Reviews
Not bad.
It's easy to install as it's a special product. (Old model Jikusa
Because it is a meter visor, there is no wind protection effect, but I feel that it is better to have it than not to have it.
However, I think Parenthesis will become much better if this is added as a dress-up.
View detail
Happy!
There's less wind in my lap.
Winter works sober!
The product system is quintessential! One word! It's easy to install. You've thought this through. I think
You don't see a lot of people wearing it, but it's one of the products I'm glad I bought.
View detail
Excellent wind protection
I bought it for the New Year's Eve Soya Cape for wind and cold protection.
All Screens may be the same, but they are a bit cumbersome to install.
It is installed on the underside of the headlight with the Mirror and the friend tightening.
All you need is a Phillips Screwdriver and a Hexagonal Wrench and you're good to go.
It is quite effective as a wind and cold protection.
You don't have to lie down to let the wind pass over the Helmet.
So I think it's close to windless.
The crosswind was so strong in Hokkaido that I couldn't tell if there was no wind or not (laughs).
The cold wind didn't hit my body, so it worked quite well to keep me warm.
If I were to raise Demerit, I would say two things:looks and air resistance.
As for the appearance, the impression of the Small and cute LITTLE CUB is completely changed because the head looks Large.
As for the air resistance, I felt that the Engine was working a little harder than when I didn't have the Screen because of the Large Screen.
And there's Demerit, but the heady LITTLE CUB is cute too, and I never felt like I couldn't move forward at all due to air resistance.
To begin with, I couldn't get that much speed in Hokkaido in winter (laughs).
It was an excellent screen for wind and cold protection.
View detail
It's pricey.
The good thing is that it can be installed at the same time as the pcx Body Mount Shield.
The Right Side doesn't interfere with the shields, but the Left Side hits when fully locked, so
It is Minus in that respect.
I wish the bottom side was a little larger, but it is OK because I can avoid the wind and rain.
View detail
Fits: YAMAHA APRIO, YAMAHA Remote controller jog, YAMAHA JOG POCHE, YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA JOG, YAMAHA JOG, YAMAHA Axis, YAMAHA Axis, YAMAHA Axis, YAMAHA Axis, YAMAHA JOG Deluxe, YAMAHA JOG
Small rainfall is hardly wet
important item
[Was there anything that disappointed you?
There was nothing in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
Since Axis itself was discontinued more than 20 years ago, the product has not sold well now I know there won't be any, but I'd like to have them because they won't be discontinued somehow I'd like to see Repair Parts continue to be sold at least
[Do you have any products to compare it to?
A CHINA-like fake that is sold on Amazon or something like that
Frequently Asked Items
What made you decide to buy?
We have chosen to use domestic products here for peace of mind
How was your experience with it?
It's almost impossible to get wet if it's only raining, and I'm running with the Helmet's Shield fully open Because visibility is good, it is comfortable in all seasons However, because the Screen is Large, air resistance also becomes Large, the maximum speed is lowered I do That said, though, aerodynamic drag isn't a problem for city driving
Was the installation difficult?
It's not technically difficult, but there are many adjustments to be made, so the overall balance is well balanced It will take some time to take and install
【Please tell me the installation point and hang】
If you put the bracket at a slight angle, the entire screen will be distorted Bracket and other parts need to be adjusted:Pair (for Left and Right) Screen will be distorted if you don't synchronize the angle of the Handlebar Switch of
[Included Parts:were they on?
Adapter & Bracket are included in the package 8mm Opposite Thread Screw for the Yamaha OEMMirror I am
[Others]
If you are using the OEM Mirror, there is nothing wrong with that, but if you are using the Other Brand When using the Product's Mirror, if the screw of the Mirror is 10mm or If you have a Normal Thread Screw, you will need a separate conversion adapter You'll need to purchase and change the Mirror mounting hole diameter on the Bracket from 8mm to 10mm it needs to be expanded to 2.5mm
View detail
Fits: HONDA BENLY50 PRO, HONDA BENLY50110PRO, HONDA BENLY50, HONDA BENLY50, HONDA BENLY50110, HONDA BENLY50 PRO
The storm effect is more than I expected
The height of this product provides considerable wind protection
I don't know what exactly it is because I'm wearing a Full face, but it's probably up to about forehead level Cover
Because of my short stature, the top edge of the screen is a little bit below eye level, which is an eyesore, but I can get used to it I feel fine
It is only used in conjunction with Knuckle Visor
As a corollary
The Screen is blurred and the field of vision through the Screen is uncomfortable, and it is difficult to see the footing on uneven ground It can be a scary thought
View detail
Dramatic improvement in wind resistance
I purchased this product to reduce the running wind on my Jixxer
The delivery time was guided to take about a month from the time of order, but it actually took about two weeks from the time of order
Installation is very simple and easy Car Both Sides ScrewQuantity:2pc removal,?ScrewQuantity:Tighten 2pc, install Screen Bracket, tighten 4 screws, Screen It took me about 15 minutes to complete the job with a 3 footpeg of installation of
The following three points are important for installation
Need #2 Phillips Screwdriver
Overtightening the Screw on the Windshield interferes with the Bracket
When removing the screw on the body side of the car (7,000km), the screw side has no rigidity and the screw is not rigid enough You must carefully remove it with a high-precision tool
With the Visor installed, the height is increased by about 9cm compared to the OEM, and the wind resistance is even better than it looks It was done There is no collapse of design as it is a dedicated product, but rather, it is a product that has become better in Parenthesis It seems It also increased the Handlebar stability at high speeds The height as well as the width of the car may have had a rectification effect
The price seems a bit high, but it is a good quality product with Polycarbonate It's worth the purchase because it's Exclusive Design and it's expected to be effective
It is important to note that the screen changes when storing a vehicle in a sunny location You will need to cover it with the cloth bag that came with it to avoid the possibility of (If you can keep out the sun, buy some at Toweletc.)
In general, it was a good product and I can highly recommend it to anyone who drives fast with a Jixxer Owner!
View detail
Price is high, but performance is expected
I commute to work on the PassPass every day with my Jixxer for about 60km round trip When it is a windy day and there is a headwind, the Grip force of the Front is reduced to the extent that the Front fork is extended So, I decided to buy it to improve it It's not ready for use yet, but it's an Exclusive Design in Polycarbonate It's not ready for use yet, but it's an exclusive design in Polycarbonate Installation is only possible with the #3 Phillips Screwdriver, so the We are looking forward to the performance and serviceability It's a bit Neck that it takes more than a week to deliver because it's a made-to-order product View detail
Fits: Others 50cc-750cc for each company/Pipe handle
I wish I'd put it on sooner
In the case of my motorcycle, the OEM Option product looks good, but the thing is It is small and does not have the high wind protection required for long distance winter touring
I tried the Screen from another company, but the Large single-cylinder Motorcycle had no vibration Large Kiku, I was running around worrying about scratching the body of the car
So, if this ScreenBody is light, it might not vibrate so much I bought it
Installation is easy
If you don't want to scratch the Handlebar with the Mount's parts, you can put a thin rubber between them You might want to do some Wound prevention
You can Firmly install it if you don't pinch anything, though
It's a pretty large device, so if it's high speed, a lot of wind pressure will be applied to the screen, so make sure it's secure!
So, when I ran it, I felt … the driving wind was virtually non-existent from my waist to my face
Of course, the wind will come in, but if you wear your Wears well, you won't feel the cold wind at all
Normally the buttons around the neck of the jacket are fastened tightly, but the other day, even though I opened two of them, they were still on my chest The wind did not come in to
The Screen's vibrations are solid in the Bracket, and thanks to the lightness of the Body, the Screen's vibrations are rapid acceleration It's acceptable to shake a little bit unless you're
I'm glad I put it on because the effect is extremely large, even though it looks tacky to me
That wildness is a good thing with Classic Bike
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI NINJA250R
Wind protection is a nice touch
Installation is easy
It was just a bit thinner than the OEM Screen, or it rattled
I used a 1mm rubber sheet to adjust it
I think it's just a little longer than the OEM, but it's more windproof
[Color] Smoke was darker than I expected I guess that's okay because it looked different
View detail
Small and well-designed
I bought it because I like the design in my opinion!
I also considered the OEM, but I liked this one better (this part is my personal feeling, so I have my objections) (If you are a person, please go through it)
Also, it was made by Asahi Windshield, a company with a long history in windshield design
Installation is easy with a 10mm glasses wrench and a 3mm loofahgon wrench is
(In my case, I had to relocate Antennas for ETC and it took some work
As for the wind protection performance, up to 70~80km/h, the wind at the chest seems to be weak However
With Helmet with Visor, the wind hit the ground more strongly, and the Helmet's Wind Cutting sound is Large
It seems to have become
I'm just guessing, since we haven't driven on the highway yet, but I'm guessing that the air will be flushed further upward at high speeds, so we'll be able to get a better idea of what to expect
I expect it to be comfortable That's what I'm hoping for at the moment
Sorry to be halfway through this report, but both Size and Design are well suited to XSR I think it looks good on you
If you're looking for something easy and stylish, I thought I'd recommend it
View detail
Easy to install Reduces wind pressure at high speed
The wind is very strong when touring at high speed, but the OEMScreen is too large
I bought this one because I don't like it personally
Because the Spanner went in nicely and the parts were accurate
Installation was completed in about 10 minutes without removing any parts
The appearance is a matter of personal preference, but I think it's good-looking
Windproof performance
When I took a test run around the neighborhood after the installation, the wind hitting my chest to belly was gone, but
I didn't feel much of a change from the shoulders up
However This is what it's all about …&hellip And I opened it up at high speed to try it out
In the OEM state, the wind pressure hits you like a slap in the face all over your body
The part where you have to hold on to the Handlebar
After equipping this Screen, you can only feel the wind flowing through the Helmet
I was able to accelerate to Limiter without stress
I was Bigli because I didn't think it would work so well
I want to feel the wind, but high speeds are hard ……
This is a great option for the sports touring crowd that is
The price is a bit high, but considering the accuracy and strength I am happy with it
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Used in YB50
I bought it to use with my YAMAHA YB50
It's a large-textured windshield, but it's very functional and looks great
It's especially useful in the winter, when the wind gets cold
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Retro feeling suits you
This is the Motorcycle windshield of childhood? It is attracted to Retro feeling and purchased and installed in Eliminator 125 and used 1 Season.
Installation of Arm to Handlebar is position adjustment ? Even though angle adjustment is only fixing 2 places with simple UGold thing, Quantity : Pair (for Left and Right) I was somewhat cautious in aligning the alignment of. (Because it is Universal, I think it is due to making it a gold item or simple)
Canvas was easy to install without problems with the position of the canvas and headlight, Blinker lamp which I was worried about before purchasing.
It is an impression after use.
Short Type but Eliminator 125 dedicated to the lower road thinks the windshield effect is sufficient.
I saw some of the canvas rubbed in 1 Season and the hole opened so I think it would be good if you can exchange canvas only by cancellation.
Partial Arm installation etc etc. We note that Rust is likely to occur in the Gold item of.
View detail
very good!!
I really like it. Easy to assemble. However, it is a little difficult to assemble correctly. But I do not think there is as good a windscreen as the Asahi windscreen. And I think it's very flexible and you do not have to worry about breaking down. View detail
Pleasant shopping, windshield matched by lead125
It fits the Lead125 very well, the windproof effect is good during driving, the workmanship is fine, the details are well controlled, and it is integrated with the whole vehicle. It is worth buying. The installation is perfect according to the step by step. , This will be more translucent, the final evaluation of EMS is very awesome! Be sure to patronize a lot in the future! Very suitable for Lead125, the windproof effect is good in the driving, the workmanship is fine, the details are controlled in place, and integrated with the whole vehicle, it is worth buying, the installation is step by step, the perfect installation, fit the model, pay attention to the usual maintenance, wash with water This will be more translucent, and finally EMS is very powerful! There must be a lot of patronage in the future! (translated by Google Translator) View detail
The edge of corner detail is not satisfied
The edge of corner detail is not satisfied(left side). There is a little gap between shield and molding. I can guess that it will became dirty... Other things are good. But, I think you guys should be concentrated to check the stuff. I decided that I will not bring it back... because I know that there is no stock and I don't want to spend additional time...But I want let you know the stuff is not good enough to satisfied. Please pay careful attention. View detail
PetitCustom
Easy to follow and feel good without interfering with Knuckle Garden. Did the wind flow go up slightly !?
Rainy days are still unpruned.
View detail
Windscreen SPC-13
Windscreen of excellent quality, very reliable fasteners, everything is done accurately, the packaging is very reliable! I hope that it will fit Suzuki Vecstar150. View detail
I do not need Green below
I attached it to the w650, Green cloth pulled out while running and it was in the way, I got it. 5000 yen may be cheap! Just Shield is a resin that Pnipni, worried about strength. View detail