Reviews
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Second generation of Beloff Bolt OnLED
I bought a battered 900SS (900SL) and am Restore.
The car body we obtained was equipped with Highly Efficient Halogen Bulbs.
It was fine up to that point, but there is Blue Coating on the surface of Valve. WhiteBeam. It was called
Too nostalgic!
I have no problem with Halogen bulb, but I don't like WhiteBeam too much.
I don't like the deliberate whitish light, the reflection of the blue valve when looking into the light when the light is off, and the fact that the light intensity is reduced due to the blue coating to make the light whitish.
Headlights are a safety priority and should have the maximum amount of light, but to reduce the amount of light for the sake of light color is outrageous.
I wasn't convinced, so I decided to replace it...
The 900SS is a 30-year-old body, and the headlight is made by CEV of Italy, not a reliable domestic product such as Small thread.
It is old, so it is not a multi-reflector, but a glass lens (!). The optical axis is made by a cut of the Glass Lens (!), which is classic.
There is no way that Italians, who are Right Side traffic, would make a serious product for Left Side traffic (Japan, United Kingdom, Australia).
I didn't want to fail due to optical axis gap or insufficient light intensity at the time of vehicle inspection, so I converted to LED aiming to increase light intensity.
It is good that it fits as it is without any extra auxiliary equipment.
No need to cut the Rubber cover behind the Headlight, which is becoming valuable for the Heat sink that pops out.
Unfortunately, however, the 900SS SEV Headlight could not be installed without modification.
Since it is very compact and almost the same size as Halogen bulbs, it is thought that many large vehicles can be fitted without modification, but CEV headlights are made of Material:It is a strange Spec. that fixes Valve with a strange Ring of Plastic.
The hole diameter in this ring is the size of the Halogen bulbLimit, and this product, which has a thicker Scauper sheet, cannot be passed through it.
The hole in the Ring was enlarged by File to allow it to pass through. (I didn't enlarge the ring hole so that a halogen bulb can be used.)
The light intensity is indeed brighter than Halogen bulbs.
The optical axis is also well defined and there are no problems, so it will not fail the inspection.
Since this is an old car body, the white light characteristic of LEDs does not suit it, so we selected a color temperature closest to that of a light bulb.
It is quite yellowish, but even so, it is not as yellowish as Halogen bulbs, so it may be a little disappointing that it is obvious that it is LED.
(I think it's usually a pleasing color scheme, as I have pretty specific tastes!)
View detail
Sense of security.
If you are looking for a Square type, this is the one you should choose.
I personally think that this is the best choice in terms of tightness, design, and quality. I can feel that each item has been inspected one by one, which gives me a sense of security.
I am very happy with the Large size.
View detail
Brightness is no problem
[How is it used?
I bought this for Main's XJR1300C.
We used Rizoma's Fender Eliminator Kit, which came with the Fender Eliminator. [Color] I have been using Clear's LED Tail Lamp, but I wanted to change my mind, so I replaced it with this Smoke Tail Lamp, which has the same mounting pitch as the LED Tail Lamp.
Was the one you received as per Image?
Image Street [Color] Smoke is a nice touch.
I didn't expect it, but it was the exact same Lamp as the Tail lamp that came with Rizoma's Fender Eliminator (lol).
It was probably a Tail lamp from the same country of production (China or Taiwan?). It was a Tail lamp of the same country of production (China or Taiwan?). No way, no way. (LOL).
Was the installation difficult?
There is nothing particularly difficult. The Bullet Type Terminal has already been carefully processed on the Body side.
How was your experience with it?
I am happy with the nice Smoked lens.
[Included Parts:were they on?
Bullet TerminalQuantity for Wiring process on the body side:Set is included.
I didn't use it, but...
[Was there anything that disappointed you?
The Rizoma Tail lens had EMark, but the Mukawa Tail lens did not.
I think they are exactly the same, so it would be more secure to have them when installing them on a motorcycle that is subject to vehicle inspection.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA DAX, HONDA LITTLE CUB, HONDA LITTLE CUB
Sp takegawa smoke tail
Very nice product takegawa as always, quick shipping with good quality of packaging, thank you we bike are the best View detail
No-frills, standard Blinker
Aside from being unbreakable, this is the strongest Blinker with a rustic design that doesn't look bad.
Recommended for those who do not need the extra design just because it is an outside Blinker.
Not only the lens but also the blinker body is rather flexible, so it is unharmed even if it is slightly shaken.
View detail
It's a shame … when it's on.
I would not have bought it if there was a picture of it with the Lens removed. I would not have bought it if there was a picture of the Lens removed. View detail
Headlight LED
Easy to install on GSX400.
No processing is required.
It is considerably brighter.
View detail
Good feeling
The Blinker light emitting part is covered by the Number, so I bought it to expand it outward.
Used for KOSO LED Blinker
It's a nice miscalculation to have a CinderellaFit that looks like it's made to measure, even though they are from different manufacturers.
Satisfied with no cheapness in the texture
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Super Cub custom standard!
I have been searching various mail order sites and I think they are the cheapest and the best quality. My CUB was a little bit cheap, but I just replaced the Lens with a new one, and it gave me a more drilled style. View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA XR50 Motard, HONDA ZOOMER, HONDA ZOOMER, HONDA XR100MOTARD
ZOOMER is now nicer with a Small face. Satisfied so far!
About a week ago, I replaced the blinker of my 2011 WhiteSilver CB400SB with a Clear one, and it looked so solid and the old look was gone. [Color] I replaced it with ClearLamp. I also replaced Seat with a slightly fluffier one. I am very happy with the way it looks like a White horse.
So this time, I replaced the Blinker with a Clear one to refresh the White ZOOMER, which I have adored for many years.
Well, although I really like ZOOMER's twin-light, I don't like the shape of the blinker because it looks like an old lady scooter (because the blinker is square and slightly above the twin-light headlight), so for the past few years I have been replacing it with a round blinker that is as large as possible. I have been replacing the Blinker with one that is round and as large as possible. (Image:VANVAN90, 125, etc., and they are about the same height as the Light). but they were getting scratched and peeled off, so for a change of pace, I went back to the original OEM and went with Clear. But, well, I left the Rear as a Decamble Blinker.
The result is a very Small face. I feel refreshed.
However, I feel like I am back to the old lady Blinker again, so I will replace it with a big round Blinker when I get tired of it.
View detail
Marshall Headlight
[How is it used?
Exchange from OEM
Was the one you received as per Image?
no problem
Was the installation difficult?
Instruction Manual is a little confusing
How was your experience with it?
Brightness appearance was quite satisfactory
[Included Parts:were they on?
no problem
[Was there anything that disappointed you?
I wish the bolts were Stainless Steel.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX400II, KAWASAKI ZEPHYR750
Replacement was easy.
OEM has been cracking due to deterioration.
Purchased for replacement.
I am satisfied with the quality and texture.
Also, all necessary connectors are included in the package.
Replacement is easy
View detail
Fits: KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2
I knew it Marshall.
Marshall and Cat Mark are the best.
Mounting ponting.
View detail
Pimping to 12V square eye CHALY.
Fit is perfect.
Small is not wired.
The fact that it is made of glass is also an added bonus.
Chinese LEDs are installed on these to ensure brightness.
We had a good shopping experience.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF SPECIII
Good product as long as the connector fits
There are several similar LED Tail Lamps sold by HONDA, AP something, Posh, DOREMI, and others.
I looked at many installation articles and youtube, and Posh was the best choice for me, but it was also the most expensive. Of course, I don't know if they are made in Japan or not, but I was thinking of going with DOREMI because Posh and DOREMI at the top seemed somewhat trustworthy, but then I saw them on Yahoo Auctions at a price that looked like they were made in China, so I bought them. (It was DOREMI no matter how you look at it from the picture and the color of the cord)
It said something like "Connector needs to be replaced depending on the year …" but I thought I could probably pimp it out, but unfortunately, my 2011 CB400SB (NC42-130) had the wrong Connector and I immediately went to AMAZON and I ordered DAYTONAHMWaterproof Connector. (Webike is cheaper, but I needed a Large connector as soon as possible.)
I thought I had done a lot of research to make sure I connected the right way, but when I finally finished and tried it out, I found that the connection was not correct. Stop-lamp won't work!!!!"
Honda Motorcycle is Yellow/Green, Green, White/Green, DOREMI is Red, Yellow, Black... I went back to the Net and checked Q&A. The more I looked, the more exceptional answers came up, and I was at my wit's end. So I called the DOREMI head office and asked them to look into it. (They were very polite!). In the end, the answer was Red is for when you step on the Brake, Yellow is for the Tail lamp that is always on, and Black is for Earth. It is certainly the most imaginative shade. It is certainly the easiest shade to imagine. Then the complication is Honda, but I was able to work that out through research.
I took it apart again and looked at it carefully, and found that the black color of Earth was correct, but the red and yellow colors were reversed.
Thanks to the person who answered the phone at DOREMI headquarters, the Stop-lamp now lights up properly. （Thank you very much for your help on the phone at the DOREMI head office.:(I think it would be great if it was a Set)
I know it's a bit presumptuous of me to post my impressions of the DOREMILED Tail Lamp without having bought it from Webike, but I thought it might be troublesome if someone new to MotorcycleMachine, like me, decides to replace it with this product on his/her own. I thought I'd post my impressions.
The product itself is very nice, with the Cushion Tape attached from the beginning and the same size as the original OEM product. So, I have no complaints about the product itself, but the Connector that can convert from 3Pin connector to HMWaterproof Connector is not available in quantity.:I think it would be perfect if it were a Set.
Blinker about a month ago. [Color] I replaced it with Clear and now the Tail lamp. [Color] Since I decided on Clear, I think the color unifies the WhiteSilver CB400SB and makes it look awesome and fearless. I am very satisfied with the result.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
After all, Light is Marshall.
This is Marshall from Mark the Cat.
Replacement was fairly easy.
It is Psycho for the appearance Custom.
View detail
Fits: SUZUKI GSX400, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI GSX1400
It is still this Blinker.
I put it on my CB1000SF and it fits perfectly. View detail