Reviews
Easily Chain Cleanable! But there are better products out there.
As the title says, a motorcycle novice I want to clean Chain!" then it occurred to me
It is good to buy and use.
However, once you gain some experience and know the existence of various products, you will stop using them;
Specifically typhoon-proof and portable. Unit." products and
If you want to use it for more serious maintenance, you should purchase MaintenanceSTAND.
In terms of the first step of maintenance, this product can be recommendation.
View detail
Daytona
In terms of quality and texture is very suitable
About good using experience
About the beautiful design
About the size chart
The price is not too expensive compared to other products
About shipping and packing well
Any advice or notes when buying ------------------------------------------ ----------------- The quality and structure are very suitable About good use experience About beautiful design design About the medium size measurement table The price and compared to other products is not very expensive About transportation and packaging carefully All advice or note when buying Powered by Google Translator
View detail
A great, inexpensive product that can do large jobs safely.
Used to replace rear suspension on ZrX1200 DAEG.
Although the product cost about $10,000, the synthesis was high and there was no anxiety at all during the work.
Very useful for Front up or RearUp.
I wondered why I had not bought it before.
It was easy to assemble and remove, and the Body was shaped to fit easily into Garage, so it will be used more and more in the future.
View detail
It comes in handy
This is my impression after using it for more than a year after purchase. At first I was a bit nervous about handling it, but once I got used to it, I could move it to the position I wanted in one shot.
The STAND may or may not be able to move smoothly depending on how it is inserted, but once you get used to it, you will understand the hang and now it has become an indispensable product.
I installed the Side Stand side Mover in the wrong direction, which caused the Side Stand to go up, almost tipping it over (this was the first time, but not the first time). Also, does it depend on the vehicle?
View detail
easy to find a place to put things
It is small in size, so it is good to be able to place it in the right place. It can be used normally.
But if you have JTrip's Rear stand, that is more convenient in many ways.
View detail
Wheel and chain cleaning is easy
I purchased this product to clean Wheel and Chain.
I used to use a maintenance stand, but I had a hard time to wash them by myself every time.
It is also convenient that the width of the roller can be adjusted for each car model.
View detail
Large Motorcycle can be used, but it's tough.
I used it on a Large Motorcycle, but I have the impression that it does not improve efficiency on the Front because the Roller comes off from the Guide while turning the Wheel. View detail
Chain Cleaning
I bought this for cleaning the chain and was not sure whether to use STAND or not, but I decided to use this one, which takes up less storage space. I was worried about whether the tire would turn easily until I used it, but it turned perfectly. I was able to clean the Chain without any trouble. The price is cheap and I think it is a good product. I would say it is worth the price. It seems to last for a long time. I forgot to take a picture... View detail
Rolling may be a little heavy.
ChainMaintenance has become much easier.
I also have a Maintenance Stand, but this is sufficient unless it is a large job.
View detail
Convenient to have
It is useful to have it for car wash and ChainMaintenance.
It takes a little bit of strength to turn the vehicle when the body is heavy, but I was glad that I could choose the width of the Roller.
View detail
I thought it would be good for ChainMaintenance.
Purchased for ChainMaintenance
Made with reliable DAYTONA
View detail
Fairly easy to move
I used it to turn around in a tight spot and it was easy to use without much effort.
Rust is uncomfortable and difficult to move depending on the orientation of the Stand Mover on the Side Stand.
View detail
revelation
Large is useful for narrow garages. Women need a little practice when starting to use it. It is recommended to use it after practicing in a wide space. View detail
You'll get used to it.
Used on MT09, easy to use once you get the hang of it, but the price tag is too high. 10,000 or less is appropriate. View detail
Convenient
Convenient for cleaning the rear wheel and maintenance of the drive chain.
Chain can be cleaned very easily without Center Stand.
View detail
Triangle section is long and Motorcycle is not slanted.
Because the Triangle section is long, the Motorcycle is not slanted and will fall to the opposite side when the wind blows.
It is completely useless for both 18-inches and 19-inchesTire Racer.
I had to repurchase another product.
The Triangle seems to be about 1cm longer than the normal one that was repurchased.
View detail
STAND
I used to work with Jack on it, but now I can work without anxiety.
Personally, I'd like to see Tie Downs and lashings included.
It could be used in a variety of ways.
View detail
Very convenient, but also requires caution
With the Motorcycle Mover, I can easily pull my 250kg lighter machine up against the garage wall. I don't have to push and pull the machine over and over again, which saves me a lot of time and effort.
The product is well built, rigid, and beautifully finished with a high quality feel.
However, there are some points to note.
The Motorcycle stand may be paid off while the Motorcycle is being moved in conjunction with Stand Mover.
Relying too much on Stand Mover can be dangerous, and I almost knocked over a Motorcycle once.
This can be prevented by installing the Stand Mover with awareness of its orientation and moving the Motorcycle slightly upright.
Because we are moving heavy objects, there is a certain amount of danger involved. We always try to handle them with care.
View detail
It's expensive, but nothing else will change that.
The price is quite distressing before purchasing, but if it can be moved freely, it will be easy to move in and out of Garage, and even increasing the number of cars is not a dream.
With this New Model, both the front and rear wheels can be moved, allowing for effective use of space.
I saw some reviews on the old one that it still had the Edge, but I guess it's good that it's made in Taiwan? There is no Edge and there seems to be no worry about scratching Boots.
I'm not sure about Merit, which increased the number of Bearings on Motorcycle Mover to three, because it allows you to move without grounding the Bearing under your feet when pushing and pulling. I think it is suitable for those who want to stabilize the bike and step on it as hard as possible, but for me, it is useless because it increases the resistance to ground contact.
I tried to move GSX1100SKATANA which is the heaviest body to move The Motorcycle Mover did not flex, and I could feel a sense of its solid strength, which was reassuring.
Subtle is the Stand Mover.
When using the Motorcycle Mover, the front or rear wheel is used as a branch in a circular arc, so the bearing of the Stand Mover is designed to roll in a slight arc.
It is good if you work from the Side Stand side, because you can push and pull it while checking, but from the Right Side where you can't see the Side Stand, you can't slide off the Stand. I am afraid that it will come off and I will fall off.
As a countermeasure, since the board is reasonably thick, I am thinking of making a tap, making a rip with AluminumAngle, and attaching it with Butterfly Screw. If you want the best, it would be better to laser-cut the plate into the shape of STAND and sew it (you need to know an ironworker who has a laser cutting machine to do this...).
A clean floor surface is a prerequisite for installing Motorcycle Mover. My garage is an office that originally had Linoleum flooring, so the concrete is rough and the rolling resistance is large. (I feel like putting a steel plate on it.)
I would like to ask WorldWalk to sell the Stand MoverSingle Body, because to pack the Motorcycle, you have to push it towards the Left Side, but it is difficult to retrieve the Stand Mover. I hope you can make this happen soon because I would like to have two more cars.
View detail
Satisfied
I bought it because I moved to a new house and my parking space was getting smaller. I use it on my ZEPHYR750. I use it on my ZEPHYR750 and recommend it to short women who are not strong to practice many times to get the hang of it. View detail