Reviews
Bolt hole cracked.
[How is it used?
Installed to prevent oil leakage at Circuit
Was the one you received as per Image?
Street Image
Was the installation difficult?
There was no Instruction Manual, and at first I did not understand what the bracket in the Included Parts:section was for. After installation, I found out that the bracket was to be installed by lowering the cowl to avoid the exhaust pipe.
Installation is not that difficult.
How was your experience with it?
As shown in the photo, the Bolt mounting holes on the Cowl were cracked after only a few runs, whether due to poor installation or slightly poor product dimensions.
However, it may be unavoidable in a sense, since Grom is a Machine with very high vibration.
[Included Parts:were they on?
Bolt、Bracket Only。
[Was there anything that disappointed you?
Cracking. In the meantime, it did not become a fatal Damage, so it is usable.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Tightening the bolt a little bit at a time is recommended, as tightening the bolt too much may cause the cowl to crack. Also, I would like to see an Instruction Manual.
View detail
Some difficulty in installation
[How is it used?
Circuit's Sports driving
Was the one you received as per Image?
As per Image… I thought.
Was the installation difficult?
The hole position was not sober and needed to be fine-tuned with a stick File.
How was your experience with it?
Perfect! It was very Race ish.
[Included Parts:were they on?
Only Cowl to begin with.
[Was there anything that disappointed you?
I knew I wanted the hole to be in the exact position.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are going to Race, you will also need a number seal.
View detail
It was a hard feel.
I used Hard Type, but it has a hard feel, so I guess it is a personal preference.
The sound when rubbing is Large. However, it is quite durable, so the cost performance is good.
View detail
Number Seal Cowl。
I bought it for Circuit, and I like the sharp feeling than Cowl of HRC Grom.
However, although it is White Gel Finishing, it is not a very beautiful finish, so it needs a certain finishing treatment.
(If you don't mind, it's perfectly fine.)
View detail
Slider is required.
Base for installing the Manufacturer's Slider.
The Base itself is neither acceptable nor unacceptable.
I think Slider can be Recommendered.
View detail
Fits: HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSR mini, HONDA NSR80, HONDA NSR50
Style is good!
There is no Instruction Manual and the shape of Seat rubber does not match!
It is useless unless you can process holes to a certain extent, such as drilling and cutting!
Seat shape is cool !!
View detail
The surface is rough
It is Gel Coating, but it was not beautiful enough to paint as it is.
First of all, in order to fill in the fine irregularities on the surface, we have to process the surface with Pate.
Design is nice Parenthesis ♪ It is certain.
View detail
At CYGNUS X 1yp...........
Previously I was using KITACO but purchasing this item with Heador every change in Projectorization. Double-sided tape got removed so paste the 3M at home Finally installed. Result KITACO is better View detail