this product to try to maintain the rear area.
It can be used on GSX250R without any problem.
The Rebel 1100 could not be used because the Swing Arm and Exhaust System interfered with each other due to their proximity.
If I remove the Silencer Only, I can use it.
View detail
The best thing is that it is easy to give away.
It is easy to raise the vehicle, compact and easy to use. I use it in my transporter as well.
It is necessary to prepare a V-hook to match the stand hook of the vehicle.
View detail
Maintenance Stand
I think it is necessary for models without a center stand, such as the SUPER SPORTS750 and Sports model. This STAND is easy to raise by one person. It is stable and well made, but unfortunately the price is a little high due to the rising cost of materials, but that can't be helped.
I think you can be sure to buy this one. However, there are a variety of Stand Hooks available, so check which one fits your car model and buy it.
View detail
It's still very stable.
[How is it used?
JC92 Grom's Wheel cleaning and
I purchased this for ChainMaintenance.
There are plenty of cheaper products out there.
I was excited because if you are stingy with the price of tools that you use for a long time, you will regret it later.
Was the one you received as per Image?
It was as per Image and the packaging was very well done.
How was your experience with it?
It can be easily lifted up with one hand and does not wobble.
(It is about to go up too vigorously. w)
[Points to note]
Use a tool to lock the front brake or a thicker rubber band.
It might be better to make sure the car body doesn't move.
How did it compare to other products?
JTrip's products are a little more expensive than other products, but
Repair Parts are plentiful and well made.
If you are going to use it for a long time, I don't think you will regret your choice.
View detail
Cost performance is good.
It is more solid and secure than I expected.
The U-shaped part is deep enough to fit on the Stand Hook and prevent it from coming off, so you can use it with confidence. The color is black, so it goes well with motorcycles.
View detail
Outstanding sense of security
This is enough if you don't want to change tires. However, when loaded on the Transporter, the STAND will be at the rear of the car, so it will stick out from the car.
Therefore, the Transporter stack should be V-shaped.
View detail