Reviews
Made in Japan for peace of mind
There are plenty of cheap Valves out there, but Valve almost always uses M&H Mats Stripe. I don't remember Trouble until now.
G18 BA15S, but the Valve tip is Lens-like and it is supposed to emit a sharp light.
I certainly feel that way.
Made in Japan.
View detail
Exactly with exclusive products
Used in Touring Main and a little bit in Circuit.
It has protected my Light without coming off.
I now understand why many R1 riders put it on.
View detail
Sure, it's bright, but...
Used for Cub Pro (JA10).
Installation, but Controller does not fit within Light.
It will be installed outside.
It was installed under the FrontBasket.
I ran it and it does indeed brighten up.
However, there is a mysterious light on the Left. This is for oncoming cars and people.
It is thought that it will be dazzling, so I put a Tape on the Headlight.
We made it harder to get out.
The brightness is good, but the light scatters, so that was Minus.
Caution should be exercised by those who are concerned about oncoming illusions.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
Satisfied
I purchased this product to relocate the Blinker when converting to Separate Handlebars. I am satisfied with the quality and feel. View detail
Blinker I just switched from a 10w to an 8w bulb and it doesn't blink.
Simply remove the OEMRelay and install the Mukawa Relay in the same way.
I appreciate that it also comes with two different Adapters.
I would appreciate it more if the price was more affordable!
View detail
It is made of aluminum diecast and has a very good texture!
I looked for the dimensions at the time of purchase, but could not find them clearly, but they were listed on the back of the box when I received it. It seemed a little smaller than what I was expecting.
It is made of Aluminum Diecast, so the texture is quite good. The brightness when lit is also perfect.
It is very good for those who are looking for a Simple form that is not sequential. Recommendation.
View detail
No longer a standard product
The Poly sports headlight has become a staple of Offfor Vehicle headlights.
Similar products are sold at low prices on Amazon, etc., but I have the impression that the difference in price is directly connected to the difference in quality.
In addition to the Rubber Mount that wraps around the Fork, two types of Brackets for adjusting the Headlight position are provided for installation.
View detail
Off-road standard
good point
It seems to be small and unbreakable.
Maintenance is also easy, since the corresponding Valve can be purchased at Home center. (W number confirmation required)
A bad point
Single Bulb, so depending on the year, position modification may be required.
Bullet Terminal has Female and Male, so Large Mortgage Wiring needs to be processed.
Blinker relay in md44 must be replaced
Parts used
12 v10w13tValve×4
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP) ×Quantity:1pc.
UniversalSmall Signal High Speed Switching/Diode 1N4148 100V200mA ×4Co
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-OR-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-SB-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050 type 1 pole F-side Connector1P050-WH-F-tr ×2co.
POSH) Motorcycle accessories Wide watt blinker relay (LED compatible) 3-wire Type 090011-WR ×Quantity:1pc.
Nut or Bolt, RubberWasheretc., number required
The included Valve is 12v8w10t and a little dark, so I changed it to 12v10w13t. The Valve generates a lot of heat, so I think you should inspect it carefully.
Front Blinker's Connector is "Made in USA" and I couldn't get it from Wiring.com.
For position processing, a rectifying diode is inserted in the position line and the turn signal line to prevent reverse current flow. If this is not done, the Indicator will remain on all the time.
I bought all the connectors for the rear blinker from Wiring.com. plus side connectors are in KITACO's ConvenienceParts, but minus side is not available.
The Rear bracket is a Fender Eliminator Kit from DRC, and the Front bracket is an appropriate Bracket that I found at Home center. I was surprised to find that it hooked up EXACTLY.
Blinker relay must be replaced. rally's blinker relay is for LED, but there is information that DRC's LEDFlasher is high flasher, so I thought I could use unbreakable lens with low w number, but it was not possible. I bought a used OEMRelay for md38 and it is a high flasher. It is better to buy ICRelay.
Posh's Blinker relay has a waterproof body, but the connector is exposed and needs to be treated. I wrapped it with tape from Vinyl housefor Repair.
View detail
Fits: HONDA CT110 HUNTER CUB
It's nice to be able to put it on with a snap.
Because I am using Headlight's Coupler with USB power supply.
I was looking for a Fog Lamp that could be powered from another location.
I found this item.
The only thing I have to modify myself is the Bullet Terminal for the ACC power supply.
Wiring according to the Instruction Manual is all that is required to complete the installation.
Power consumption is 60W and Large
It is used during Idling and at low RPMs.
Sounds like you're overloading Battery.
One Side2500lm brightness (Other Manufacturers are about 800ml) Is
Very reliable when driving on pitch-dark country roads and mountain passes.
Both rugged appearance and free mounting position are appreciated.
View detail
Fits: HONDA CBR600RR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It did not work for crf250rally.
Purchased when replacing crf250rallyBlinker.
However, it did not fit the Front Blinker….
The fit is this way.
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP)
View detail
Required for installation of external Blinker!
I purchased this kit to install an external (DAYTONA) Blinker as a modification of the Fender Eliminator Kit.
It was not listed as a compatible car model, but I was able to install it without any problems.
Quantity:1 Set of 4pcs. but Quantity:Pair (for Left and Right) Two sheets are used at a time in the following table.
It was more than double the price of other companies' products, but Material:I chose this product because it was aluminum. I am satisfied with the quality and feel.
View detail
Concept is the best!
The position of the OEMB blinker on the Ninja 250SL is not good anyway (the front side cracks when it rolls over standing up, and the rear side cannot carry a side bag). I was wondering what to do with the Rear blinker, and after much deliberation, I decided to purchase this product. I'm not sure if it's a good idea to use a "Paste Type" blinker, but it's a good idea to use a "Rear Blinker" blinker! View detail
![Z2 Type LED Taillight Set [Exclusive for Fender Eliminator Kit Type II]](https://img.webike-cdn.net/catalogue/images/69679/189-1341_l_TS.jpg)
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Coupler and Bullet Terminal not included
The Harness, Coupler, and Bullet Terminal shown in the product photo are not included in the package. 4 years ago, I purchased the same product from PMC, but about half of the LEDs were not working. The coupler from Tail lamp is an OEM type, and the length of the harness is not long enough because I installed a long tail cowl. I was going to remove the terminal from the Coupler and replace it with the Coupler, but the size of the terminal is completely different, so I cut off the Harness and attached a solder. If the Harness, Coupler, Bullet Terminal, etc. are not included in the package, I think you should replace the picture of the product. If not, I think you should replace the picture of the product. View detail
White is perfect.
Scooter used by my father, who is about to turn 60, since September 2020. [God of thunder Gu Alpha But, in January 2024, it became impossible to turn on the light at the actual mileage of 6,273 km.
It was purchased at a certain Denshin Site, but it had completed 2 years of warranty, so I decided to buy it quickly.
However, I don't want to use LED bulbs of unknown origin.
As I said, Sphere Light took care of us again.
Compared to this EntryType, God of thunder Gu Alpha, the difference is more than 2,000 yen in price, and appearance (Heat Radiation Fin？) is different from Large.
Attaching to the scooter requires no large amount of labor, and anyone with dexterity and fingertips can replace it.
The color emission is 6000Kelvin White color. Once you know this color, you can no longer go back to the bare bulb-like color of the OEMH4 Valve.
(It's a toss-up as to which one looks better farther at night due to differences in power consumption and light quality.)
One year warranty for about 2,800 yen. As expected from Sphere Light.
Please keep it as long as possible.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX1200R, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Estrella.
Very convenient!
ACTIVE's LEDNumber SIDEBlinker Straight I used this product to install a Kawasaki Ninja 250SL for KAWASAKI, and of course it fits just right! This product is a recommendation! View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110
Does not fit 23 year old JA56 products
I ordered several parts from We Bike and installed the ones that fit.
Surprisingly, there are too many incompatible parts.
It does not fit the JA56 model, which is an officially imported product from Korea.
Machining is required when installing. Please keep this in mind when purchasing from Korea.
-------------------------------------------------- -------- We are ordered by ordering various parts from Webike, but there are too many parts that are unexpectedly compatible. It is not suitable for the JA56 model, the official imported product of Korea. When mounted, processing is required. Please refer to the purchase of Koreans. Powered by Google Translator
View detail
It's so bright!
The OEM headlamp was too dark and I was not satisfied with it, so I installed it. As a result, I am satisfied with Large! The brightness is up by 50%. I am very happy to be able to drive quite safely at night on my commute to work and on mountain passes, etc.! However, the durability is a little low, and the low beam went out after about 3 years. But it's tolerable because it's quite bright! Recommendation! View detail
For NSR250R MC18
I used this product for a tail lamp to save power consumption for my old 2nd motorcycle. I purchased this and L8186 at the same time and installed them because the direction of the pin is opposite to the direction of the light as shown in the description of the product. View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 250, KAWASAKI Ninja 400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-4n
Easy
It is easy to install and very nice to be able to sequentialize easily. View detail
JAPAN's peace of mind!
I used it for a Blinker Bulb and installed it to save a little power since I am adding Motorcycle navigator, USB, Fog Lamp, etc. I am happy that it is 40% brighter than OEM and saves electricity! View detail