Reviews
UnitUnit E4010 Wheel Roller
I thought that I want to rotate the foil during car wash.
There was no handling instruction manual.. It was similar to the three-stage Roller adjustment position ??? Toilet paper exchange method. Push in Shaft and remove Roller.
Can I use it during car wash? Seal does not seem to be seen in Bearing and the balls are visible without water resistance so I can not use it for washing it.
The inside of Pipe will get rusted when you rinse water with RACING Sudando you own. The thing of this hand is not the thing used for car washing.
Moisture wiping WAX brushing Checking of Tire is comfortable and I think that this price Cost performance is very high. - - - But - - - Motorcycle standing vertically Racing Stand is easier to work with something.
A word at the end - - - Permitted price.
View detail
It was good not to be STAND
I was worried about Rear stand in Maintenance of Chain but I bought it because the price is cheap.
Although it is not possible to turn around the corner, it turned around more lightly than I thought.
It seems that the cost effectiveness is high.
It did not have to be an expensive Rear stand!
View detail
Description ease of use as in video
I got on the CB 1300SB, but the turning point of the parking lot was narrow, it seemed like I was going to get out of riding with difficulty putting in and out.
Explanation There was anxiety whether it could be done according to the animation, but after trying it was able to do as it was. I did TRY even without STAND 's Caster, but I could not do it unless there was room for some extent. Perhaps the person who purchases this product is a narrow Situation, so it would be better if you purchase it with a Set.
Satisfied as a product. I thought that Cost was a bit cheaper.
View detail
It can be used easily.
Yesterday I found this. If you look at usage, this is easy, buy that you can use it even for bride purchase. I made this Yazawa for the first time, but it was Simple and a little Large, but it was the easiest I chose this. Motorcycle has increased a little, and the place is too small, so it is necessary. View detail
Easy ChainMaintenance
ChainMaintenance of lifting and moving Motorcycle is bothersome because it is troublesome. It was very easy to turn Tire if Motorcycle weighing less than 200 kg. You can use it even with the car of Lock tie's Off. Even if things are small, it is light so you do not have to get in the way.
The price is also reasonable.
Because I am concerned about durability because it is Made in China -1 ☆
View detail
After moving out the apartment, the place was narrow also for maintaining and purchased for the Chain Maintenance to also maintain. Comment used for a 250-cc Motorcycle. Although it is troublesome too compared with the Maintenance using the
After moving out the apartment, the place was narrow also for maintaining and purchased for the Chain Maintenance to also maintain.
Comment used for a 250-cc Motorcycle.
Although it is troublesome too compared with the Maintenance using the
Maintenance stands, I think that he buys it and there is no loss if it is a direction of the same environment.
Compared with the Maintenance stands, a price is also handy.
View detail
The additional purchase of the Option was carried out for the Wheel assembly of a CUB. to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while. Although it was able to take easily, it is not in what has a not m
The additional purchase of the Option was carried out for the Wheel assembly of a CUB.
to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while.
Although it was able to take easily, it is not in what has a not much good feeling.
About
use, it can be used also with the Wheel of a thin Shaft and is saved very much.
An opportunity to use is likely to increase by having purchased this Option.
View detail
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since th
Since the Center stand did not reach the way of VTR of its own Motorcycle, he bought this Roller stand. It uses, and if a Tire is turned, it will have shifted horizontally. Although there was also a place which is hard to use just for a moment, since the Maintenance became easy, the direction which existed was better than there is nothing since it is not high so. View detail
[webike Monitor] It is an additional purchase in order to use it with the Wheel of the CUB. use top is satisfactory -- it is -- although -- connection used a few for the Shaft, having br(ed) [ were and ] > polished. and others are sat
[webike Monitor] It is an additional purchase in order to use it with the Wheel of the
CUB.
use top is satisfactory -- it is -- although -- connection used a few for the Shaft, having br(ed) [ were and ] > polished.
and others are satisfactorily easy-to-use.
View detail
Fits: HONDA MONKEY BAJA, HONDA MONKEY, HONDA GORILLA
Although the Maintenance stands which Collot who used before takes the side of takes a place, this Maintenance stands is slim, is treated and is satisfactory at a low price.
Although the Maintenance stands
which Collot who used before takes the side of takes a place, this Maintenance stands is slim, is treated and is satisfactory at a low price.
View detail
It uses by CBR250R (MC41). Since a car body is also light at 250 CC, a Round-and-round time gives a front wheel and a rear wheel. Although the purchase of the Maintenance stands was also Considered for Wheel cleaning or a Chain Mainte
It uses by CBR250R (MC41).
Since a car body is also light at 250 CC, a Round-and-round time gives a front wheel and a rear wheel.
Although the purchase of the Maintenance stands was also
Considered for
Wheel cleaning or a Chain Maintenance, it was made the Roller stand here which is cheap and does not take a place.
Since it does not use not much frequently, it was a correct answer here.
The
price is also compared with the thing of a certain Motorcycle article store, or it becomes and is cheap.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
My SR was not suited although it may be based also on a model. Although metal fittings are attached to the mounting part ? of a Center stand, explanatory drawing writes by hand first? I understand and it was that of ず potatoes. The metal fittings, the B
My SR was not suited although it may be based also on a model. Although metal fittings are attached to the mounting part ? of a Center stand, explanatory drawing writes by hand first? I understand and it was that of ず potatoes. The metal fittings, the Bolt, the Washer, and color which act as Locke of the STAND are attached. This color was a situation where it did not enter between Stays for a long time about 5 mm. He thinks that he will do what, and it extends and attaches the stay part of a Frame forcibly helplessly. Although it can be used that it can use, since it does not act as Locke just, there is likely to be fear of omission. The conformity model etc. would like you to indicate details to a slight degree. View detail
It purchased for Front-wheel cleaning. Since it was a sale article, it purchases for 3500 yen. When putting a Front tire on the Roller stand, it became somewhat prudent, but it could put easily and was also able to make cleaning common. It is satis
It purchased for Front-wheel cleaning.
Since it was a sale article, it purchases for 3500 yen.
When putting a Front tire on the
Roller stand, it became somewhat prudent, but it could put easily and was also able to make cleaning common.
It is satisfactory!!
When calling it the fine problem, it was heard also by the rumor, but while turning the Tire, a Tire shifts.
I think that it will derail to the extent that one week is carried out if a Tire is put on the center of a Roller stand.
In my case, it is ♪ which wants to use a Tire for the right corner of a Roller stand after next time, putting [ ♪ ] if a Tire is turned since it has shifted from the right to the left.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
It purchased to KX85. Although it is purchase for triangular STAND loss of KX85, the device which can be used for MX Motorcycle of almost all domestic Manufacturer & displacement volume is given, and it is used even if it GET(s) a new Machine.
It purchased to KX85.
Although it is purchase for triangular STAND loss of
KX85, the device which can be used for MX Motorcycle of almost all domestic Manufacturer & displacement volume is given, and it is used even if it GET(s) a new Machine.
Since it is a simple free STAND, it is called especially this and other predominancy is not felt, but the Logo of nonchalant DRC is pleasing.
Although I hoped that it has, and you rebought a pure triangular STAND, or hardly bought it, when needed at any rate (losing like me), is it a thing with this product more sufficient [ pure lay ]?
In purchasing this time [
], since priority was given to the spread with brand-name parts over No. 1, it worried, without this DRC Triangle stand MX being somewhat higher, and resulting in purchase easily, but it entered during the Sale and opted for purchase by some discount.
Even if it is not expensive goods, a price is worried too.
It was *5 when nominal cost was cheap to a slight degree.
(Since it is purchase during a Sale period at an I individual target, it is *5.)
View detail
A tire is only put on a roller part using a slope. Of course, it can use by both front rear. Although it is recommend items found useful at the time of a car wash, when using especially in the front, since a handle will naturally go out if a tire
A tire is only put on a roller part using a slope.
Of course, it can use by both front rear.
Although it is recommend items found useful at the time of a car wash, when using especially in the front, since a handle will naturally go out if a tire is turned, cautions are required in not pinching a hand strangely.
View detail
Fits: HONDA MONKEY BAJA, HONDA MONKEY, HONDA GORILLA
If there are one maintenance stands, the width of maintenance will spread substantially. Although power is needed for a while at the time of raising a car body, it is easy if a hang is held. It is user-friendly.
If there are one maintenance stands, the width of maintenance will spread substantially.
Although power is needed for a while at the time of raising a car body, it is easy if a hang is held.
It is user-friendly.
View detail
Fits: HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, SUZUKI RM-Z450, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ450F, HONDA CR125, HONDA CR250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125 14-18 (11mm), HUSQVARNA FE125-501 14-18 (11mm)
It was used in KX85. It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended. It is convenient if you are truly. It carried out in the rate, it rusted immediately, and became tattering
It was used in KX85.
It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended.
It is convenient if you are truly.
It carried out in the rate, it rusted immediately, and became tattering, and when the axle slider was attached, it was not able to use.
Furthermore, it damaged immediately, and the plug portion bent and was by carrying out.
It seems to be better to consider consumable goods.
View detail
It is a roller stand convenient for convenient cleaning of a roller stand chain and lubrication, maintenance of a wheel, puncture repair of a tubeless tire, etc. I think that it is very convenient also for construction of a rim line (^^ -- carrying is
It is a roller stand convenient for convenient cleaning of a roller stand chain and lubrication, maintenance of a wheel, puncture repair of a tubeless tire, etc.
I think that it is very convenient also for construction of a rim line (^^ -- carrying is also a compact size which is not lightly troubled by a space, either in the product made from 笙ｪ aluminum.)
If had one, it can use for years and finds it useful truly (^-^)
View detail
Doesn't it have the experience which became that you are likely to topple a motorcycle when applying maintenance stands? I have. It has pushed down that it is likely to push down. Since then, lubrication and cleaning of the chain were performed wi
Doesn't it have the experience which became that you are likely to topple a motorcycle when applying maintenance stands? I have.
It has pushed down that it is likely to push down.
Since then, lubrication and cleaning of the chain were performed without using maintenance stands, but the work back moved before a motorcycle one by one is dramatically troublesome ...
then, these pro-tools -- the convenient roller stand was purchased! This convenient roller stand is putting a tire on a top, and,
A roller assists so that a tire can be turned by hand! Also when putting a tire, since the guide has reached, it can put easily.
Cleaning and lubrication of a chain become very easy by the ability of a tire to be turned, and cleaning of a wheel also becomes easy.
Moreover, since the size of the product itself is small compared with maintenance stands, it is not troubled by storage space, either.
It may have to take care, although it is ! which is as the very name convenient roller stand.
It is using on the flat ground, and a thing which raises the car body if possible.
A car body will become unstable if it is used at a place with an inclination.
And if a wheel is turned in the state where the car body has not occurred, a tire will escape outside.
Therefore, you have to take care about using on the flat ground, and if possible raising a car body.
Incidentally, after setting a car body to a stand, the unexpected situation is avoidable if a ring stop is placed before and after a front tire.
If there is no ring stop, sense of security differs also in placing a gravel! Considering the facilities of the convenient roller stand itself, a little upper notes are not worried, although I can consider in trouble.
The one poorer at applying maintenance stands and the one good at, of course applying maintenance stands should taste these facilities once!
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
It is used for WR250R. Because a car body is heavy, it bends simply. Since the crack is not contained, it can still use, but if weight is applied, it will not arrange. Let's check the state of a ground surface.
It is used for WR250R.
Because a car body is heavy, it bends simply.
Since the crack is not contained, it can still use, but if weight is applied, it will not arrange.
Let's check the state of a ground surface.
View detail