Reviews
Fits: SUZUKI VANVAN200, SUZUKI GSX-S125, SUZUKI GSX-R1000R, HONDA APE 50, HONDA DIO110, HONDA BENLY50, HONDA BENLY50110 PRO, HONDA BENLY50110, HONDA BENLY50 PRO, HONDA APE 100, SUZUKI GSX-R1000, SUZUKI BURGMAN200, YAMAHA MT-25, YAMAHA MT-07, YAMAHA MT-03, YAMAHA MAJESTYS, YAMAHA CYGNUS 125, YAMAHA CYGNUS X, HONDA APE TypeD
What a quality!
It is subtle in terms of Size.
I think the normal use is to use Side Stand with Handlebar Lock.
Sexy as in the picture, your legs are visible. I wanted it to be just a little bit longer.
Also, the bottom belt broke off after 3 days of use. What kind of quality is this?
The motive for purchasing the product was not only the price, but also the fact that it was written as heat-resistant, so I focused on the fact that I could apply it immediately after returning home, but Belt may have melted due to the heat from the Exhaust System.
As for the Cover, it is Black and has the word Security on it, so it is concealed for the purpose of minimum security. So, Belt is very disappointing because it is Clear.
I honestly want to return it.
View detail
It is made of cast metal and has a sense of weight.
For security purposes, such as when staying overnight on the road
It is recommended to use Reminder Cable for installation.
If you run with the disc brake installed, you will not be able to avoid breaking the disc brake or standing on the ground.
When the key cylinder is pushed in once to lock the door, it beeps once and the AlarmMODE is activated when the door is locked.
If you push it in once and it beeps, then push it again without locking the door, it will beep twice and the Alarm stop mode will be activated.
If you are concerned about sound, such as in a residential area, you should set the Alarm stop MODE.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Better than OEM
Replaced because OEM is too hard to see. Installation was easy. I can't say how visible the OffsetHolder is since it was replaced at the same time, but it is more visible than the NORMAL. View detail
Fits: YAMAHA Cygnus X (SR44J) Rear, YAMAHA Cygnus X (SE44J) Rear, YAMAHA BWS125, YAMAHA BWS125, YAMAHA Cygnus X, YAMAHA Cygnus X
Rear brake lining (OEM equivalent) Keisensha 1~3 type
[How is it used?
I bought it this time for the 3RD jade game as a countermeasure against the expiration of my points.
Except for the Jingjing battle, it can be used for FLAME-X and BW'S125 and GTR125, which share the same EG.
Was the one you received as per Image?
Image (Gold) It was Silver.
The box is too big for shipping.
Was the installation difficult?
It would be super easy, but would require some maintenance skills.
The tightening torque for the rear wheel center axle is about 10 kg. A torque wrench is required.
How was your experience with it?
No difference between OEM and Large. Low cost and usable. Cost-effectiveness is the top priority.
[Included Parts:were they on?
The spring quantity is the same as the spring quantity of the other company's product.:No 2pc, but not particularly troublesome.
[Was there anything that disappointed you?
The friction material used is different, so the bite during braking is inferior to that of Daytona.
I don't really care about it because it's price-applicable.
View detail
Horn Replacement
I'm not sure of the effect yet, but it's a hell of a lot better than the pathetic sound of NORMAL. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
V125S Screw (forward/reverse) must be confirmed
MyMotorcycle V125S Mirror was selected from the hit items in the search from the state that had been set to
Hit, 10mm Normal Thread Screw But when I actually tried to attach it to the vehicle, I found that it was 10mm Opposite Thread Screw was
By year etc, Positive/reverse." It is always better to check the direction of the Screw on the actual car, as there seems to be
As a result, we purchased an additional Conversion Adapter (at a local store because we were in a hurry).
Quality *2:Because Mirror moves due to running vibration (maybe product difference?)
Visibility *2:Because the cut area of the Fashion oval is less visible than the OEM oval due to the reduction in area.
Design★4:Other Brand:Because the sense of product has been improved.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker, KAWASAKI KDX220, KAWASAKI 250TR, KAWASAKI KSR110, SUZUKI RMX250, SUZUKI 250SB, SUZUKI HUSTLER, SUZUKI DJEBEL, YAMAHA TW200, YAMAHA XT250X, YAMAHA TT250R, YAMAHA SEROW, YAMAHA XTZ125, YAMAHA WR250, YAMAHA DT50, YAMAHA PW50, HONDA FTR250, HONDA CRM250R, HONDA CRF450
Anyway, it's the lowest price in Fat bar!
I thought I bought the High type, and it says so in the Package...
I have compared it with Landy's Low type, but the height is the same...
Huh? Isn't it low? Something doesn't seem right. 。 It's probably not your imagination.
The handlebar is quite high on the VST250SX, so I managed to install it with three clamp extensions.
This seems to be a bit of a turnaround...
In addition, since there is a hole in the blinker and the Axel collar, I cut it out and wrap a piece of tape used for tennis racket or bicycle grips around it to prevent it from slipping.
It's working surprisingly well.
View detail
Fits: HONDA monkey, HONDA glom, HONDA CHALY 50, HONDA GORILLA, HONDA glom, HONDA MSX125, HONDA APE, HONDA NS-1, KAWASAKI KSR, Others , HONDA DAX
It was a blast.
It looked great, but it was a blast. w View detail
Design is good, but,
The design and overall construction is good, but I think the quality is commensurate with the price. View detail
There is a problem with the audio
It can be used comfortably from standstill to low speed range.
However, I could not understand what they were saying at all from beyond 60km/h.
I feel that there is a problem with the performance of the Speaker, as it seems to be able to hear our voices.
View detail
It's dark
Halogen is better for this, it is darker. View detail
Fits: HONDA PCX125 (JF28) *Not tested for minor changes since 2012., HONDA PCX125 (JF28) *Not tested for minor changes since 2012.
If only it were 2 cm shorter.
For my approximately 4.0cm DownPCX, this Short Stand is still a bit long
At least specify the total length and dimensions in the product description.
The accuracy of the product is not very high, so there is some rattling.
I think it looks good.
View detail
Fits: SUZUKI WOLF250 [Wolf] VJ21A, SUZUKI TL1000R VT52A, SUZUKI SV650S, SUZUKI SV650 VP52A, SUZUKI SV400S VK53A, SUZUKI SV400 VK53A, SUZUKI RGV250γ VJ21A, SUZUKI RGV250γ VJ21A, SUZUKI RG250γ GJ21A, SUZUKI RG250γ GJ21A, SUZUKI RF600R, SUZUKI Katana 600, SUZUKI Katana 600, SUZUKI INAZUMA400 [INAZUMA] GK7BA, SUZUKI INAZUMA1200 [INAZUMA] GV76A, SUZUKI INAZUMA750 [INAZUMA]., SUZUKI GSX-R750W, SUZUKI GSX-R750W, SUZUKI GSX-R750SP, SUZUKI GSX-R750R
Price suitable
I put it in Rear.
It doesn't stop at a reasonable price.
It did not lock even when I stepped on the Brake quite hard.
Control was a good feeling, so I am satisfied with it.
View detail
Fits: HUSABERG , HUSQVARNA , KTM , TRIKE , ATV_BUGGY , TRIUMPH , HONDA MONKEY, Others , SUZUKI HUSTLER, SUZUKI DJEBEL, SUZUKI RMX250, SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KDX220, KAWASAKI 250TR, HONDA XLR250, KAWASAKI KSR110, HONDA XL230, HONDA XR400 Motard, HONDA CRM250R
Price is right.
Cheap! Price is right, installed on klx230sm. View detail
Fits: その他 12V car
cheap construction
Very cheaply constructed.
No light when inserted deeply, light when inserted lightly, but wobbly.
Obvious defective product or design error
View detail
Cowl Bolt is no longer visible.
I purchased this bolt at the same time as the Screen bolt. The bolt is the same as the Cowl bolt, but the thickness of the bolt that holds the Cowl bolt on the SIDE is different. The standard bolt is 18mm, but I couldn't find a good one, so I used a 20mm bolt. I used a 20mm bolt because I couldn't find a good one. The standard silver color is not bad, but I decided to use black. I think that the black color is more effective than the standard silver color, but I decided to use the black color. I think it's a self-satisfaction and no one will notice it if you don't tell me. I bought a small size plate, so I bought a large size Nylon washer to protect the cowl. View detail
Small Mirror that suits the smallest body
Installed on MONKEY125.
I have a low Handlebar and was looking for a Mirror that could be placed low.
I thought about bar end mirrors, but I felt safer to put them in the normal mounting position.
I use it with OffsetHolder and the visibility is not bad.
View detail
Fits: HUSABERG , HUSQVARNA , KTM , TRIKE , ATV_BUGGY , TRIUMPH , HONDA MONKEY, Others , SUZUKI HUSTLER, SUZUKI DJEBEL, SUZUKI RMX250, SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI KDX220, KAWASAKI 250TR, HONDA XLR250, KAWASAKI KSR110, HONDA XL230, HONDA XR400 Motard, HONDA CRM250R
Good as a dress-up. The price is reasonable and conscientious.
The price is right and the dress-up is good. View detail
… Well, that's just how it is!
I made a hole … or a dent in the helmet and used it. I bought it at some reYouthShop. BT8." It seems to be the successor to the
REMOTE CONTROLLER (Microphone built-in) The BT8 Microphone&REMOTE CONTROLLER extends directly from the LeftSpeaker, while the BT8 Microphone&REMOTE CONTROLLER extends across a fixture that is attached to the outside of the Microphone&REMOTE CONTROLLER. This allows the Tear off the REMOTE CONTROLLER and break it." What a thing will not happen anymore. Maybe. However, I am worried about using it on rainy days because the Microphone will be attached to the outside of the helmet. (The instruction manual says to take it off on rainy days in the first place…) Also, both the SPEAKER and REMOTE CONTROLLER are bigger.
The sound quality is … at this price, it would be foolish to expect anything more. (LOL)
Combining this with the Smartphone Holder makes Navigation very easy to use.
View detail
Fits: HONDA GROM [Grom] (MSX125)
Looks better than Slider
This is one of the Parts that I purchased to make the Grom BlackGold.
However, after I bought it, I realized that I had to remove the Tire in order to install it.
I had neither the equipment nor the experience to remove a tire from a motorcycle, so Jack from "for Vehicle" and I managed to install it by brute force.
Equipment and tools are Large things.
View detail