Reviews
Fits: YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z
StickerTune
Emblem was put up at One point.
It is expensive but looks good.
View detail
Fits: YAMAHA XJ400, YAMAHA FZ250 FAZER
YAMAHAOEM PartsGrommet
I changed the side cover because it came off and almost came off.
OEM is the best for grommets!
View detail
Fits: HONDA VT750CDD, HONDA VT750CDD, HONDA VT750CDD, HONDA VT750CDD, HONDA VT750CDD, HONDA VT750CDD, HONDA VT750CDB, HONDA VT750CDB, HONDA VT750CDB, HONDA VT750CDB, HONDA VT750CDB, HONDA VT750CDB, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2, HONDA VT750CD2
Helmet holder for YZF-R6'08
Helmet Holder M8 Type By processing the
HONDAOEMHelmet holder arrived on YZF-R6.
The black body of the Holder itself has no Logo, so there is no problem to attach it to the YZF-R6, but the key has HONDALogo written on it. Made in KIJIMA Key HolderCNC Type I would like to purchase an Aluminum Cut-out key to make an Aluminum Cut-out key.
At the moment, we are using a carabiner to install the carabiner in a situation where it interferes with the cowl because we wanted to fit it inside the cowl as much as possible, but we will soon be installing a KIJIMA Helmet Lock Assist We would like to see if we can use the
View detail
Fits: KAWASAKI KSR-II, KAWASAKI KSR-II, KAWASAKI KSR-II, KAWASAKI KSR-II, KAWASAKI KSR-II, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
As expected of a dedicated part.
KSR80 and KSR110 have the same Front Fender, so if you replace the Front Fender, you will need this.
It is not required by law, so if you don't care about it, you don't have to put it on, but it is OEM and fits perfectly, so if it costs around 1000 yen, it is better to buy it without any hassle. I think it looks good.
View detail
Fits: YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z
Emblem
The front panel needed to be replaced, so I ordered the Emblem at the same time. I thought about reusing it because of the price, but it was the right decision to get a new Emblem considering the time and effort required to reapply it. View detail
Fits: YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z
It can't be reused.
The front cowl needed to be replaced, so I had to buy a new one. I think it would be difficult to reuse it cleanly, so I prepared a new one.:Pair (for Left and Right) I was able to make the balance of the Gap even, and I was able to paste it beautifully. View detail
Fits: YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z
I was able to purchase it at a very reasonable price.
The front cowl has been damaged and needs to be replaced, but it is very reasonable since it is painted with OEM parts. View detail
Fits: YAMAHA LTS125 AXIS Z, YAMAHA LTS125 AXIS Z
It's very cheap.
I looked up parts to replace the damaged one, but I wondered if it was really available at this price. The price is very reasonable for OEM Parts with Color. I was very impressed with the quality of the product and the packaging. It was a very good purchase. View detail
Fits: YAMAHA ROAD STAR WARRIOR w/flames, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA ROAD STAR WARRIOR w/flames, YAMAHA ROAD STAR WARRIOR w/flames, YAMAHA ROAD STAR WARRIOR CA w/flames, YAMAHA ROAD STAR WARRIOR CA w/flames, YAMAHA ROAD STAR WARRIOR CA, YAMAHA ROAD STAR WARRIOR CA, YAMAHA ROAD STAR WARRIOR, YAMAHA ROAD STAR WARRIOR, YAMAHA ROAD STAR WARRIOR W/ FLAMES, YAMAHA ROAD STAR WARRIOR W/ FLAMES, YAMAHA ROAD STAR WARRIOR W/ FLAMES, YAMAHA ROAD STAR WARRIOR W/ FLAMES, YAMAHA ROAD STAR WARRIOR, YAMAHA ROAD STAR WARRIOR, YAMAHA ROAD STAR WARRIOR
Very happy to use Weblike again
Once again, when looking for OEM Yamaha parts, I have not found a better supplier in Australia or USA for price, or timeliness. Items arrived quickly and well packaged. Very happy and will be using Weblike again. View detail
Fits: YAMAHA XT250L, YAMAHA XT250L, YAMAHA XT350BC, YAMAHA XT350B, YAMAHA XT350AC, YAMAHA XT350A
I never thought I'd see a new one.
I had an OEM Front Fender break on my Race.
It's a 20 year old motorcycle, so I was prepared for this, but as expected, I couldn't find any new OEM parts.
I was at a loss, so I did a search for the most Initial Model and lo and behold!
I was so excited to snap it up.
[How is it used?
SEROW225 (1992 3RW) It is used for
Was the one you received as per Image?
It is a little wide because it is the most Initial Model.
It looks like a squat Camouflage Nohash, and it turned out cute.
Was the installation difficult?
It's easy. Normal and none.
How was your experience with it?
It's not a problem for normal driving, but when the front sinks, such as when landing, it interferes with the tires.
Apparently, the design of Clearance is slightly different from the most Initial Model.
It's acceptable because it's not constantly interfering.
It's a waste, but if it bothers you, just cut off a little tip and it's solved.
[Included Parts:were they on?
That's it.
[Was there anything that disappointed you?
No! Thank you for coming out!
View detail
Fits: YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES
Yamaha OEM Rivet
The original riveting in the trim on the YAMAHA YZF R1. Small rivets, good plastics. The rivet is inserted into the cover plate and pressed against the air duct. Also, rivets are inserted into the inner panel, pressing it against the plastic. View detail
Fits: YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA YZ250FX, YAMAHA SUPER TENERE, YAMAHA SUPER TENERE, YAMAHA YZ250F
Yamaha OEM Collar
Genuine tank bushing for YAMAHA R1 04-06. The sleeve is inserted into the tank and clamped with a bolt. The bolt is screwed into the mount while pressing the tank down. View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA SR400, YAMAHA SR400, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA FZ10, YAMAHA SR400, YAMAHA SR400
YAMAHA OEM BAND, BATTERY
Original battery strap for YAMAHA YZF R1. The strap stretches a little. It holds the battery very well in the motorcycle. Does not chew on the battery. The strap does its job well. The strap bears the YAMAHA symbol. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Yamaha OEM FENDER, FRONT
Original front fender on YAMAHA YZF R1 RN12 05. Fender made of excellent plastic. The wing on the Yamaha R1 05 is large and wide. Performs its function and protects against splashes. For example, on my Yamaha R6 04, the wing was not so large and wide, but the wing efficiency was much worse. I also had an analog wing, and the quality of the plastic is much worse. The plastic is much harder than the original. View detail
Fits: YAMAHA YZ250F1, YAMAHA YZ125F1, YAMAHA YZ125, YAMAHA YZ250G1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
Yamaha OEM Collar
The original bushing in the lining for YAMAHA YZF R1 RN12 05. After the previous owner of the motorcycle there was a lack of bushings in the lining. I bought the missing number of bushings, even bought in stock. The sleeve prevents the plastics from crushing on the linings when the bolt is tightened. The quality of the material is excellent. In the lining, the sleeve sits snugly. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
Yamaha OEM COVER, REAR FENDER 2
The original pad for the Yamaha R1 RN12 05 motorcycle. I bought it from you, because I had it from the hole under the relay. Thanks to you, everything is fine now. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA FZ1, YAMAHA FZ1
Yamaha OEM BAND, Tool
Original rubber band for the tool for YAMAHA YZF R1 RN12 05. The rubber band holds the tool well, does not even move. I bought from you for my motorcycle tool. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
Yamaha OEM COVER, REAR FENDER 1
The original pad for the Yamaha R1 RN12 05 motorcycle. I bought it from you, as mine was cracked and soldered. Thanks to you, everything is fine now. View detail
Fits: YAMAHA R1, YAMAHA R1, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Yamaha OEM Patch
Original rubber pad for Yamaha YZF R1 RN12 05. Rubber is soft. The rubber pad protects against water ingress. A very useful detail. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1
Yamaha OEM PROTECTOR ASSY
I bought from you a new original pad for Yamaha YZF R1 RN12 05. Since my old one melted on the muffler. The quality of the plastic is excellent, strong and soft. View detail