Reviews
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB, HONDA LITTLE CUB
Rear shock with good cost performance
[How is it used?
Bore up the LITTLE CUB and it became faster, but it bounced around on the fluffy Normal suspension due to road surface gaps, etc. and could not keep pace, so I replaced it.
We chose this product when we looked for something that did not change in appearance from OEMNORMAL to LARGE and was not too expensive.
Was the one you received as per Image?
I like the thinness of the OEMRear suspension and the large difference!
Plating and paint texture also felt overpriced.
Was the installation difficult?
Very Kan Tan. just replace one side at a time with OEMRear suspension.
The Instruction Manual says that applying Grease to the vibrating parts will make the movement smoother, so it is recommended to prepare it beforehand.
How was your experience with it?
Quantity:I did not expect much since it was cheap, about 10,000 yen for 2pcs, but I found it to be more than I expected.
In the past, the fluffy OEMRear suspension was bothersome when picking up road surface gapping, but this product absorbs the shock so smoothly that the rider can maintain his pace.
[Others]
The Cap Nut and Washer at the Rear suspension attachment point tend to be rusted, so it may be a good idea to have a new OEM one.
We also want to make sure that the Overtorque is not too tight to prevent movement.
View detail
CT125 was not supported.
I bought it with the naive hope that it would fit ServiceCoupler, but it did not fit at all.
I used only MarkTube, Bullet Terminal and Wiring and discarded Coupler.
View detail
Fits: SUZUKI ST250, YAMAHA YZF-R3, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZF-R3, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, SUZUKI GRASS TRACKER Big Boy
It's not very plain, but I always replace it.
Purchased this one because it is slightly cheaper than OEM. I don't think there is much of a problem. I know many people reuse them because they tighten so tightly, but considering the significance of Gasket being used there, I think they need to be airtight. So I'm not being stingy and replacing it. I want to change the OEM with an external Exhaust System, which for some reason comes” regularly! I change them when I'm in the mood to”change them. View detail
Used for Brembo caliper
I purchased the Beta pin for Caliper's Pad pin because it had run out at some point.
It was cheap and saved me a lot of money. I will be Wiring it just in case.
View detail
Do it once a year.
[How is it used?
I use it for Wire greaseUp on my Motorcycle.
We try to Grease up at least once a year.
Was the one you received as per Image?
It was just as Image.
However, without the Instruction Manual, I might not have been able to understand how to use it at first.
How was your experience with it?
It works fine, but it is a little difficult to do short Wire, etc.
When wire grease is sprayed vigorously, it overflows through the gaps.
[Points to note]
Not particularly
How did it compare to other products?
I think KITACO was the cheapest, although other manufacturers also offer this product.
I think the usage is the same everywhere, so the rest is preference.
View detail
![Stainless Lock Wire [0.57mm] 5m](https://img.webike-cdn.net/catalogue/11305/056-0500057_TS.jpg)
Wiring.
I bought it to do Wiring.
It is safe to say that it is for Motorcycle.
I wanted to use it just a little bit, so I was glad to find a shorter length for sale.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
Stylish and easy to apply
Simply attach with the special double-sided tape.
But I wish they had put it on the product side from the beginning...
The product is small, so it is a little difficult to hold when applying it to the Motorcycle side.
View detail
At the time of Screen replacement
I purchased this product because the well nut was Crack cracked due to deterioration when replacing the Screen.
Compatible with M5 well nut for all Kawasaki vehicles, and is a recommendation because it is more affordable than OEM products.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO
USB power supply for Motorcycle
I bought it because I have a Smartphone Holder and wanted a USB power supply as well.
22Φ mounted on a Handlebar.
With Waterproof Cap.
View detail
KITACO heel plate set
The heel plate creates a lot of scratches because it touches the shoes before they are worn. Wearing a heel plate has a dress-up effect, but it is very good because it also protects the heel plate. The color is also silver and the X-shaped design makes the monkey cuter. I recommend it because it's a product that can be easily mounted. Thank you. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
KITACO Meter Protective Film
It was good to find a quality product that was simple to install. I will buy it often in the future. Thank you for the meticulous packaging and sending. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
KITACO Helmet Holder
Installation was quick and easy. Before releasing the bolt, you must remember the original position to hold it in its original position. I bought a high-quality product, so if someone asks, I will highly recommend it. View detail
ODBAdapter
Connect to SMART phone to see Motorcycle information. RPM, etc. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Convenient
It is useful for Tandem or when you have a lot of luggage. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI katana, SUZUKI GSX1300R HAYABUSA
Gasket is satisfied with KITACO products
No problem if you use KITACOGasket!
It's easy to find, so it's a big help!
View detail
Fits: SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI GSX1400, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI GSR250
Reliable KITACOGasket
No problems at all! You'll have it in no time! Reliable KITACO products!
The only strong point is Quantity.:I want you to make 1 Set of 4pcs. too. (Lol)
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Easy power extraction
I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail
KITACO driven sprocket (rear)
Webike Webike.
125 420 420 people Home page.
I want to know what I'm saying.
The quality of the product is very good and the packaging on Webike is also very good.
I purchased the parts for the Monkey 125 420 chain based on the recommendations of other buyers.
I look forward to installing this product. -------------------------------------------------- -------- The quality of the product is very good and the packaging on Webike is also excellent. I purchased it based on recommendations from other buyers and purchased parts corresponding to the Monkey 125 420 chain. I am looking forward to installing this product. When you wear your clothes, you can wear your clothes, you can wear your clothes, you can wear your bike, and you can buy your own clothes. I purchased parts that correspond to other purchases. It's time to put on your clothes and put on your clothes. Powered by Google Translator
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA KITACO cylinder head compatible, HONDA APE 50, HONDA APE 100, HONDA XE series, HONDA CB Series, YAMAHA TT-R50E, YAMAHA TT-R125, KAWASAKI KSR110, KAWASAKI KLX110
Genuine Kitaco Titanium Nuts & Adjustment Screw Set for Yamaha TT-R125
The customer wanted to change out the adjustment screws for something a little more robust and they suggested the Kitaco titanium nut and adjustment screw set. I honestly did not know that Kitaco did titanium but I guess with the great parts they make, why not. The price was really good for what you actually get. With some other parts, I had my order shipped using EMS and arrives in perfect condition in 5 days from being shipped. The screw set came in the Kitaco box and was well presented. The machine work on these screws and the nut is excellent. The threads are all perfect with no burrs or weird edges. They fitted exactly as I expected. I am really impressed with Kitaco as a brand and will no doubt be looking at them for other parts. Thanks Webike. View detail
KITACO Shroud Bracket Set (Oil C)
Build quality on the bracket is very sturdy and strong. Hardware bolts are included. Installation was fairly easy because i already had my airbox removed as I am running an aftermarket air intake. The reason i purchased this product was to keep my side body panels secure from vibration from rides or winds going against me and it would flap the body panels because my stock airbox was deleted and I needed something to secure my body panels in place and this product did just that to keep it in place. In the future i may purchase the cooler assembly since I already have this bracket. View detail