Reviews
For those who are concerned about scratches and dirt on the helmet
[How is it used?
I have a helmet holder next to the rear tire,
I am concerned about dirt and scratches on the Helmet, so I used this one.
Was the one you received as per Image?
As per Image, although I was wondering about the Coil type Wire one,
Emphasis on Refreshing when stored.
Was the installation difficult?
Remove the two screws from the lever holder and use the screws provided.
It's easy to reapply.
How was your experience with it?
Just put the Wire through the Helmet and place it on the Tank.
So it is easy to use. No need to carry a key.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not to say I'm disappointed, but when I put away my Wire.
Slightly difficult to wrap around
View detail
Color is Beauty
My wife and I had a hard time mounting two Full faces on one Helmet holder when we Tandem with her.
If you have this, you will have no trouble!
View detail
Savior of OEMHolder
When trying to hook a full face to an OEM helmet holder, it is often more difficult than expected due to the lack of the perfect length.
Especially, iron CUBs have a holder on the rear brake pedal side, so if the Exhaust System Up Type is installed, it may cause a problem if it is hooked up properly due to heat concerns.
The product in question is designed to be threaded through the D Ring of the helmet and secured to the helmet holder with a hole in the upper part, so that the helmet can be easily and safely hooked on the holder.
When not in use, the included Carabiner can be used as a key holder, eliminating the need to worry about storage space.
No need to add an external Holder to the Handlebaretc., so there will be no need to add more keys.
It is a simple and easy product, but I think it is a wonderful product that has caught the blind spot of an idea.
This is the second time I have purchased this product. The product I purchased almost 10 years ago was not damaged, and since it was purchased in conjunction with the increase in the number of vehicles, I believe it is durable enough.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
Easy to use
The vehicle I bought had a KIJIMA helmet lock, but I had trouble hooking the U-shaped hook from the side, so I didn't use it.
It is very easy to use because it is hooked from below.
View detail
Old-fashioned position
The CB1000R does have a helmet holder, but it is under the rear sets. SV650 has a helmet holder that can be placed between handlebar and tank, but CB1000R seems to fall off. I don't like it because it might scratch the tank or something. I bought a helmet holder which is attached to the Tandem Footpeg in the traditional position, and I am glad that it does not seem to damage both the motorcycle and the helmet, although it depends on the shape of the helmet. View detail
Helmet holder
I purchased this along with the Endurance Rear Carrier.
I thought that if I installed Endurance's Rear Carrier, I would not be able to attach the Helmet to the Rear Sets.
There was also a Helmet holder made by another company,
It was stated that if it is the same Endurance, it can be installed at the same time as the Rear Carrier,
I had no hesitation in purchasing the Endurance product.
With this Helmet holder fastened with Key Hook, mounting and dismounting of the helmet was easy.
Once this is installed, it will no longer be a hassle to install the Helmet on the Rear Sets.
View detail
Freedom.
Wire allows for more flexibility in where to place it.
Good for poorly positioned D cans
View detail
Very easy to use
I was looking for something that I could use for my vehicle, which had fallen out of the lineup. I was looking for something that I could use for my vehicle, and although some modification is required, I was able to install it without any discomfort. I recommend it. View detail
practical item
This product fits perfectly into the endurance carrier I purchased earlier. It is by far the best in terms of design and practicality.
Since it can be attached to both sides of the carrier, I plan to order and install it additionally.
Unlike other products, the finish is neat. -------------------------------------------------- -------- It is the perfect product that fits the endurance carrier first purchased. It is the best in design and practical. It can be sweet on both sides of the carrier, so it will be ordered and mounted. Unlike other products, the finish is clean. Powered by Google Translator
View detail
Easy installation.
I am new to Motorcycle (CL250) without a Helmet folder,
I realized that the Helmet folder was very important items for me,
During the break-in period, I purchased a fast-track.
The installation was so easy that it was not enough.
View detail
Fits: BMW F750GS, BMW F850GS, BMW F900R, BMW F750GS, BMW F850GS, BMW F900XR, Others Can be mounted on Φ26.5 Pipe section
Exactly fits
The Limit design is to avoid interference with the BMW Heller Socket. The product itself fits like an OEM Product. View detail
Convenient
It comes on quickly and simply by co-tightening with the OEMTool Box.
The standard wire for the Helmet holder on the CT110 HUNTER CUB is
I am glad I installed this one because it is not that good to look at.
View detail
Wow
Super super fast delivery. This the 3rd or 4th I have ordered (I have owned several Zx14r's and they make good gifts). They fit perfect in the slot. Factory look. First I take the lock to a local locksmith to have him match the key to the ignition key, 10 min and 10 dollars. Bradley needed item on the otherwise perfect bike. View detail
Products you need
Quality and texture information Rubber-covered wires be adequate in length for use Design Information Loop Wire Size Chart Information 44 cm Good cost performance and comparison with other products WeBike packaging is always great, arriving in a week for delivery and packaging Concern, caveats or advice on purchase The helmet holder on the Monkey 125 is mounted in a truly ridiculous place So you can't put a helmet on without these wires I really recommend it View detail
Cl500
I purchased a wire-type helmet fixing lock. It can be fixed to the main body, and it doesn't seem to shake because it's at the rear. In reality, it's not that small. There are also two keys, one to use with a motorcycle key ring and one to keep at home for emergencies. I recommend it ------------------------------------------------ ---------- The helmet fixed lock was purchased as a wire type and could be fixed to the body, and it was unhappy because it was a rear side. I recommend it Powered by Google Translator View detail
HURRICANE Helmet lock
Helmet lock made by KIJIMA until now 。 The Helmet lock made by KIJIMA had to use a Helmet holder, but Made by HURRICANE can be locked without using a Helmet holder because the installation location can be decided relatively freely. The KIJIMA Helmet lock had to be used with a helmet holder, but the Made by HURRICANE can be locked without using a helmet holder because it can be installed in any position.
The U-shaped part that moves when locked is the Quantity:Pair (for Left and Right) The lock hole was not always easy to get into, but this was not a big concern. However, it does not bother me that much. I think Merit is a very good product because it is larger than Merit and I don't have to use the helmet holder anymore.
View detail
problem-solving
I'm a Grom driver.
I have just purchased a high-end helmet, and I couldn't leave it hanging in the mirror, so I came across this product and purchased it immediately.
The Dial key is a good click feeling, and the Helmet can be attached and detached quickly.
I'm glad I bought it
View detail
As if OEM Parts
[How is it used?
Is it normal for Austrians to carry a Helmet when they get off their Motorcycle? Or is it the result of a thorough pursuit of weight reduction? The answer is a mystery, but as a Japanese, it is inconvenient for me because KTM motorcycles are not equipped with a helmet holder as a standard equipment. That's where our KIJIMA-made helmet holder comes in!
Was the one you received as per Image?
Bracket that looks like it could be made by yourself and Quantity of Universal Helmet HolderBody:It is a Set product. But if you make it yourself, it is troublesome, so it is faster to buy it. (Lol)
Was the installation difficult?
The OEMBolt is tightened so firmly that it is difficult to remove the Tandem FootpegBracket. After successfully removing the bracket, apply Screw lock fluid to the Bolt supplied with the product, and tighten the Bolt in accordance with the Instruction Manual to complete the installation.
How was your experience with it?
Convenience is the only word that comes to mind.
[Included Parts:were they on?
A special Bolt and Spacer are included. And KIJIMASticker as a bonus.
[Was there anything that disappointed you?
In case of installing Shoei's Z7Helmet, when hooking the D Ring to the locking part, it is a little troublesome because it has to be operated in a small space.
Other items that would be helpful
Availability and clarity of Instruction Manual:The work procedures are easy to understand because they are explained step by step with drawings with pictures.
Items to buy together:Screw lock liquid
View detail
Helmet lock
The CT110 HUNTER CUB has only a poorly used Wire Helmet lock.
There is no particularly difficult work, just remove the Seat and co-tighten it to the mounting area.
In terms of feel, I think the performance required of the Helmet lock is sufficient.
When used, Helmet will directly touch the car body, so it should be cured if you are concerned about it.
View detail
Helmet lock
Good quality and stylish look. Main thing is user friendly and quick use with out any key.even we can choose different colours according to body colour. While mounting everything things are including even different sizes of screw as well . Locking cable length is completely inough.highly recommend. View detail