Reviews
Product with good texture
Babyface
RaceConcept. RaceConceptHandlebar Kit Up typeSIDEOffset
UP45-10
Handlebar240mm
Item Number : R05-HS47100M
car Species:YZF-R25 (8BK)
The texture is very good and beautifully finished. Unfortunately, the brembo radipon could not be installed this time because it interferes with the Cowl.
View detail
It was not long enough and could not be installed.
Installation is easy and anyone should be able to install it easily.
The one I purchased this time could not be installed due to insufficient length.
View detail
Babyface Hose clamp
I purchased the same size to match the 7Φ of the KRH hose, but the size did not fit and I could not clamp it. View detail
It's the worst
I purchased one for SC82 with the correct part number. The model number is also on the delivery note with the seal, but the Babyface model inside is for 250RR.
I have not heard anything about my return request.
It feels like I've waited two months for the product to be delivered, and even more like I'm almost a month away from an answer to my request for a return.
View detail
Not attached to Type 3 GSX1300R HAYABUSA
I bought it because it was listed as compatible up to 21, thinking it would include Type 3, but the screw diameter is different, so it can't be installed.
Please note that it cannot be installed on Type 3.
View detail
Material:I would like to change Plastic's Pedal bar
I bought Babyface Rear Sets, applied Screw lock and assembled them, but after 500km, the Bolt and Pedal bar came off during driving and went missing. I think I will use the pedal bar of the boss made of Gold of Striker back stepRepair Parts. View detail
Hard to use.
The hook part is very small, so it is a little difficult to use. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I have no complaints about the product.
Easy installation with dress-up on Title Street in 5 minutes!
It just arrived when I forgot about it, beyond the original schedule from the time I ordered it to the time it was delivered!
I'm so angry.
View detail
Hole Pitch does not match.
The hole Pitch does not fit in the first place. The one which I bought in a certain Amazon is good, and I wanted to buy another one, but I bought it here because it is out of stock. If the hole is Gap though the product number and the model number are the same, even the outside dimension is different. It is not impossible to use if the hole is made big through Drill. I'll put a comparison picture on it. View detail
First of all, the hole Pitch does not match.
I compared it with the one I bought at another certain Site. The one from a certain Site sticks normally, and the one I bought here does not. View detail
Buy because it's less noticeable
I bought this product to make it less noticeable, but it is very difficult to put Helmet on.
I can't lock my helmet quickly when I'm touring, so I'm behind everyone.
I was disappointed because the look and Design is good, but I wanted something more SMART and quick to lock.
View detail
unsuitable
It doesn't fit at all.
What is a suitable car model…
I contacted them to return the product but no response.
View detail
To support Webike?
Around Wednesday, I received an email saying the item was in stock, so I set up my work area for the weekend and waited for the shipping notice, but it never came. I've been trying to contact you for a while now, but you never reply!
Did you receive the item but give it to the wrong person, or did you mistake it for the wrong item? I know we're all human, and we all make mistakes, but a mistake is a mistake, and a heart that recognizes that is Large!
Ignoring customer inquiries is out of the question in the customer service business!
I have purchased several expensive items from webike, but I will purchase from other stores in the future.
Of course, I can't rate the product because the product hasn't arrived!
Your rating is 100 Minus.
View detail
Delivery time is impossible.
I ordered it as soon as the delivery date was fast, but due to repeated delivery extensions, I gave up waiting 3 and a half months after ordering ….
This order cancellation is not the fault of Webig, but completely due to Babyface's production negligence.
I don't want to buy Babyface products in the future, because I can't believe that such a simple racing hook will not be produced for more than 4 months.
View detail
Disappointing that I can't install it, sir.
Both of the mounting points are tight holes and cannot absorb loose adhesions.
I think there may be a problem with the individual differences between vehicles, but I was not able to install it.
View detail
You may need a Helmet Anchor.
It looks perfect.
When I tighten with Tandem Footpeg, the hole position accuracy is too good, or it is off, or Bolt does not go into Smooth and hang.
After installation, I tried to put the D Ring of the Helmet through, but it didn't go in.
I managed to get it in at an angle, but the lock pin was bent and couldn't fit in the lock hole, making it useless.
The manufacturer recommended the use of Helmet Anchor as a guide, but
I didn't think to use it that much.
Because I never got to use it.
No performance, features, feel, or cosmetic ratings.
View detail
Can not be installed
BEET made Aluminum Handlebar for Z1000 and EFFEX Inner type Bar End
I used it in combination, but I wanted a little more heavy Bar End
I bought it this time. Is ... Universal Type Pipe inside diameter 14 mm corresponded inside Pipe
Inner Weight does not come in ... If we measure the diameter 14 mm
I can only think that it is made without thinking about tolerance.
I want to return but I can not return it because it opened out.
Well "Universal Product" So is it such a thing?
I am disappointed though it is a famous Manufacturer.
View detail
Reverse Change.
Although Reverse Change and Wae Big wrote it, since I could not make a reverse change, I abandoned it.
The text was changed by my point, but no response.
View detail
I will not tie it.
The attached Screw does not fit into the hole as the dimensions are different at all.. Can not install, what is this - - -
I do not write more than 60 letters
Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
View detail
Helmet falls on footpeg
I installed it in CBR 1000 RR of 09 year but it seems to be in a bad position
Locking Helmet of Full face
Footpeg strikes the bottom of Helmet.
If it shakes with the wind, the gorigoli will be full of scratches.
KIJIMA is more likely to be used for SMART.
I am a touring bar of Benchura
(Things like Tandem bar) Because I am using
KIJIMA made it impossible to install
I use Babyface made
The one I recommend is KIJIMA.
View detail