Reviews
Fits: HONDA MONKEY125, HONDA Monkey 125
I bought it wrong Cannot install on jb03
Quality and texture information is excellent for the price Model jb03 does not need to be installed for usability Purchase and install a 516-1432900 kitaco shift link on model jb02 It's not easy to install Cost performance and low price and low quality compared to other products WeBike packaging is always good. Shipping and packaging will arrive in a week Purchase concerns, precautions, and advice jb03 do not fit.Unable to install after ordering due to incorrect year inquiry... But I recommend it because the price is half the price compared to other brands View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
See Up??
Type that is inserted into the gap between the Body and Lens of Headlight.
The Visor side has a turnover so that it will not rattle when firmly inserted, and the appearance has been dramatically enhanced.
HeadlightQuantity:Pair (for Left and Right) If you remove the screw from the first screw, you also need to loose the next removed Lens, but a Phillips screwdriver is all you need.
When removing and attaching the Bracket that holds the Lens Cover
It was easy to install, although a little hang is required.
View detail
4L Wind Tank
4L style! backslide (^o^) /But the amount of fuel will be a little less than OEMTank, so please be sure you are satisfied with your order before purchasing. View detail
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
footpeg
Used when installing specula
Brake pedal shaft is too inaccurate.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Cospa is good
Purchased additional items because of the good cosmetics.
I use it with White's TL Seat depending on my mood.
The ride is neither good nor bad.
The installation is a normal Seat replacement, but the hole position is
It is a little tight.
View detail
Plating section is Material:Plastic and cheap….
[How is it used?
I bought it to put a reflector next to the headlight to make it look like an old car.
Was the one you received as per Image?
The base part of the plating is made of Material:The large size is about 50mm in diameter, which I think is a good size.
Was the installation difficult?
The M6 Screw was long, so we cut 5mm off and used it.
How was your experience with it?
I am glad I purchased it because it gives off a cheap but good atmosphere.
Durability will be verified in the future.
[Included Parts:were they on?
Rubber cushion for fork mounting is included.
[Was there anything that disappointed you?
Plating part is Material:Plastic and cheap point. (It is actually cheap, but …)
Reproduct such as ▼BRC seems to be a little small in large size, but the foundation is Material:It seems to be Aluminum, so it is difficult to obtain the OEM equivalent.
View detail
Fits: HONDA DAXetc., Others , HONDA MONKEY
cb1100RS MORIWAKIShort Tube without Center Stand
When using cb1100RSMORIWAKIShort Tubewithout Center Stand, the exhaust system will be interfered if the longer attachment is not used. In the side stand condition, the jack with the longer attachment will not fit, so it is a bit dangerous to put the jack in the right position while raising the motorcycle by yourself. It is not recommended to use it in the same way as I do, because the positioning is very troublesome. View detail
as necessary
I bought this to attach Meter to a CUB I am creating.
When I installed it, I wondered if the NLamp's wiring was +Control, but the CUB's wiring did not light up, so I used a quick output Conversion Harness to deal with the problem.
I was concerned that the high beam lamp was too bright. The trip meter knob fell off and went missing during the test run, but I don't care.
View detail
Fits: HONDA Super Cub 50, HONDA little cub, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
I'm just...
When first installed, Lo did not light up.
Switching Valve to something else did not help.
I switched back to the NORMAL terminal and it was perfect.
The rest of the Screw holes are slightly out of alignment.
Well, because it looks good.
View detail
It's good, but …
The holes in the circlip are small, so it was difficult to install the circlip.
I didn't have any difficulty when removing the OEM, but I had a very difficult time assembling this product.
I wish they would make the hole just one more size Larger…
The rest seems fine!
View detail
fashion-conscious
Appearance oriented, self-satisfied, cosmetic? View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Three stars because I don't know the OEM.
I bought a used MONKEY, can't say for sure since I don't know the OEM shape of the color, but I thought it was well made. View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
The most cost-effective Engine when pontooned.
Purchased to replace CUB PRESS
The seals were replaced once before the replacement.
Wiring is absolutely necessary, so some knowledge and skill is required, so if you are not confident, leave it to Shop!
not straight forward
View detail
Fits: HONDA dachshund, HONDA dachshund, HONDA Dax 70, HONDA Dax 70
For Export?
Is it for Ez? It cannot be installed on FOR JAPAN MODEL ones with round holes. (If it has a grid like the one in the photo, it may be OK.) View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA MONKEY, HONDA GORILLA, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
indicator
Cost performance is excellent, but there is a possibility that the lock pin may come off when subjected to impact.
For everyday use, it may be a problem.
View detail
MONKEY5LTank
Paint was a little rough for cost performance. View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
Carburetor is good; Manifold is problematic. Insufficient product description.
OEM Air Cleaner BOX cannot be installed, because it interferes with the OEM cook. Therefore, you will need a separate Manifold, Air Cleaner, and Throttle Wire, and considering the cost, you can choose another manufacturer's carburetor for the same price. If you consider MONKEY as the applicable car model, I think the explanation is insufficient. 。 The included Manifold has a Large inner diameter and the OEM ports and steps are Large. The OEM bolt is also too short to use. The problem with this product is not the carburetor, but the manifold that comes with it, the throttle wire that does not come with it, and the lack of explanation. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
For lighter suspension!
I was prepared for this because the Gold amount is extremely low compared to JAPAN.
The Rim is not shiny and there is BALI around the Wheel, just as I expected.
BALI was lightly polished with Paper and Tire was assembled.
In the driving test, the handlebar was comfortable with no shaking and no body vibration.
I will try to polish Wheel when I have time.
View detail
Fits: HONDA APE 100, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA Ape 100, HONDA Ape Type D, HONDA Ape 50, HONDA monkey
TANAKA TRADING genuine style 120km
I replaced it with my friend's APE100 Big Cab. But the CUSHION and SPEEDOMETER do not fit well, so the fix is not good. (The picture is not updated due to WEBIKE error. I am writing reviews for things I bought now. The file size is the same, but some reviews warn that the picture file is large.) ----------------- ----------------------------------------- I replaced it by replacing it with a friend's APE100 Big Cabe, but CUSHION and SPEEDOTER didn't fit well. (Webike error is not updated. I'm writing reviews for purchases. The file size is the same, but some reviews are warned that the photo files are big) Powered by Google Translator View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Effects unknown
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
I thought it would be better than some Chinese-made one, but after processing, the BALI...
Was the installation difficult?
Installation itself is easy, but Torque control is necessary since it is tightened together with the Crankcase section?
How was your experience with it?
Since I was not originally dissatisfied with Shift change, I could not feel the effect.
[Included Parts:were they on?
Color, Installation Screw
[Was there anything that disappointed you?
Although inexpensive, it is not as good as the quality of FOR JAPAN MODELManufacturer.
View detail