Reviews
COSPA
Anyway, it is a cosmetic product! It was a little bit fast to wear off. View detail
Used in Scooter race
Installed on a 4-stroke JOG.
After confirming that the Sensor responds to the magnet, it is brought into the Course, 10 cm above the mounting ground, and there is no response in Tokushima CartLand.
Next time I will ask CourseOwner if there is a magnetic bar and then try to adjust the Sensor position etc.
View detail
magnetism
By Circuit
The magnetic strength that can be picked up seems to vary
If there are times when you don't pick it up at all and don't even Start.
Start, but by the time you've done three rounds, you've done three rounds.
You can also try to display a wrap.
Circuit is able to measure and display every lap without any problem.
The fact that it is there means that as long as it can pick up magnetism, it should be fine.
I think it depends on the Setting of the user.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
If you like.
It is installed to NSR250R.
It's nice that it's easy to remove without a key, but I thought it was a product of different tastes.
Is the back packing vulnerable to Gasoline? Deformed and melted when removed? It was like.
View detail
It's cheap, but I think it will diminish quickly.
Slider is a RSThailandchi, KUSHITANI, no-name Chinese? It is the impression which used this product.
It's not bad, but it's not good either. I think the Life is not so long because it was the quickest replacement I've ever used.
The impression is that the feeling of rubbing is also soft. I used it because it was cosy, but I think I'll use Kobapura or a hard type next time.
of the Impreza section. "Protection" What does that mean? (LAUGHS)
"Life, durability. I think you should change it to something like
View detail
Enough for an introduction
Motive for purchasing
I bought it to check the time while driving in the Circuit At first, it was good enough for me to know the time, so I used Cue Stars and Dig High technologyLap timers of GPType S, such as spice, have a high The cheapest magnetic type is the LeverLight Lap I decided to try the timer
About the product
The numbers are large and the visibility is good
The information displayed is only the time of the lap, so you can't compare it with other laps while driving Even so, the numbers are still large enough to be visible while driving I think that this is an excellent costumer for those who only need to know the lap time anyway
Connect to the Battery and you don't need batteries
Lap timerBody starts with the Button battery, but it connects to the attached Battery You can use the Wiring function without the Button battery There is a switch to turn on/off the power, but be careful not to leave it on and leave the battery on Let's
Limited to Circuit with embedded porcelain bars
The included magnetic sensor detects and wraps the magnetic bars embedded in the Circuit Unlike GPS, the accuracy is measured by magnetic transit timing, so the accuracy is relatively high (Depending on the position of the Sensor, it may pick up Noise.) But, on the other hand, you can't measure a lap without a porcelain bar, so I'm going to have to get the Circuit running well before I buy it You need to make sure that the porcelain bars are embedded
It's a bit of a hassle to install
The key is the magnetic sensor, but if you are not careful about the position of the magnetic sensor, it will not detect magnetism and will not be able to correctly wrap the lap It cannot be measured Also [Contents] does not even come with a bracket to attach the Sensor to the vehicle by yourself You need to prepare a Bracket to match, and the Lap timerBody is also fine Large size, Quantity:I'm also very careful about the position to set
View detail
![ZiiX Time Gauge Sensor [for Repair]](https://global.webike-cdn.net/photo/impression/61/61548d0a3df41f473a77089b096372adL.jpg)
Fits: その他 ZiiX Lap Timer Time Attacker
Replaced by a sensor failure
I'm using Ziix's TimeA Tucker, and last time I ran it, I burned a Cable and broke it I did Therefore, it is a purchase for Repair
For better or worse, it's a normal-use Lap timer and its Sensor
Some people have written that the Sensor is not sensitive, but it's running rather than sensitive It may be that the magnetic force of Course is weak or it may be a problem with the mounting position
Even Tomin MotorLand, which is said to have relatively weak magnetic force in Kanto, can be used with no problem (Sorry for those involved.)
If it was a little cheaper, $3,000 or $4,000, I'd buy more for another vehicle For $6,000 Sensor, you can put a P-lap or Lapshot on the sub-Motorcycle I think I'll try it
View detail
It is Exactly for introducing Circuit.
? Circuit It was vaguely running at the running meeting, but wearing Time a Tucker knows the concrete time gradually but it is connected to TimeUp.
? There is no problem if the person who can make the plastic can install it. However, in the enclosed Velcro it is insufficient in quantity to purchase separately in 100. Bracket attached to Sensor is also purchased at 100 Yen, processed into L-Type, fixed to Under Cowl with Velcro and Gum Tape. Meter also fixed in Screen with Velcro and Bracket. There is no problem for now.
? During Touring Sensoretc. In Space in Cowling.
? The difficulty is that when Meter gets hot, the liquid crystal turns black and characters can not be read.
? I am glad that it is a little lower price.
View detail
![ZiiX Lap Timer Body [for Repair]](https://img.webike-cdn.net/catalogue/18451/zii_lap_timer_TS.jpg)
One device for installation
How to use is very easy, the visibility of Display is no problem.
One method is necessary to install the magnetic sensor. Because it is a Universal Product, we have to select a mounting position well and purchase Bracket separately. Also, depending on the circuit, it may be difficult to sense magnetism, so it is better to approach the ground as much as possible.
I pasted Display with Magic tape on the Bracket of the included Bracket and Pipe Handlebar.
Since the attached battery was quickly cleared, we recommend that you purchase spares without relying on it.
View detail
![ZiiX Time Gauge Sensor [for Repair]](https://img.webike-cdn.net/catalogue/18451/sens2_1_TS.jpg)
Fits: その他 ZiiX Lap Timer Time Attacker
Purchased as for Repair
Sensor used previously was poorly installed, so it became possible to see the contents while being shaved in the bank, so we bought a new article for Sensor only. Sensor 's response was bad, so I expected to improve it.
So, as for the reaction of Sensor, after all, even if we exchange it for a new article it did not get better...
It seems that it is also in the Course, but it seems like it reacts exactly after 10 cm or less from the ground.
I want the sensitivity of the Sensor to be raised a little more.
View detail
Cospa is nice.
Because Knee Slider is a consumable item, I do not want to hit Cost if possible
But it is not cheap
But Koitsu is about half the price of common products
I am friendly to your Wallet
It's not like saying that things are bad
Well I feel a little cheesy (Lol)
I have enough functions as Knee Slider
The rubbing feeling is not as light as Thailand chi
It seems to be close to KUSHITANI or DEGNER
Shapedly Quantity : Pair (for Left and Right) Because it is designed for exclusive use, up and down Quantity : Pair (for Left and Right) It may be a bad feeling of Fit to replace
I think it's a good Knee Slider if you divide it and use it
View detail
It purchased together with the HID Kit. Although the attachment itself is not difficult and I think also efficiently that it is satisfactory, it is regrettable that it is an option .. It seems that it will come out of the object of a guarantee if the rela
It purchased together with the HID Kit. Although the attachment itself is not difficult and I think also efficiently that it is satisfactory, it is regrettable that it is an option .. It seems that it will come out of the object of a guarantee if the relay here is not attached when attaching a HID Kit. View detail
[Webike Monitor] Since the run has increased in ZZR 1100D9 in the selected reason [ for use ■ ] night, compared with a ■ Merit Halogen, it is bright. It is a great difference although I think that the picture is compared and
[Webike Monitor] Since the run has increased in
ZZR 1100D9 in the selected reason [ for use
■ ]
night, compared with a
■ Merit
Halogen, it is bright.
It is a great difference although I think that the
picture is compared and is known.
He has a feeling called the kana which
■ Demerit
power dissipation went up for a while.
Although
■ impressions
attachment is troublesome, I think whether the result of the part goes up.
cost effectiveness -- honesty -- although it is delicate, isn't it rather good if it is a direction with many
night runs?
■ -- a direction
with many Point
night runs which we can recommend to you -- in the direction it does not run conversely at night, it is unnecessary first.
Since
■ and other Fashion element was unnecessary, it chose 4300k, but it was darker than the brightness which was carrying out
honest expectation.
If
brightness is taken, the Recommendation of the 6000k will be carried out.
View detail