Reviews
Durability..
I am using it with Bessler's GoldenPad and the initial bite is thin. I read that the Floating Pin will be replaced at about 3000, but I haven't seen how much it will lose yet.
Really, at 3000, would it be tough to drive around town?
View detail
To balance with Rear...
When replacing the rear suspension, I used a RateUp spring to get the balance.
I used #15 Fork oil for the installation.
Spring with the same Variable rate as the OEM, but with a RateUp of about 10%.
I couldn't tell the difference myself. (^^;)
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
Exhaust Studs
These feel great but were missing the nuts to hold the exhaust on. not a problem but would be nice if they were provided as showen in the pictures View detail
Motorcycle Dress-up
I bought this for my M10 but it was for my M8. View detail
Oil Catch Tank
About quality and texture The product is well organized About the feeling of use If the weather is hot or the rubber is worn out, I think the product will disappear without realizing it Products to buy together oil catch Difficulty of installation easy, simple Cost performance and comparison with other products It was nice to finish it neatly And the product composition is good. It also provides hexagon wrench About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I chose this product as an option that I can choose, and I bought it because many people seem to choose this product, but I'm a little nervous because I press the hose to fix it. View detail
Fits: KAWASAKI 750SS MACH III (H2), KAWASAKI 750SS MACH III (H2)
For Piston exchange …
We recommend replacing them together when replacing the Piston.
After all, the sense of security is different.
View detail
Fits: HONDA NSF100, HONDA APE100 [Ape] TYPED, HONDA XR100, HONDA XR50, HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA NSF100, HONDA APE100 [Ape] TYPED, HONDA XR100, HONDA XR50, HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY].
In play was seen and it purchased as appropriation parts to a choinori. Although attached by bolt-on, the size of a thickness ? spline part had a being delicate difference, and there was some shakiness... (although it was also in in play [ of other Ho
In play was seen and it purchased as appropriation parts to a choinori.
Although attached by bolt-on, the size of a thickness ? spline part had a being delicate difference, and there was some shakiness... (although it was also in in play [ of other Ho ]) Since shakiness was worrisome, shakiness was pressed down with the washer.
When it could do, although he wanted to put in inside, it bore on the relation top outside of the spline.
The washer was made from about 3 mm in thickness, about 26.5 mm in width, and the bore diameter of 16.2 mm.
Since it was appropriation, it was considered as such evaluation, but the thing itself is very satisfactory.
(Fuel consumption and an engine sound improved.)
View detail
Very nice but...
PRO : It's good for quite any engine, i've ride with it with a 120 lifan, 150-160-184 yx, 150 dohc daytona, since some years. It's a bit loud, but not too much (far less than a Over, a bit more than a take z) CON : Flange bend a little that's right. there is some leaks between silencer and tube, and the welding of the thermal protection support broke at it's bending by vibrations. Need to replace insulator some times. It's composed inside of a tube with insulator, and a rear chicanery (not openable). View detail
exchange
The installed OEM Product was out of date, so we replaced it with this one.
It looks beautiful and KICK starting is easier to do.
I am concerned that it gets in the way a bit when stored.
View detail
Installed on NSF100
It looks good but was difficult to install. View detail
Beautiful
I installed it on Axle Shaft.
I like the look of it, it's beautiful.
View detail
I got the wrong size.
Check the Size carefully!
Texture is anodized, clean
If possible, it would be easier to use if the Hose spacing was a little narrower.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
no problem
The outer diameter is a little smaller than Active etc., but there is no problem. View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100 Type D, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I guess the Parts are more for looks than function...
Driven Sprocket more firmly than the OEM steel plate punched out Parts.
I bought it to see if it would Hold, but I thought it wouldn't make much of a difference.
Sprocket's hold method itself remains the same, so it's no surprise.
I'm sorry to hear that, but I've Upgraded the look quite a bit.
But I can't see it when I put Generator Cover. This was also disappointing.
View detail
honda-manki
strengthens the steering wheel well, but slightly overlaps the speedometer. To install, you need a key and slide the straps on the steering wheel harness. -------------------------------------------------- -------- well strengthens the wheel, but slightly overlaps spidometr.chtoby set the required key and move the straps on the handlebar fixing wires. Powered by Google Translator View detail
Replacing it with a new one will give you peace of mind.
I bought this to replace the new one when I installed the Bore Up Kit.
I thought about purchasing OEM Parts, but I don't have the Parts List for CD90.
I chose this product, which clearly states CD90 as the supported format.
If you are doing a large custom job, such as building a kit, you can use the
I'm hoping to replace it with new Parts as my budget allows.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
I want to have it for motorcycle maintenance.
I bought the SHIFT UP SHIFT UPKnock Pin Set this time and I would like to Impression it.
The product is in line with the previous reviews I see on the net.
If you are considering purchasing a similar product with a similar
I don't think it's a good product to buy.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
I want to have it for motorcycle maintenance.
The SHIFT UP SHIFT UPExhaust stud bolt caught my eye, so I bought it on impulse this time.
The product is in line with the previous reviews I see on the net.
If you are considering purchasing a similar product with a similar
I don't think it's a good product to buy.
View detail
I want to have it for motorcycle maintenance.
The SHIFT UP SHIFT UPStud bolt set happened to catch my eye, so I bought it on impulse this time.
It was a product I was curious about and purchased
Honestly, I have no complaints about the quality/price of the product and it's working normally
However, the product was not outstandingly good in any way
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
So bad
I tried to install it, but it didn't stick because it was too large for the width of the Fork I tried to loosen up the Nut of the "No" and it didn't work It's a shame because the quality was good
View detail