Reviews
Fits: HONDA Integra750, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CB650F, HONDA CBR650F, HONDA 400X, HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA CBR400R (2013-), HONDA CRF250L, HONDA glom, HONDA glom, HONDA GROM, HONDA GROM
2016 NC 750S RC 88 is also supported
2016 NC 750S RC 88 was also firmly compatible with.
Since the Tail lamp was originally Clear Lens
If you also unify Blinker, exchange it or not.
How about that?
I am satisfied with Large.
Well then where will I beat next?
View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
Brilliant Gold
Antlion is Matte feeling, here and POSH are Clear Color.
Easy to install, tasteful Handlebar Around the point around Large change is good.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, HONDA CB250R, HONDA CB125R, HONDA CB125R, HONDA CB400SF, HONDA CB400F, HONDA CBR250R, HONDA CBR250R, HONDA GROM, HONDA GROM, HONDA CB400SB, HONDA CBR400R, HONDA CBR400R
Slightly rattle.
Since the interval between Grom 's Change Pedal and footpeg is narrow, it was hard to raise at Riding shoes, so introduction.
Although dividing Pin was reusable, purchased at Homsen.
Installation is easy, but a little gap is created, and it gets rattled accordingly.
But, I got a gap, so I am satisfied because I was able to position the Rear brake pedal to a step easier.
View detail
The ENDURANCE Touring Rear Box 30L is actually a very well made and nice looking top box. It looks better in hand than in photo. It comes with an adapter plate and fits nicely on a Honda CB1100 (2014). The mounting and keyed ejection mechanism are no f
The ENDURANCE Touring Rear Box 30L is actually a very well made and nice looking top box. It looks better in hand than in photo. It comes with an adapter plate and fits nicely on a Honda CB1100 (2014). The mounting and keyed ejection mechanism are no fuss and work well. It easily holds a large/wide full-face helmet. Value is very good to excellent. From order to delivery was 10 calendar days (Japan --> Canada). I believe that is pretty good. Shipping packaging was solid and well done. View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
It does not correspond to the thickness of Les Bar End.
As I saw that I was out of impregnation before, I put water in Parts and Lever according to the instruction manual and as a result the Brake side finally succeeded after installing on a day when the temperature was high , Clutch side has expired. The cause is due to the fact that the elasticity is small, but it is forced into the thick bar end.
As a result, we attached a thin double-sided tape on the inside of the Parts and fixed it in a form to fix it in such a way that it made it inconspicuous. When considering purchase, I think that it would be better to prepare for it to expire.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CB400F
Received with nice package. Impressive as this is my first time ordering from Japan. there are 2 holes upon removing the original handle bar. so it would be great if there is a cap to cover it. anyway. great stuff. happy with it.
Received with nice package. Impressive as this is my first time ordering from Japan. there are 2 holes upon removing the original handle bar. so it would be great if there is a cap to cover it. anyway. great stuff. happy with it. View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
As Holder is black, I changed it to Gold and saw it.
Master cylinder holder, Mirror Holder is Black, so I changed my master cylinder to Gold so I changed it to Gold the same way.
I will write a little bit of impression (Although it is a point of note)
1. Remove and remove 4 Bolt for installation and removal.
2. Replace with the attached Bolt and tighten.
3. Loosen Holder's Bolt and Body (R - Please beware of the fall as LLever itself comes off.
4. Although Holder has UPMark in OEM, it is not in Endurance made, so please pay attention to up and down.
Watching the Endo RAN Mark
5. Then alternately equalize upper and lower Bolt etc etc. If you do not tighten it will stick with a strange so always surely etc. To tighten
6. R - Check the position of L Lever and note that the angle will change as you can not fit it together.
That is my impulse.
A little anxious about OEM Holder is Exactly fit, but this product got a little clearance.
This may be the accuracy of the product, but I was a little worried
Goods changed feeling as Black replaced Gold.
View detail
Fits: HONDA CB250F, HONDA Forza Si, HONDA PCX125, HONDA ZOOMERX, HONDA CB600RR, HONDA CB400F, HONDA CBR400R, KAWASAKI NINJA250R, HONDA CB650F, HONDA CBR650F, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1100, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA 400X, HONDA VTR250, HONDA VTR-F, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
Used as mounting base for Fog Lamp switch
【What made you decide the purchase?】
- table (Front) The surface is flat
【How was it actually used?】
I use it as a mount base for fog Lamp switch.
Since the surface was flat, I could install the Switch without problems.
Because NORMAL's master Cylinder Holder has a curved surface, we are exchanging it with this Holder.
By the way, Switch is amon's "Lock fastener" (http : / / www. webike. net / sd / 1353473 / We are installing it using.
【Mounting was difficult?】
Installation was not particularly difficult.
【Please tell me the installation point and hang】
The vertical direction of the Holder is fixed when installing it, but usually it is as understood by the logo mark of the surface.
Since this logo mark is hidden by Magic tape this time, I wrote the arrow on the back side with Magic so that you can see the direction of the top and bottom.
[Is there anything I was disappointed about?]
Although it is not about disappointment, although the same Black has its color tone different from that of the master Cylinder, there are times when it is worrisome (See the posted photo).
【Hope for Manufacturer - Please let me know if you have any improvement points]
As of now, nothing special.
【Have you compared items?】
- ENDURANCE : Master Cylinder Holder Kit
(http : / / www. webike. net / sd / 21853260 / )
Products of this impule Holder 1 pc. Although it is only here, Quantity : 1 Set of 2pcs. It will be.
The Clutch side hid in the Antennas integral type ETC and is inconspicuous so we stopped exchanging the Clutch lever Holder.
[Others]
PIAA's Fog Lamp (http : / / imp. webike. net / commu / diary / 0125602 / ) Included a Switch bracket for attaching the Handlebar, but using Bracket to attach a Switch to the Brake side will interfere with the Master Cylinder.
Therefore, Switch is attached to Master CylinderHolder.
* "The 5th Impression Con test" (http : / / campaign. webike. net / 2016 / 03 / 20160318_impression_contest / I'm applying to.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
I have run out when installing.
Since there are times when Lever is hot such as summer, I bought it. I included ample moisture and installed little by little, I was surprised it was torn down. Because it is a high item, please give me a more rugged product. View detail
I am careless of myself.
I compared this product with the type attached to the Handlebar and purchased various things on Handlebar, so I thought that this was the only purchase.
The goods reached, I thought about installing and I noticed that I removed the License Plate. The position of the hole does not match Bracket. License Plate comes with Large I'm getting worried if it's durable.
Since my car model is not domestic, Plal board was attached so that Dealer could install Japan's License Plate.
In the end, I gave up mounting on Screw and pasted it with Super Strong Double-sided Tape.
Everyone thinks that I will not do this, but I recommend you purchase after checking in advance.
View detail
It became Dress-up.
I bought it for Dress-up. Because it is the same shape as the OEM Product, it was easy to install without the need for machining. However, it is a place where it gets hot, so I'm not sure if it will discolor in the future. After use, if there is change I will imprint again. View detail
Fits: HONDA WAVE110, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk, HONDA Forza300, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk
Even though there is adaptation to PCX 125 - -.
I bought it as being adapted to PCX, but when installed, it interferes with the Brake lever and the Stop-lamp stays on as it stays. Also, when hitting Shield Handlebar is Quantity : Pair (for Left and Right) Both will not be able to finish to the limit.
"Processing is necessary" If it says, do not put it on the adaptive vehicle. I did shopping entirely useless.
View detail
Fits: HONDA Dio 110., HONDA Dio 110., HONDA READ 125, HONDA Zuma X, HONDA READ 125, HONDA Zuma X
Like an OEM
She is like an OEM Roller. It seems that durability can be expected. The material of the weight part is unknown, but I will believe that accuracy is good.
Setting is out because 11G is 6 pieces, so it was good to correspond, but the price is too high.
Next time you may not buy it.
View detail
Fits: HONDA Rebel 250, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CB400F, HONDA CB650F, HONDA CBR400R, HONDA CBR400R, HONDA CBR650F, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA INTEGRA, HONDA NC700S, HONDA NC700X
Smoked lenses fit great with interlocking tabs just like the stock amber ones. Amber bulbs fit in perfect and give off plenty light. Very happy with this kit.
Smoked lenses fit great with interlocking tabs just like the stock amber ones. Amber bulbs fit in perfect and give off plenty light. Very happy with this kit. View detail
Fits: HONDA CB1300 SB [SUPER BOL D'OR] SC54, HONDA CBR250R (MC41), HONDA CB250F, HONDA CB650F, HONDA CBR1000RR FIRE BLADE, HONDA CBR650F, HONDA CBR600RR, HONDA CB1100, HONDA 400X, HONDA CB400SF, HONDA CB400F, HONDA CBR400R, HONDA VTR-F, HONDA VTR250, HONDA CBR250R (MC41), HONDA PCX150, HONDA FORZA-Si (MF12), HONDA CBR125R, HONDA PCX150, HONDA GROM (MSX125)
The texture is Large Width Up (I do not understand to others - - - )
CB1100 (SC65) OEM Holder was interested with the iron color Black color, I felt somewhat plain feeling. Purchase this part purchase with Wa Big immediately. CustomHandlebar (EFFEX) Select the same colored code as. Self-satisfied with looking and installing 120%. Every time I ride, it is also an eye-catching part and a part of Recommendation.
View detail
It is higher than the list price!
I bought it here but I thought what the selling price is higher than the tax included regular price written in the box.
The performance of the product certainly Response up but I am concerned about the drop of Torque at high revs despite the Bore Up Kit. Clutch side also has become lighter so you may feel it extra.
Probably NORMAL's Engine Displacement Volume conversely thought that Torque's depression was inferior to NORMAL on the uphill slope
View detail
Fits: HONDA CROSSCUB [CROSS CUB] 13-17, HONDA CROSSCUB [CROSS CUB] 13-17
This is Recommendation!
It is too high that it is too high to forgive by CROSSCUB 's Styling Meter position. Since 110PRO is Base, the interval between Headlight and Meter is wide, and Front view is absolutely Manuka. This product is a slogging thing that can lower the Meter position that is too high and change the Riding Position a bit to Sporty.
Installation is extremely easy if you proceed as instructed. After installation, the height of the Handlebar drops by one and the aperture angle comes 5 degrees before. It is a slight change, but it seems to be quite compact Riding Position. Personally I feel rather easy to ride than NORMAL. Especially Handlebar height became hard to stiffen even long distance.
Takegawa also has similar products, but that Handlebar Guard personally failed here. Price is also cheaper than Recommendation with Takegawa Set!
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA VTR250 typeLD, HONDA VTR250-F, HONDA VTR250
Cb 400 sb nc 42 'mounted on 11 MODEL
OEM's Orange color was not bad, thought that I wanted to give a more Custom feeling, as a result of hesitation as to Clear or Smoke, I saw that Smoke was attached to the cb 1300sb that was in a second-hand shop, I think this is it I made it to Smoke. I feel satisfied with Large with perfect items in texture making, coloring in all.
Order summary MC 42 (March, 2002 ─) As I was worried about attaching '11 MODEL, I could finish installing without difficulty. Packing can also be used as it is, it is possible to buy it at about half price compared with P company, and it is satisfied even more.
View detail
Fits: HONDA SuperCUB110pro [SuperCUB110Pro]., HONDA SuperCUB110 [SuperCUB110]., HONDA SuperCUB110 [SuperCUB110]., HONDA CUB [Cub]., HONDA GROM [Grom] (MSX125), HONDA APE50 [Ape]., HONDA CROSSCUB [Crosscub]., HONDA APE100 [Ape]., HONDA GROM [Grom] (MSX125), HONDA APE50 [Ape]., HONDA CROSSCUB [Crosscub]., HONDA APE100 [Ape].
SuperCUB 110PRO gets a bit stronger on the slope, ...
SuperCUB110PRO (JA10) Use to (OEM 14 T -> 13 T)
Others are Chainetc. It is OEM..
The thing was almost the same construction as the OEM, and there was almost no interference. Chain was ok with 1 masu charge.
If you leave the OEM ascending a mountain road (2 ⇒ Shift to 3rd speed, 50 km / It was stalled even at Full throttle at h), but it started to accelerate somehow with changes to 13T.
Also, in case of yourself, fuel economy worsens (About 55 → 50) And 70 km / H The engine sound and handlebar vibration on cruise also became severe.
* It does not become a problem much at commuter speed, and it is under consideration to return it to 14T at Ron Two *
I think that the price is reasonable and the effect of Custom is also easy to experience.
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA READ 125, HONDA READ 125
Recommended for NORMALLEAD 125
【What made you decide the purchase?】
Because of acceleration force of NORMALLEAD 125
【How was it actually used?】
NORMAL's Weight Roller is 18 g, while fitting 14 g of Weight Roller makes Balance good for furniture, acceleration improves and ride became easier.
【Mounting was difficult?】
Basically you can remove Cover with an 8 mm socket and easily exchange with Universal holder and Socket wrench. It is better to manage Torque in Torque wrench when closing.
【Please tell me the installation point and hang】
As the Scooter system is a dry driving system, be careful not to add Oil to the Pulley part which corresponds to Belt. If you lose it will degrade well.
Also, when you form Drive pulley, if Belt is not thoroughly dropped, it leads to Trouble, so be careful. Shrink the center spring on the Driven side, put Belt in the back and let the Drive side Belt have room and it is ok.
[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer - Please let me know if you have any improvement points]
Light Lineup of 10 g or less.
【Have you compared items?】
Compared to other company's Weight Roller, making is better for OEM
[Others]
Currently we are working on Clutch Spring, Center spring, Pulley, Drive face and so on Weight Roller uses 10 g, but if you only change from the OEM driving system this 14 g is recommended.
I also like compatibility with MORIWAKI muffler.
View detail