Reviews
Fit as per Image
I had avoided helmet locks on the SIDE because of the possibility of scratches on the part where the motorcycle and helmet come in contact with each other or with the adjacent parking lot.
This is an excellent form of locking on top of the Seat or Carrier, as it is somewhat less likely to get wet inside in the event of sudden rain, and it does not fall off, eliminating the above concerns.
The key position is fixed on the Left Side, so it would have been better if I could have chosen both. The key position is fixed on the Left Side, so there is a possibility that it interferes with the Income mounting position.
View detail
The only conforming product
It can be installed safely, and it is sent in such a way that it can be attached without Instruction Manual, and I wonder if it is conscientious. (´-) View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200S, HARLEY-DAVIDSON NIGHTSTER
Absolute peace of mind.
No problems at all with installation as it is a dedicated product. The quality is perfect. View detail
easy to wear
I used KIJIMAHelmet Lock Assist on my Honda TACTA-AF09 and it is very easy to use! The color of the lock assist is beautiful even when installed on a motorcycle. View detail
Hard to use.
My helmet is SHOEI's X-Fourteen and it is hard to wear. The warning also says "…" for SHOEI's Small D Ring, but I am not sure how long it will last. Smaller than a small lion." It is not stated whether it is possible to install the "A" or "B", but it is difficult to do so. This is also due to a lack of confirmation on my part. There is no problem with installation on the body side.
And this product itself has no Lock Function. It is just a hook. I think this should be mentioned in the product description.
View detail
Easy to use
It is useful when you want to stop something else together with the helmet.
The quality is better than the price.
View detail
Helmet holder
[How is it used?
Simultaneous installation with Endurance Carrier
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was easy because the Carrier originally has a hole to install this.
How was your experience with it?
I use it whenever I park and have no problem using it.
It is easy to use
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
As with Carrier installation, it is a good idea to have Screw Lock agent available.
View detail
Fits: HONDA CRF1100L Africa Twin DCT, HONDA CRF1100L Africa Twin Adventure Sports ES DCT, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports DCT, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin DCT, HONDA CRF1000L Africa Twin, KAWASAKI Ninja 1000SX
Easy to install with the License Plate space on any motorcycle.
It was installed on a CRF1100L with SIDEPannier.
Since the SIDE mounting type is impossible, I decided to use this License Plate mounting type. I still have a dream of Tandem, so I think it is good that I can lock two of them.
I wish the keys were communal to Left/Right. Also, the base plate is too sturdy and a bit heavy, so it would be great if it were aluminum.
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Without removing the Seat.
I like that it can be attached to Handlebar.
No need to remove Seat.
View detail
When parking
Easy to attach to a helmet holder when connected to a D-joint View detail
Fits: HONDA CRF1100L Africa Twin DCT, HONDA CRF1100L Africa Twin Adventure Sports ES DCT, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports DCT, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1000L Africa Twin DCT, HONDA CRF1000L Africa Twin, KAWASAKI Ninja 1000SX
Purchased because I don't have a Helmet holder.
The 2012 ninja 1000 does not have a helmet holder, so I bought one instead.
The License Plate Holder I had before had a helmet holder, but when I used the Luggage Hook, there was a possibility that the number would be slightly hidden, which would be a violation of the Road Traffic Law. Therefore, I changed to KIJIMA's License Plate Holder with Helmet Holder.
After installation, NORMAL will not interfere anywhere.
In my case, I am changing the License PlateMounting Bolt to a Security Bolt.
It is better than the previous License Plate Holder in terms of refreshing, but like your review, I am not satisfied with the need to carry two Keys, so I gave it 4 stars.
I am satisfied with the rest.
View detail
Fits: DUCATI Panigale V4, DUCATI Panigale V4 S, DUCATI Panigale V4R, DUCATI Streetfighter V4, DUCATI Streetfighter V4 S
Helmet can be fixed!
[How is it used?
Because it is used without Tandem Footpeg,
There is no difficulty in attaching the Helmet to the Holder.
Was the one you received as per Image?
It is as per Image, as I used to use it on a CBR I used to own.
Was the installation difficult?
Installation was easy, as there is no Tandem Footpeg.
In order to match the color with the periphery, a separate Hexagon Socket Bolt was prepared instead of the supplied Bolt.
When adding the TankUnder Cover, a collar was added between the Holder and the TankUnder Cover, and the Bolt was also replaced with a longer one, as it interferes with the Holder.
How was your experience with it?
Because the Helmet interferes with the Swing Arm and Rear Fender, a ShopTowel is placed between them.
[Included Parts:were they on?
An installation Bolt was included.
[Was there anything that disappointed you?
I felt that it would be good to have the mounting bolt in black to unify the color with the bracket.
View detail
For those who are concerned about scratches and dirt on the helmet
[How is it used?
I have a helmet holder next to the rear tire,
I am concerned about dirt and scratches on the Helmet, so I used this one.
Was the one you received as per Image?
As per Image, although I was wondering about the Coil type Wire one,
Emphasis on Refreshing when stored.
Was the installation difficult?
Remove the two screws from the lever holder and use the screws provided.
It's easy to reapply.
How was your experience with it?
Just put the Wire through the Helmet and place it on the Tank.
So it is easy to use. No need to carry a key.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not to say I'm disappointed, but when I put away my Wire.
Slightly difficult to wrap around
View detail
Color is Beauty
My wife and I had a hard time mounting two Full faces on one Helmet holder when we Tandem with her.
If you have this, you will have no trouble!
View detail
Savior of OEMHolder
When trying to hook a full face to an OEM helmet holder, it is often more difficult than expected due to the lack of the perfect length.
Especially, iron CUBs have a holder on the rear brake pedal side, so if the Exhaust System Up Type is installed, it may cause a problem if it is hooked up properly due to heat concerns.
The product in question is designed to be threaded through the D Ring of the helmet and secured to the helmet holder with a hole in the upper part, so that the helmet can be easily and safely hooked on the holder.
When not in use, the included Carabiner can be used as a key holder, eliminating the need to worry about storage space.
No need to add an external Holder to the Handlebaretc., so there will be no need to add more keys.
It is a simple and easy product, but I think it is a wonderful product that has caught the blind spot of an idea.
This is the second time I have purchased this product. The product I purchased almost 10 years ago was not damaged, and since it was purchased in conjunction with the increase in the number of vehicles, I believe it is durable enough.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
Easy to use
The vehicle I bought had a KIJIMA helmet lock, but I had trouble hooking the U-shaped hook from the side, so I didn't use it.
It is very easy to use because it is hooked from below.
View detail
I can't do without it.
I was looking for OEM helmet holders and found this one in Aftermarket parts. The installation itself is easy with ScrewQuantity.:It is easy to remove 2pcs, but this Quantity:The 2pc screws were so tight with the locking agent that it was very hard to get them off. It's not that the product is bad, but the installation was more strange than I expected. View detail
Fits: HARLEY-DAVIDSON For φ32 pipes of engine guards, etc., HARLEY-DAVIDSON For φ32 pipes of engine guards, etc.
Installed on HarleyEngine Guard
When I leave my motorcycle in the middle of a touring trip, I feel uncomfortable leaving my helmet unattended and unprotected, so I began to consider a helmet holder.
We considered mounting the Engine Guard on the Handlebar because of its appearance.
The only problem is that the Helmet interferes with the Shift Pedal, but unfortunately I can't find any other good place for it.
View detail
Old-fashioned position
The CB1000R does have a helmet holder, but it is under the rear sets. SV650 has a helmet holder that can be placed between handlebar and tank, but CB1000R seems to fall off. I don't like it because it might scratch the tank or something. I bought a helmet holder which is attached to the Tandem Footpeg in the traditional position, and I am glad that it does not seem to damage both the motorcycle and the helmet, although it depends on the shape of the helmet. View detail
Universality seems high.
The item is designed to be used for many types of cars, since it is co-tightened by using the screw for assembling the lever holder.
However, if your motorcycle has an Upper Cowl, you need to make sure that there is no interference with the Cowl. On my Motorcycle, the Clearance was only about 1cm when I cut the Steering to Left.
The length of the wire is also sufficient, and there is enough room even if I put the wire through the helmet after putting it under the Top Bridge as recommended by the manufacturer.
Since I chose Straight Type wire instead of Coil, I felt it was a bit cumbersome to wrap the wire around the bracket when storing it, but I think this is a Level that will become less of a concern as you get used to it.
View detail